Panasonic Pc Software Package Wv Asm100 Operating Instructions

31
Outline of the multi-monitor function
The multi-monitor function using up to three PC monitors is available, and it makes possible to display the operation
window, the live window and map window simultaneously.
Important:
To user the multi-monitor function, it is necessary to install an additional video card on the PC in use. Refer to the
setup instructions (PDF) for further information about the video card compatible with this software.
Note:
Availability of the live window can be determined on the...

32
Live window
The following are descriptions about each item displayed on the live window.
Group information display area
Status of the sequence and the group title will be displayed. Refer to the following section of Group information dis-
play area for further information.
Camera information display area
Status of recording, alarm occurrence and the camera title will be displayed. Refer to the following section of
Camera information display area for further information.
Live image display area
Live...

33
Camera information display area
Pop-up menu
When right-clicking on the image display area, the pop-up menu will be displayed. There are two types of the pop-up
menus as follows.
Group
Select a group to be displayed in the live image display
area from the submenu.
Sequence
Select a sequence to be displayed in the live image
display area from the submenu.
Pause sequence/Resume sequence
Select to pause or resume the sequence display.
Pause sequence is available during the sequence
display and Resume...

34
Map window
The following are descriptions about each item displayed on the map window.
Map selection
Select a map.
Map display area
The selected map will be displayed. The camera icons and the map icons will be displayed on the map.
Map selection
Map display area 

35
Monitor live images
Live images from up to 16 cameras can be displayed simultaneously on this software. It is not only possible to dis-
play live images from cameras connected to the same recorder, but also from cameras connected to different
recorders. It is also possible to display live images directly from the cameras, not through the recorder. 
Important:
•Refer to the setup instructions (PDF) about the models and the versions of the recorders and the cameras to be
used to display live images...

Icon
36
Step 2
Double-click the recorder icon or click the [+] mark next
to the recorder icon.
→The icons of the cameras registered in the recorder
will be displayed.
Icons in the device tree
The following are the descriptions of the icons displayed in the device tree.
*1 Sometimes, live images may not be displayed even when the camera icon indicates that it is online. In this case,
the following are possible causes.
•The Panasonic alarm protocol notification function is not active on the recorder and/or...

37
Monitor images from the selected camera
Click the desired camera icon. Images from the selected camera will be displayed. Images from the camera can be
displayed in various ways; display on a 1-screen, display in the desired area, display on a full screen, etc.
Monitor images on a 1-screen
Step 1
Click the desired camera icon when the image display
area is 1-screen.
→Images from the selected camera will be displayed
on a 1-screen.Note:
When right-clicking on the displayed image, the
pop-up menu will...

38
Monitor images on a full screen
Step 1
Display live images.
→Refer to the Monitor live images section (page
35) for how to display live images.
Note: 
It is also possible to display recorded images on a
full screen. Playback on a full screen is available
only at normal playback speed (1x) and reverse
playback is unavailable.
Step 2
Select Full screen(F) under View(V) on the menu
bar or click the [Full screen] icon on the tool bar.
→The image display area with the information display
area will be...

39
Display images from the cameras registered as a group (group
display)
It is possible to register multiple cameras as a group. When registering multiple groups, images from the cameras
can be displayed in group of the cameras.
Step 1
Click the Group bar on the function panel.
→The Group panel will be displayed.
The name of the registered group and the group
icon that indicates the selected multi-screen will be
displayed.
Group list
The registered groups will be displayed in list form.
Only groups...

40
Display images from the cameras registered as a group
sequentially (sequence display)
Images from the groups registered to display on a 1-screen or 4-screen can be sequentially displayed on a full
screen. It is possible to set the dwell time (sequence interval) for the sequence display.
Notes: 
•Actual dwell time may become longer than the set dwell time when the processing load is too heavy on the
recorder or on the PC (such when many cameras are connected, when displaying live images from many cam-...