Panasonic Projector Pt Ae2000e Operating Instructions
Here you can view all the pages of manual Panasonic Projector Pt Ae2000e Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
ENGLISH Operating Instructions LCD Projector Model No.PT-AE2000E Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0234
Page 2
Important Information 2 - ENGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number:PT-AE2000E Serial...
Page 3
Important Information Important Safety Notice ENGLISH - 3 IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark a or the BSI mark ` on the body of the...
Page 4
4 - ENGLISH Contents JQuick stepsImportant Information Important Safety Notice ........................................ 2 Precautions with regard to safety ....................... 6 WARNINGS ................................................................. 6 CAUTIONS .................................................................. 8 Cautions when transporting ......................................... 9 Cautions when installing .............................................. 9 Cautions on use...
Page 5
Preparation Getting Started Basic Operation Settings Maintenance Appendix ENGLISH - 5 Contents Important Infomation Settings Menu Navigation ..................................................28 Main menu and sub-menu ........................................ 28 Navigating through the MENU .................................. 30 PICTURE menu .....................................................31 PICTURE MODE ....................................................... 31 CONTRAST...
Page 6
Important Information 6 - ENGLISH Precautions with regard to safety If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. Check that no more smoke is coming out, and then contact an Authorised Service Centre for repairs. Do not attempt to repair the projector yourself, as this can be dangerous. Do not install this projector in a...
Page 7
Precautions with regard to safety ENGLISH - 7 Important Information Do not use the projector in a bath or shower. Fire or electric shocks can result. Do not place your skin into the light beam while the projector is being used. Strong light is emitted from the projector’s lens. If you place directly into this light, it can hurt or damage your skin. Do not look into the lens while the projector is being used. Strong light is emitted from the projector’s lens. If you look directly into this light,...
Page 8
Precautions with regard to safety 8 - ENGLISH Important Information Do not cover the air inlet port or the air outlet port. Doing so may cause the projector to overheat, which can cause fire or damage to the projector. Do not place the projector in narrow, badly ventilated places such as closets or bookshelves. Do not place the projector on cloth or papers, as these materials could be drawn into the air inlet port. Do not set up the projector in humid or dusty places or in places where the...
Page 9
Precautions with regard to safety ENGLISH - 9 Important Information Ask an Authorised Service Centre to clean inside the projector at least once a year. If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation. It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorised Service Centre to clean the projector when required. Please discuss with the Authorised...
Page 10
Precautions with regard to safety 10 - ENGLISH Important Information In order to get the best picture quality Draw curtains or blinds over any windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Moreover, when not using the...