Panasonic Projector PT-CX200E User Manual

ENGLISH - 31
Basic Operation
Basic operations by using the remote control
Using the AUTO SETUP 
function
This function allows you to automatically adjust Input 
search, and Auto PC adjustment during signal input 
from a computer.
 button
Press the  button on the 
remote control.
Note
For details, see “Setting” of Main menu. ( zÆpage 51)
Switching the input signal
You can switch the input signals to project.
 buttons
Press (,, 
, , , or 
) button on the remote 
control.
COMPUTER 1Switch to Computer...

Basic operations by using the remote control
32 - ENGLISH
Basic Operation
Using the KEYSTONE button
This function allows you to correct keystone distortion.
 button
Press the  button on the control panel 
or the remote control. The Keystone dialog box 
appears. Press ▲▼ to correct keystone distortion. 
The keystone adjustment can be stored (Æpage 48).
OperationScreen image
Reduce the 
upper width 
with press 
▲.
Reduce the 
lower width 
with press 
▼.
Note
The white arrows indicate that there is no...

Basic operations by using the remote control
ENGLISH - 33
Basic Operation
Using the AV MUTE function
 button
Press the < AV MUTE> button on the remote control 
to black out the image. To restore to normal, press the 
< AV MUTE> button again or press any button. 
The screen changes each time you press the   z
< AV MUTE> button as follows.
Note
When use the  button to release the [ zAV mute] 
function, the mute function can not be operated at the 
same time.
Using the P-TIMER button
Press the  button on...

Basic operations by using the remote control
34 - ENGLISH
Basic Operation
Using the 3D button
This function allows you to operate the 3D function.
 button
Press  button on the remote control.
Note
For details, see “3D” of "Setting" under Main menu. z
(Æpage 52) 
Using the MUTE button
Press this button on the remote control to select [On] 
to temporarily turn off the sound.
 button
Press  button on the remote 
control. 
Note
To turn the sound back on, press this button again to  z
select [Off] or...

ENGLISH - 35
Settings
Menu Navigation
Navigating through the menu
Operating procedure J
Press the  button.1 ) 
The Main Menu screen appears.
Press ▲▼ to select the Main Menu 2 ) 
item.
Select the desired item from the 9 items: [Input], 
[PC adjust], [Image select], [Image adjust], 
[Screen], [Sound], [Setting], [Information] and 
[Network]. The selected item is highlighted with an 
orange cursor and the submenu of the selected 
item appears on the right.
Press ► or the  button.3 ) 
The submenu appears so...

Menu Navigation
36 - ENGLISH
Settings
Main menu
The main menu consists of the following 9 menu 
items.
When a main menu item is selected, the screen 
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu 
appears, and you can set and adjust the various items 
in the submenu.
 JInput [  ]
Sub-menu itemFactory 
defaultPage
Computer 1RGB38
Computer 2RGB38
HDMI -39
Video -39
S-video -...

Menu Navigation
ENGLISH - 37
Settings
Image adjust [  ]
Sub-menu itemFactory defaultPage
Contrast3244
Brightness3244
Color*13244
Tint*13244
Color temp.Mid44
Red3245
Green3245
Blue3245
Sharpness845
GammaDefault45
Noise reduction*1L145
Progressive*1L1 46
Reset-46
Store- 46
When input video signal to the projector, these *1 : 
functions will be available.
Screen [  J ]
Sub-menu itemFactory defaultPage
Normal - 47
Full - 47
Wide (16:9)- 47
Zoom- 47
True*1- 47
Natural wide*2-47
Custom- 47
Custom adj.- 48...

38 - ENGLISH
Settings
Input menu
Select [Input] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Computer 1: RGB/Component 
/RGB (Scart) 
Press ▲▼ to select [Computer 1]. 1 ) 
Press ► to access the submenu.2 ) 
Press ▲▼ to select [RGB], 3 ) 
[Component] or [RGB(Scart)].
 
Computer 2: RGB
Press ▲▼ to select [Computer 2 (RGB)] 
and then press the  button. 
 JComputer System Selection
This projector automatically tunes...

Input menu
ENGLISH - 39
Settings
HDMI
Press ▲▼to select [HDMI] and then press 
the  button. 
Video
Press ▲▼ to select [Video] and then 
press the  button.
S-video
Press ▲▼ to select [S-video] and then 
press the  button. 
 JVideo System Selection
The projector automatically detects an incoming video 
system, and adjusts itself to optimize its performance.
Note
When the [Input Search] function is set to [On 1] or   z
[On 2] in the [Auto setup] function, the input signal will be 
searched automatically....

40 - ENGLISH
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
AUTO PC adj.
[Auto PC adjustment] function is provided to 
automatically adjust [Fine sync], [Total dots], 
[Horizontal] and [Vertical] positions to conform to your 
computer.
Press ▲▼ to select [AUTO PC adj.] and 
then press the  button. 
[Please wait...] z appears while the [Auto PC 
adjustment] is in process.
To...