Panasonic Projector Pt Ae700u Operating Instructions

ENGLISH
-21
Getting started
20-E
NGLISH
Connecting to video equipment
DVD player
Video deckTo S-Video output
To Video output
Video cable
(accessory)
DVD player Equipment such as
an electric screen
NOTE:
BUse the HDMI cable with the HDMI logo.
BWhen connecting to equipment compatible with DVI, use the DVI - HDMI
adapter cable (sold separately).
B
This projector can be connected to HDMI and DVI equipment, but some
equipment may not operate correctly, for example images may not appear
.
ConnectionsNotes on...

ENGLISH
-23
Getting started
22-E
NGLISH
To RGB
output
Operating rangeIf the remote control unit is held so that it is facing directly in front of the
remote control signal receptor, the operating range is within approximately
7 m (23´) from the surfaces of the receptor. Furthermore, the remote control
unit can be operated from an angle of ±30° to the left or right and ±15°
above or below the receptor. #Open the cover.
$Insert the batteries so that the 
polarities are correct, and then close the...

ENGLISH
-25
Basic operation
Press the input select button to select the input signal.BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.&
Input select
button
Changing
signals
Input select
button
Changing
signals Control 
panel
Remote
control 
unit
VIDEO
VIDEO
S-VIDEO
YP
BPR
HDMI
PC
VIDEOS-VIDEO
CMPNT
YP
BPR
PCHDMI
˛ $
˛ &
˛ (
˛ '
˛ ( ˛ *
˛ )
˛ #
Turning on the powerBefore...

ENGLISH
-27
Basic operation
26-E
NGLISH
NOTE:
BDuring projection of an image, the cooling fan will operate, emitting a
small noise as it operates. Turning the lamp on or off will cause this
noise to increase a little.
BBy using the “OPTION” menu to set “LAMP POWER” to “LOW”, the
operating sound of the fan can be reduced. (Refer to page 47.)
BYou can also turn off the power by pressing the POWER button twice or
by holding it down for at least 0.5 seconds.
BWhen the projector is in standby mode (the power...

ENGLISH
-29
Useful functions
28-E
NGLISH
Correcting keystone distortion (KEYSTONE)When either the projector or the screen is tilted, the keystone distortion will
affect the image. You can correct the image proportions by the following
procedure. (Vertical keystone distortion correction only.)Vertical
keystone
distortion
correctionOperation
Press the H H
button.
Press the I I
button.
NOTE:
B
Vertical keystone distortion can be corrected to ±30°of the angle of tilt.
However, the greater the correction...

ENGLISH
-31
Useful functions
30-E
NGLISH
NOTE:
BIf a selected mode does not match the aspect ratio of the input signal, it
may affect the quality of viewing of the original picture.
B
If using this projector in places such as cafes or hotels to display programs
for a commercial purpose or for public presentation, note that if the aspect
ratio selection function is used to change the aspect ratio of the screen
picture, you may be infringing the rights of the original copyright owner for
that program under...

ENGLISH
-33
Useful functions
32-E
NGLISH
CURSORPress the ENTER button to display the cursor (
B).
#Select the color you want to adjust with the cursor.
BPress the F, G, Iand Hbuttons to move the cursor, and then press
the ENTER button.
BThe selected color (
C) and the adjustment menu (
A) will be displayed.
$Adjust the items in the adjustment menu.
BThe color adjusted in the adjustment menu (
D) will be displayed.
COLORAdjusts the deepness of the color.
TINTAdjusts the hue of the color.
BRIGHTAdjusts the...

ENGLISH
-35
Useful functions
34-E
NGLISH
NOTE:
BOnly the settings saved in the “MEMORY SAVE” menu will be
displayed in the “MEMORY LOAD” menu. (Refer to page 42.)NOTE:
BDo not turn off the power while the settings are being saved (it takes
about 5 seconds to save the settings).
BAfter saving the adjusted settings, the “PROFILE” setting will
automatically change to the setting saved in the “PROFILE SAVE”
menu. If you continue to adjust colors to make other profiles, change
the “PROFILE” setting to...

ENGLISH
-37
Adjustments and settings
36-E
NGLISH
On-screen menusMenu screensThe various settings and adjustments for this projector can be carried out by
selecting the operations from on-screen menus.
The general arrangement of these menus is shown below.MAIN MENU
   MENU
KEYSTONE
PICTURE
POSITION
SHUTTER
LANGUAGE
OPTIONSELECT     ENTER      EXIT
       PICTURE
PICTURE MODE  NORMAL
CONTRAST       0
BRIGHT         0
COLOR          0
TINT           0
SHARPNESS      0
COLOR TEMP.     0
DYNAMIC IRIS    ON...

&Press the F F
or G G
button to select an
item, and then press the I I
or H H
button to change or adjust the
setting.
An individual adjustment screen such as
the one shown below will be displayed
for bar scale items.
The bar scale will turn green when any
adjustment changes the setting from the
factory set value. 
For items without any selective arrow or
bar scale, press the ENTER button. The
menu screen for the item will then be
displayed. #Press the MENU button.
$Press the F F
or G G
button to select...