Panasonic Projector Pt Ae8000u Operating Instructions

[3D SETTINGS] menu
ENGLISH - 71
Settings
[3D VIEWING MONITOR]
In the 3D video the depth of field effects in front of and 
into the screen are adjusted while confirming on the 
monitor display.
1)  Press the ◄► buttons to select [MODE1] 
- [MODE3], and press the  
button.
 
z The parallax adjustment monitor is displayed.
 
The display content of each mode is described 
below.
2)   Press the ▲▼ buttons to select the 
optimum parallax.
 
z Press the  button to return to 
 
pre-adjustment settings.
 
z Press...

[3D SETTINGS] menu
72 - ENGLISH
Settings
The gauge display of the one-dimensional display on 
the parallax adjustment monitor of [Mode2] or [Mode3] 
indicates the following content:
Blue gaugeDisplays the maximum value of the into 
screen parallax
Red gauge Displays the maximum value of the in 
front of screen parallax
Triangular  point Displays the peak of the parallax of the 
entire image during the last one second 
(left side: In front of screen parallax, right 
side: Into screen parallax)...

[LENS CONTROL] menu
ENGLISH - 73
Settings
Select [LENS CONTROL] from the main menu of 
“Navigating through the menu” (
 page 37), and 
choose an item from the submenu.
 
z After selecting an item, adjust the screen position 
using the ▲▼◄ ► buttons.
Remote contro
lProjector controls\
Note
 
z During the display of 3D images, you cannot use 
[AUTO SWITCHING], [LEFT MASKING AREA], [RIGHT 
MASKING AREA], [UPPER MASKING AREA], [LOWER 
MASKING AREA].
[ZOOM/FOCUS]
[ZOOM/FOCUS] test pattern 1 is displayed....

[LENS CONTROL] menu
74 - ENGLISH
Settings
[LENS MEMORY SAVE]
This enables saving zoom and focus adjustment 
position, horizontal video position, vertical video 
position, adjustment for amount of mask, and aspect 
settings.
LENS MEMORY SAVE
     LENS MEMO RY1
      LENS MEMORY2
      LENS MEMORY3
      LENS MEMORY4
      LENS MEMORY5
      LENS MEMORY6
PI\fTURE
POSITION
LANGUAGE
3\b SETTINGS
LENS \fONTROL OPTION
Ò: Memory with data already stored
Ñ : No data stored
1)  
Press the ▲▼ buttons to select...

[LENS CONTROL] menu
ENGLISH - 75
Settings
 
■ [LENS MEMORY NAME CHANGE]
1)  
Press the ▲▼ buttons to select the 
memory name to be changed.
 LENS MEMORY  NAME CHANGE
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
\fICTURE
\fOSITION
LANGUAGE
3\b SETTINGS
LENS CONTROL
O\fTION
2)   Press the  button.
 
z [LENS MEMORY NAME INPUT] screen is 
displayed.
LENS MEMORY
 NAME INPUT
A BC D E F GH IJ K L M
N O P QR S\f U V W\b Y Z
a b c def g h ij k l m
n o p q r s tu vw x y z
1 2 3 4 5...

[LENS CONTROL] menu
76 - ENGLISH
Settings
[H-AREA POSITION]
You can move the frame area horizontally, such as 
aligning the right or left frame edge to the screen 
edge.Moving left
Moving right
For example, when projecting an overscanned 16:9 
projection area at a 4:3 aspect ratio on a 4:3 aspect 
screen, you can adjust the horizontal discrepancy 
between the screen position and the video display 
position.
 
16:9 projection area 4:3 screen
4:3 video display position
[V-AREA POSITION]
You can move the...

[OPTION] menu
ENGLISH - 77
Settings
[OPTION] menu
Select [OPTION] from the main menu of 
“Navigating through the menu” (
 page 37), 
and choose an item from the submenu.
 
z Select item and use the ◄ ► buttons to switch the 
settings.
Remote contro
lProjector controls\
[ON-SCREEN DISPLAY]
This enables setup related to on-screen display.
Press the  button.
 
z The [ON-SCREEN DISPLAY] menu is displayed.
 ON-SCREEN DISPLAY
 INPUT GUIDE
 OSD DESIGN
 OSD POSITION  DETAILED
 TYPE1
 CENTER
PICTURE
POSITION...

[OPTION] menu
78 - ENGLISH
Settings
[STARTUP LOGO]
You can switch the Panasonic logo that is displayed 
when starting up the projector on/off. 
Switch settingsSwitch settings
[ON]Active
[OFF] Inactive
Note
 
z The logo Panasonic is displayed for 15 seconds.
[AUTO SEARCH]
Sets whether to automatically search for terminals 
that have an input signal when the projector is turned 
on. 
Switch settingsSwitch settings
[ON]
Active
[OFF] Inactive
Attention
 
z Set this to [ON] under normal circumstances.
 
z...

[OPTION] menu
ENGLISH - 79
Settings
[TRIGGER 1/2 SETTING]
You can set the function for each trigger terminal.
The trigger terminals for this projector are used as 
both the input/output terminal for the trigger function 
and the output terminal for the external 3D IR 
Transmitter (optional accessory). This is selected with 
a menu.Attention
 
z You can connect a maximum of two external 3D IR 
Transmitter (optional accessory).
 
z Make sure the  switch of the projector 
is turned  before a cable is...

[OPTION] menu
80 - ENGLISH
Settings
• [BLANK]
When [BLANK] is activated, output is 12 V. If the 
setting is released, output is 0 V.
•  [RS-232C COMMAND LINK]
Receives commands (
 page 103) from external device 
and outputs 12 V.
 
z Input
[POWER ON/OFF]
[BLANK]
• [POWER ON/OFF]
If the trigger input signal from the external device is 
changed from 0 V to 12 V, the projector power will be 
switched on. And if it is changed from 12 V to 0 V, the 
power will be switched off.
•  [BLANK]
If the trigger input...