Panasonic Projector Pt Ae4000u Operating Instructions

Menu Navigation
ENGLISH - 21
Settings
POSITION
It is possible to adjust the image size and position. 
 
 
H-POSITION
  (Default: 0)
 V-POSITION
  (Default: 0)
 DOT CLOCK
  (Default: 0)
 CLOCK PHASE
  (Default: 0)
 ASPECT
  4:3  16:9  s16:9 14:9
  ZOOM  ZOOM1  ZOOM2 JUST
  AUTO  H-FIT  V-FIT
 WSS
  ON  OFF
 OVER SCAN
  KEYSTONE
  (Default: 0)
 AUTO SETUP
LANGUAGE
It is possible to change the display language.
 
 
LENS CONTROL
It is possible to adjust the lens position.
 
 
 
ZOOM/FOCUS
  LENS MEMORY LOAD...

Menu Navigation
22 - ENGLISH
Settings
OPTION
It is possible to change the option settings.
 
 
 
INPUT GUIDE
  DETAILED  OFF
  SIMPLE
 OSD DESIGN
  TYPE1  TYPE2
  TYPE3
 OSD POSITION
  CENTER  LOWER LEFT
  LOWER CENTER  LOWER RIGHT
  UPPER LEFT  UPPER CENTER
  UPPER RIGHT
 BACK COLOR
  BLUE  BLACK
 STARTUP LOGO
  ON  OFF
 AUTO SEARCH
  ON  OFF
 HDMI SIGNAL LEVEL
  NORMAL  EXPAND
 FRAME RESPONSE
  NORMAL  FAST
 INSTALLATION
  FRONT/DESK  FRONT/CEILING
  REAR/DESK  REAR/CEILING
 TRIGGER 1/2 SETTING
  OFF...

ENGLISH - 23
Settings
VIERA Link™
Using the Link functions (VIERA Link)
VIERA Link Control
 
J
You can control some functions of the connected equipment 
with this projector remote control.
If you cannot operate, check the settings and the 
 
 
equipment.
For details of the operations for the connected equipment, 
 
 
please read the manual of the equipment.
Access and operate the menu of the equipment
 
Q
Press the 
1.  VIERA Link button and display the 
VIERA LINK menu.
Press ▲ ▼ to select 
2.  VIERA...

VIERA Link™
24 - ENGLISH
Settings
Speaker control
 
J
You can control the theater speaker with this projector remote control.
If you cannot operate, check the settings and the equipment.
 
 
Access and operate the speaker volume
 
Q
Select 1. 
HOME THEATER VOLUME in the VIERA 
LINK menu and press the  ENTER button.
Volume side bar will be displayed.
 
 
Press ◄ ► to adjust the volume of the equipment.
2. 
MUTE setting 
 
Q
Select 1. 
HOME THEATER MUTE in VIERA LINK 
menu and press the  ENTER button.
You...

ENGLISH - 25
Maintenance
TEMP and LAMP Indicators
Managing the indicated problems
If a problem should occur with the projector, the LAMP and/or TEMP 
indicators will inform you. Manage the indicated problems as follows.Confirm the status of all indicators and projector, and switch off 
1. 
the projector in proper way.
Find out the cause of the problem by status of the 
2.  LAMP and/
or TEMP indicators.
Follow the following instruction for each indication and solve 
3. 
the problem.
Turn on the projector...

26 - ENGLISH
Maintenance
Care and Replacement
Cleaning the projector
Before cleaning the projector
 
J
Switch off 
 
 
MAIN POWER in proper way and disconnect the power plug from the wall outlet.
Unplug all the cables from the projector.
 
 
Cleaning the outer surface of the projector
 
J
Wipe off dirt and dust gently with a soft cloth.
If it is difficult to remove the dirt, soak a cloth in water, wring the cloth well and then wipe the projector. Dry off the 
 
 
projector with dry cloth.
Do not use...

Care and Replacement
ENGLISH - 27
Maintenance
Replacing the lamp unit
Before replacing the lamp unit
 
J
Switch off 
 
 
MAIN POWER in proper way and disconnect the power plug from the wall outlet.
Wait for more than 1 hour and make sure the lamp unit and the surrounding\
s are cooled enough.
 
 
Unplug all the cables from the projector.
 
 
Prepare a Phillips-head screwdriver.
 
 
Contact an Authorized Service Center to purchase a replacement lamp unit (ET-LAE4000).
 
 
When the projector is mounted on...

Care and Replacement
28 - ENGLISH
Maintenance
Removing and replacing the lamp unit
 
J
Use a Phillips screwdriver to loosen the 3 lamp 
1. 
unit fixing screws until the screws turn freely.
Lamp unit lock
Lamp unit 
fixing screws
Hold the handle of the lamp unit and release the 
2. 
lamp unit lock in the direction of an arrow.
Pull out the lamp unit gently from the projector.
3.  Replace the new lamp unit while making sure that 
4. 
the direction of insertion is correct.
Press the top of the lamp unit...

ENGLISH - 29
Maintenance
Troubleshooting
Should any problem persist, contact your dealer.
ProblemCauseReference 
page
Power does not turn on.
The power cord may not be connected.
 
 
16
MAIN POWER
 
 
 is turned off. 17
No electric supply is at the wall outlet.
 
 
16
TEMP
 
 
 indicator is lit or flashes. 25
LAMP
 
 
 indicator is lit or flashes. 25
The lamp unit has not been securely installed.
 
 
27
The circuit breakers have tripped.
 
 
-
No picture appears.
The signal input source may not be...

30 - ENGLISH
Appendix
Technical Information
Appendix
Ceiling mount bracket safeguards
The projector and the ceiling mount bracket are designed for sufficient safety. However, make sure the safety cable 
provided with the projector is installed and attached to the bottom of t\
he projector when mounting on the ceiling for 
safety and security.Make sure to use a torque driver and do not use an electrical screwdrive\
r or an impact screwdriver.
 
 
  Torque: 1.25 ± 0.2 N·m
 
 
9 mm
M4×0.7
NOTE:
Even if it...