Panasonic Projector Pt Ae3000e Operating Instructions

LENS CONTROL
ENGLISH - 41
Settings
You can edit named lens memory settings.
QDeleting a memory setting
1. Select LENS MEMORY DELETE and press the 
ENTER button.
2. Select the required lens memory setting and press 
the ENTER button.
3. If you select ALL DELETE, you can delete all of 
the saved lens memory settings.
4. Select OK in the confirmation screen and press the 
ENTER button.
QChanging the name of the memory 
setting
1. Select LENS MEMORY NAME CHANGE and 
press the ENTER button.
2. Select the...

42 - ENGLISH
Settings
FUNCTION BUTTON
You can assign certain menu option to the FUNCTION 
button as shortcut. Press F G I H to select the 
required menu options and press the ENTER button.
QBLANK function
You can stop the projection temporarily for 
electrical power save while the input source is 
stopped. Press any button to escape from the 
blank mode.
QAssignable functions
BUTTON
Remote control Control panel
 See “Navigating through the MENU” on page 29.
 See “Main menu and sub-menu” on page 30....

ENGLISH - 43
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can change the background colour of the menu. 
Press I H to cycle through the options.
 TYPE1Semi transparent black
 TYPE2Solid blue
 TYPE3Semi transparent dark blue
You can change the displaying position of the menu. 
Press I H to cycle through the options.You can choose a screen...

Settings
OPTION menu
44 - ENGLISH
When installing the projector, select the projection 
method according to the projector position. Press I H 
to cycle through the options. See “Projection method” on 
page 15.
You can select the required duration of time and set the 
off timer to turn off the power of the projector 
automatically. 3 minutes before turn-off, the countdown 
of minutes will be displayed in the lower right corner. 
Press I H to cycle through the options.If you use the projector at high...

ENGLISH - 45
Maintenance
TEMP and LAMP Indicators
If a problem should occur with the projector, the LAMP and/or TEMP 
indicators will inform you. Manage the indicated problems as follows.
1. Confirm the status of all indicators and projector, and switch off 
the projector in proper way.
2. Find out the cause of the problem by status of the LAMP and/or 
TEMP indicators.
3. Follow the following instruction for each indication and solve the 
problem.
4. Turn on the projector in the correct way and confirm...

46 - ENGLISH
Maintenance
Care and Replacement
JBefore cleaning the projector
 Switch off the MAIN POWER switch in proper way and disconnect the mains plug from the mains socket.
 Unplug all the cables from the projector.
JCleaning the outer surface of the projector
Wipe off dirt and dust gently with a soft cloth.
 If it is difficult to remove the dirt, soak a cloth in water, wring the cloth well and then wipe the projector. Dry off the 
projector with dry cloth.
 Do not use petroleum benzine, thinner,...

Care and Replacement
ENGLISH - 47
Maintenance
JBefore replacing the lamp unit
 Switch off the MAIN POWER button in proper way and disconnect the mains plug from the mains socket.
 Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.
 Unplug all the cables from the projector.
 Prepare a Phillips-head screwdriver.
 Contact an Authorised Service Centre to purchase a replacement lamp unit (ET-LAE1000).
 When the projector is mounted on the ceiling, do not work...

Maintenance
Care and Replacement
48 - ENGLISH
JRemoving and replacing the lamp unit
1. Use a Phillips screwdriver to loosen the 3  lamp unit 
fixing screws until the screws turn freely. 
2. Hold the handle of the lamp unit and release the 
lamp unit lock.
3. Pull out the lamp unit gently from the projector.4. Replace the new lamp unit while making sure that 
the direction of insertion is correct.
 Press the top of the lamp unit and make sure the unit 
is installed securely.
5. Tighten the lamp unit...

ENGLISH - 49
Maintenance
Troubleshooting
Should any problem persist, contact your dealer.
ProblemCauseReference 
page
Power does not turn on.
 The mains lead may not be connected.
 The MAIN POWER switch is turned off.
 No electric supply is at the mains socket.
 TEMP indicator is lit or flashes.
 LAMP indicator is lit or flashes.
 The lamp unit cover has not been securely installed.
 The circuit breakers have tripped.19
21
19
45
45
47
-
No picture appears.
 The video signal input source may not be...

50 - ENGLISH
Appendix
Technical Information
List of compatible signals
ModeDisplay
Display 
resolution 
(dots)
*1
*1. The “i” appearing after the resolution indicates an interlaced signal.
Scanning 
frequencyDot clock 
frequency
(MHz)Picture 
quality
*2
*2. The following symbols are used to indicate picture quality. 
AA Maximum picture quality can be obtained. 
A Signals are converted by the image processing circuit before picture is projected.
Te r m i n a l sH 
(kHz)V (Hz)
NTSC/NTSC 4.43/
PAL-M/PAL60-...