Panasonic Pc Software Package Wv As60 Installation Guide

							PC Software Package
Installation Guide
Model No.WV-AS60 
						

							2
LIMIT OF LIABILITY/DISCLAIMER OF
WARRANTY
The author and Matsushita Electric Industrial Co., Ltd. have
used their best efforts in preparing this guide.
However, Matsushita Electric Industrial Co., Ltd. Makes no
representation or warranties with respect to the accuracy or
completeness of the contents of this document and hereby
specifically disclaims any implied warranties or mer-
chantability or fitness for any particular purpose and shall in
no event be liable for any loss of profit or any other commer-
cial damage, including but not limited to special, incidental,
consequential, or other damages.
TRADEMARKS AND REGISTERED
TRADEMARKS
•Adobe®, Adobe logos, and Acrobat®are registered
trademarks of Adobe Systems Incorporated in the U.S.
and/or other countries.
•Microsoft
®, Windows®and Windows®XP are registered
trademarks of Microsoft Corporation in the U.S. and/or
other countries.
•Intel
®and Pentium®are trademarks of Intel Corporation.
•Other names of companies and products contained in
these operating instructions may be trademarks or regis-
tered trademarks of their respective owners.
SYSTEM REQUIREMENT
It is recommended to install this software on a PC that
meets the following system requirements.
OS:Microsoft®Windows®2000 Professional SP4
Microsoft®Windows®XP Professional or Home Edition
SP1
Computer:IBM PC/AT CompatibleCPU:Pentium®4 1.4GHz or fasterMemory:512 MB or moreCD-ROM drive:Required for the installation of this soft-
ware
Hard disk drive:80 MB of available disk space for installa-
tion*
Monitor: 1024 x 768 pixels or more, 16-bit HIGH color or
better
Network Interface:10/100Mbps Network interface card
must be installed
Web Browser:Microsoft®Internet Explorer 6.0 SP1
Other web browsers are not compatible with this software.
*: It is necessary to prepare other disk space exclusively
as storage for files downloaded from the recorder in
addition to the required available disk space for installa-
tion.
Notes:•When a sound card is not installed, it is impossible to
hear audio playback.
•This software must be installed or started by the admin-
istrator. Otherwise, any problems will not be covered by
the warranty. 
						

							INSTALLING THIS SOFTWARE
Install this software as follows.
1. Insert the provided CD-ROM into the PC disk drive.
2. Double click setup.exe.
3. Follow the installation wizard.
Entering the product key (enter 20 alphanumeric char-
acters) will be required during the installation. Enter the
product key written on the provided label.
When the standard installation has been performed,
the folder WV-AS60 will appear in C: \Program
Files\Panasonic. The executable file as60.exe will be
copied in the folder WV-AS60.
START THE SOFTWARE

Select WV-AS60 from the Start menu (Start - All
Programs - Panasonic - Disk Recorder Management
Software - WV-AS60).
The software window will start.

Select WV-AS60 from the Start menu (Start -
Programs - Panasonic - Disk Recorder Management
Software - WV-AS60).
The software window will start.
Refer to the operating instructions (PDF) for descriptions of
how to operate this software.
It is possible to open the operating instructions by selecting
WV-AS60 Online Manual (Start - All Programs -
Panasonic - Recorder management software -  WV-
AS60 Online Manual).
Adobe
®Reader is required to read the operating instruc-
tions (PDF). When the Adobe®Reader is not installed on
the PC, download the latest Adobe®Reader from the
Adobe web site and install it.
3 
						

							UNINSTALLING THIS SOFTWARE (In
case of using Windows XP)
If required, uninstall this software as follows.
1. Open Add/Remove Programs in Control Panel.
2. Select the application to be uninstalled. The uninstall
program will be launched and the wizard will be dis-
played.
3. Follow the uninstall wizard. When uninstall is complet-
ed, the application will be uninstalled from the PC.
STANDARD ACCESSORIES
CD-ROM ...................................................................... 1 pc.
Label (With Product Key) ............................................. 1 pc.
Installation Guide  ......................................................... 1 pc.
4 
						

							5
PRINCIPAL WINDOW CHART
Login
Network mode
Operation window (pages 6
and 7)
When Network mode (N) is
selected for Default screen of
the optional settings (on the
option window), this window
will be displayed after logging
in.
Search result list window (page 8)
Local mode
List display window 
(page 9)
When Local mode (L) is
selected for Default screen of
the optional settings (on the
option window), this window
will be displayed after logging
in.
Playback window (displaying images of a single
file in the playback image display area) (page
10)
Playback window (displaying images of 4 files in
the playback image display area) (page 11)
Refer to the Operating Instructions (PDF) for further information about each window. 
						

