Panasonic Projector DZ-16K2 User Manual

Chapter 6 Appendix — Technical information
ENGLISH - 211
Compatible signalResolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
1920 x 1200 1   920   x   1   200
61.8 49.9 158.3 R/D/H ― ― ― ― ―
1   920   x   1   200* 1174.0 60.0 154.0 R/D/H
l―
l l*14l*14
1 920 x 1 200*1374.6 59.9 193.3 R― ― ― ― ―
*1 Signals with a  l  in the Plug and play columns are signals described in EDID (extended display identification data) of...

Chapter 6 Appendix — Technical information
212 - ENGLISH
List of 3D compatible signals
(Only for PT-DZ21K2, PT- DS20K2)
The following table specifies the 3D compatible video signals that the projector can project.
 f Abbreviations for input formats and 3D formats in the table have the following meanings.
 gFP: Frame packing format
 gSBS: Side by side format
 gTB: 

Top and bottom format
 gLBL: Line by line format
 gFS: Frame sequential format
 g3G: 3G

- SDI Level B simultaneous format
 gH

- D: HDMI &...

Chapter 6 Appendix — Technical information
ENGLISH - 213
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) HDMI
DVI - DHorizontal
(kHz)Vertical(Hz) FPSBS*1TB FSSBS*1TB LBL FS
1600
 
x
 
900 1
 
600
 
x
 
900 46.4 49.9 96.5 ― ― ― ―
l― ― ―
1
 
600
 
x
 
900 55.9 60.0 119.0 ― ― ― ―
l― ― ―
1600
 
x
 
1200 1
 
600
 
x
 
1
 
200 75.0 60.0 162.0 ― ― ― ―
l― ― ―
1
 
600
 
x
 
1
 
200 61.8 49.9 131.5 ― ― ― ―
l― ― ―
1680
 
x
 
1050 1
 
680
 
x
 
1
 
050 65.3 60.0 146.3 ― ― ― ―
l― ― ―
1...

Chapter 6 Appendix — Technical information
214 - ENGLISH
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) RGB1/RGB2 SDI1/SDI2H-DR1-2S1-2Horizontal
(kHz)Vertical(Hz)SBS*1TBLBLFSSBS*1TBLBL3G
1600
 
x
 
900 1
 
600
 
x
 
900 46.4 49.9 96.5
l― ― ― ― ― ― ― ― ― ―
1
 
600
 
x
 
900 55.9 60.0 119.0
l― ― ― ― ― ― ― ― ― ―
1600
 
x
 
1200 1
 
600
 
x
 
1
 
200 75.0 60.0 162.0
l― ― ― ― ― ― ― ― ― ―
1
 
600
 
x
 
1
 
200 61.8 49.9 131.5
l― ― ― ― ― ― ― ― ― ―
1680
 
x
 
1050 1
 
680
 
x
 
1...

Chapter 6 Appendix — Specifications
ENGLISH - 215
Specifications
The specifications of the projector are as follows.
Power supply200   V - 240   V ~ (200   V - 240   V alternating current), 50   Hz/60   Hz
Power consumption 2
  060   W (11.5  
A)
When [ST

ANDBY MODE] is set to [ECO]: 0.3   W
When [STANDBY MODE] is set to [NORMAL]: 4
  W
DLP chip Size
PT
-

DZ21K224.4
  mm (0.96") (aspect ratio 16:10)
PT
-

DS20K224.1
  mm (0.95") (aspect ratio 4:3)
PT
-

DW17K221.6
  mm (0.85") (aspect ratio...

Chapter 6 Appendix — Specifications
216 - ENGLISH
WeightApprox. 41.0   k] (90.3   lbs.)*3
Noise level*146 dB
Operating 
environment
Operating 
environment 
temperature
*40 °C (32 °F) to 45 °C (113 °F)
Operating 
environment 
humidity 10
  % to 80   % (no condensation)
Remote 
control Power supply
DC 3
  V (AA/R6/LR6 battery x 2)
Operating range Within approx. 30
  m (98'5") (when operated directly in front of signal receiver)
Weight 150
  ] (5.3   ozs.) (including batteries)
Dimensions Width:...

Chapter 6 Appendix — Specifications
ENGLISH - 217
 rApplicable scanning frequency
Refer to “List of compatible signals” ( x   page   209) for the types of video signals that can be used with the 
projector.
For video signal, Y/C signal Horizontal: 15.73   kHz, Vertical: 59.94   Hz; Horizontal: 15.63   kHz, Vertical: 50   Hz
For RGB signal Horizontal: 15
  kHz to 100   kHz, Vertical: 24   Hz to 120   Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 f Dot clock frequency: 162

  MHz or less
For YC...

Chapter 6 Appendix — Specifications
218 - ENGLISH
 rTerminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC/VIDEO x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
VIDEO signal 1.0
 
V [p-p]...

Chapter 6 Appendix — Dimensions
ENGLISH - 219
Dimensions
Unit: mm
244 (9-19/32)310 (12-7/32)
620 (24-13/32) 608 (23-15/16)
488 (19-7/32)
36 (1-13/32)
177 (6-31/32)
291 (11-15/32) 70 (2-3/4)
730 (28-3/4)
* Actual dimensions may dif
fer depending on the product.  

Chapter 6 Appendix — Precautions for attaching the ceiling mount bracket
220 - ENGLISH
Precautions for attaching the ceiling mount bracket
 fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling mount bracket (Model 
No.: ET
-

PKD520H (for high ceilings), ET
-
 PKD520S (for low ceilings), ET
-
 PKD520B (Projector Mount Bracket)). 
The Ceiling mount bracket (Model No.: ET
-

PKD520H (for high ceilings), ET
-
 PKD520S (for low ceilings)) is used 
in combination with the...