Panasonic PC Software Package Wv Asm200 Series Operating Instructions

1011
Application log
Indicates logs filed each time when this software 
obtains information about an alarm or a device error 
occurrence from the recorder, or when an operation 
of this software is made, etc.
The application logs are filed as distinct logs; alarm 
log, device error log, network error log, system log 
and operation log.
Recorder log
Indicates logs filed each time when a recorder error 
or a network error occurred in the recorder.
The recorder logs are generated in the recorder.
The...

1213
Restrictions when operating MPEG-4 or H.264 images
There are following restrictions for each function when MPEG-4 or H.264 \
images are used with this software. 
Read the following before operating this software.
1. When displaying live images
Black screen may be displayed for the first few seconds (*) when the\
 following operations are performed 
•	
while displaying live images in MPEG-4 or H. 264 format. When trying to display live images in MPEG-4 or H. 264 format. (By swit\
ching camera...

1213
	 •	Fast	playback/Fast	reverse	playback
	 •	Frame	playback/Reverse	frame	playback
	 •	Skipping	to	the	next/previous	recorded	image
	 •	Skipping	to	the	point	of	the	set	amount	of	time	forward/backward
	 •	PauseWhen playing images by designating time & date, playback may start from \
a point several seconds (†) after 
•	
the designated time & date. Sometimes, playback may start from the begin\
ning of the next record.
When displaying SXVGA images
•	 , recorded images will be displayed with the...

1415
Operation flow
Startup of the operation softwarez Refer to the "Start/exit the operation software" 
section (☞  page 15) for how to start the operation 
software.
x  Log in to the software.
➜ ➜
Login
† For frequent users, it is unnecessary to log in at 
startup of the software when using the auto login 
function.
  Only an administrator can configure the settings 
for the auto login function.
Note: When a message window is displayed by clicking 
•	
the button on the window, refer to the...

1415
Start/exit the operation software
Start the operation software
Important:Registration of the license is required before using 
•	
this software. This software will not work if the li-
cense is not registered.
Register the license for the software after confirm-
•	
ing that the network adapter of the PC is enabled.
If the license has not been registered using the 
•	
setup software, register it by following from step 2 
to 5. 
Step 1
Select "Operation Software" from "start" menu...

1617
Step 5
Click the [OK] button.
Step 6
Enter the registered user name and password.
Only an administrator is registered when operating 
the software just after the installation.
Enter "ADMIN" for "User name" and "12345" for 
"Password" respectively.
Important: It is necessary to close the setup software to start 
•	
the operation software.  
The operation software will not start unless the 
setup software is closed.
To enhance the security, change the password for 
•...

1617
Exit the operation software
Step 1
Select "Exit(X)..." from "File(F)" on the menu bar or 
click the [×] button at the top right of the operation 
window.
The confirmation window will be displayed.
 
→
Step 2
Click the [OK] button.
The operation software will be closed.
 
→ 

1819
User management
Two types of users, the administrator and the registered users, can be m\
anaged with this software.
Only an administrator can configure the settings of this software. When \
a registered user logged in to the soft-
ware, only the available menus will be displayed according to the user l\
evel setting of this registered user. Only 
an administrator can configure the user level setting of the registered \
users. Refer to the WV-ASM200 Setup 
Instructions (PDF) for how to configure the...

1819
Password’s validation period
The password’s validation period can be determined (31 days/92 days/\
184 days) by an administrator.
When trying to log in after the set period passed, the message window sa\
ying "Please change the password." 
will be displayed.
Note:Even when the validation period has passed, the 
•	
password will be authorized. However, this mes-
sage window will be displayed each time the user 
tries to log in.
Change the password
To enhance the security, change the password...

2021
Step 1
Select "Logout(L)..." under "File(F)" on the menu bar 
or double-click the [Logout] icon on the tool bar.
The confirmation window will be displayed.
 
→
Step 2
Click the [OK] button.
The "Login" window will be displayed.
 
→
Step 3
Enter the registered user name and password.
User switch
It is possible to switch users.
Step 4
Click the [OK] button. The operation window will be displayed.
 
→