							6
THE OPERATION WINDOW IN THE NETWORK MODE
Operation window
qTitle barThe title of the main application will be displayed.
wMenu barThe menu items will be displayed.
Refer to the Operating Instructions (PDF) for further
information about the menu bar.
eTool barThe icons will be displayed.
Refer to the Operating Instructions (PDF) for further
information about the tool bar.
rFAVORITE tabA list of combinations of camera channels and multi-
screen types registered as favorites will be displayed. It
is possible to display images of a desired favorite or
change names of favorites on this tab.
tRECORDER tabRecorders and cameras operable from this application
via a network will be displayed. It is possible to display
live images by selecting a recorder or change regis-
tered information of recorders on this tab.
yImage display areaImages from the recorder will be displayed in this area.
It is possible to split this area into 4, 9 or 16 to display
images from multiple cameras. 
uInformation display areaInformation of displayed images such as playback
speed, recorder title, camera title, the time and date,
the start point and the end point will be displayed in this
area.
u q
w
e
r
t
y
u
o
!0
!1!2
!3i 
						

							iChannel switch buttons
button:Click this button to display images of the
previous channel.
button:Click this button to display images of the
next channel.
oRecorder status display areaThe indicators in this area will show the status of the
recorder (source of images currently displayed).
!0Electronic zoom operation areaIt is possible to perform the electronic zoom operation in
this area.
[x1] button:Displays images in the original size.[x2] button:Displays images in double size.[x4] button:Displays images in quadruple size.
Note: The electronic zoom operation area will be displayed
only when displaying images on a single screen.
!1Camera control tabClick this tab to display the camera control panel.
Perform the camera operations such as zooming, focus-
ing, auto functions, etc. on this panel. Refer to the
Operating Instructions (PDF) for further information
about the camera control panel.
!2Recorder control tabClick this tab to display the recorder control panel. Play
the recorded images or control the recorder on this
panel. Refer to the Operating Instructions (PDF) for fur-
ther information about the recorder control panel.
!3Status barThe latest alarm status of the recorder or information of
a disk designated as storage for downloaded images
such as available disk space. The name of the recorder
currently selected or the camera also will be displayed
on this bar.
7 
						

							8
q
w
e
yt
rq[Recorder select] pull-down buttonSelect the desired recorder from this pull-down button.
When ALL is selected, all the recorders can be
searched.
wResult number display areaThe number of the search results will be displayed in
this area.
eResult list display areaA list of the search results will be displayed in this area.
r[List view] buttonDisplays the search results in list form. 
t[Thumbnail view] buttonDisplays the search results with the thumbnails. 
yPlayback image display areaPlayback images will be displayed in this area. 
uPlayback information displayThe time and date when the image was recorded, the
name of the recorder and the camera channel will be
displayed in this area. 
iPlayback control panelUse the buttons on this panel to operate the recorded
images. 
SEARCH RESULT LIST WINDOW
u
i 
						

							9
OPERATION WINDOWS IN THE LOCAL MODE (LIST DISPLAY WINDOW)
List display window
qTitle barThe title of this software will be displayed.
wMenu barThe menu items will be displayed.
Refer to the Operating Instructions (PDF) for further
information about the menu bar.
eTool barThe buttons of tools will be displayed.
Refer to the Operating Instructions (PDF) for further
information about the tool bar.
r[Alarm log] buttonClick this button to display the alarm logs.
t[File list] buttonClick this button to display the list of the files.
y[List view] buttonClick this button to display the files or the alarm logs in
list form when displaying the thumbnails.
u[Thumbnail view] buttonClick this button to display the files or the alarm logs
with the thumbnails when displaying them in list form.
t
w
i
e
iList display areaThe list of the files or the alarm logs will be displayed in
this area.
oStatus barThe available disk space of the hard disk drive used to
store downloaded images and the latest alarm occur-
rence can be checked on this bar.
The recorder title and the camera title of the images
currently playing will also be displayed. 
u y r q
o 
						

							10
SINGLE FILE PLAYBACK WINDOW
we
q
y t r
qList display areaThe list of the files or the alarm logs will be displayed in
this area.
w[Alarm log] buttonClick this button to display the alarm logs.
e[File list] buttonClick this button to display the list of the files.
rPlayback image display areaThe recorded images will be played in this area.
tEL-ZOOM buttons [x1]/[x2]/[x4]
[x1]:The recorded image will be displayed with normal
size.
[x2]:The recorded image will be displayed with x2
zoomed size.
[x4]:The recorded image will be displayed with x4
zoomed size.
yPlayback control panelOperate during playback using buttons on the playback
control panel. Refer to the Operating Instructions (PDF)
for further information about the playback control panel.