Panasonic Pc L6 Operating Instructions Manual

Operating Instructions
Software
(For Setting Up PCL 6 Emulation Printer Driver)
Before using this software, please read these instructions completely an\
d keep these operating instructions in a safe place for future
reference.
English
Installation Overview
Installation
Setting Up
Model No.  DA-PC800 

2
The following trademarks and registered trademarks are used throughout t\
his manual:
Microsoft, MS-DOS, Windows, Windows NT and Windows Server are either reg\
istered
trademarks or trademarks of Microsoft Corporation in the USA and other c\
ountries.
Microsoft product screen shot(s) reprinted with permission from Micros\
oft Corporation.
i386, i486, Celeron, Intel Centrino and Pentium are trademarks of Intel \
Corporation and its
subsidiaries.
The USB-IF Logos are trademarks of Universal Serial Bus...

3
Table of Contents
Installation Overview
General Installation Overview ........................................................................\
.......................... ...................... 4
Installation
■Installing the Printer Driver, and Utility Software
● System Requirements ........................................................................\
.................................... ................ 6
● Software Setup Procedures...

General Installation Overview
4
Installation Overview
1Turning the Power Switches ON.
Follow the guidelines in this booklet when installing, and setting up th\
e printer driver. Please read all procedures
completely before attempting to setup the PCL 6 Emulation Printer Driver.
Turn ON ( 
 ) the Main Power Switch first,
and then turn ON ( 
 ) the Power Switch.
• DP-8060/8045/8035
Main Power Switch : Rear of the machine.
Power Switch : Left side of the
machine.
• DP-8020P/8020E/8016P
Power Switch : Right...

5
Installation Overview2Installation
■Installing the Printer and Utility
Software
Installing the Printer Driver for the Network
Port Connection. (See pages 6-9)
■Printer for Parallel Port Connection
Installing the Printer Driver for Parallel Port.
(See pages 10-13)
■Printer for USB Port Connection
Installing the Printer Driver for USB Port
(See page 14-21) ● When using the Printer on the Netware network
environment, install the IPX/SPX setup wizard.
Refer to the Operating Instruction (For IPX-SPX
setup...

Installation
6
Installation
Installation
■System Requirements
Installing the Printer Driver, and Utility Software
■ Software Setup Procedures
1.Select the software .
•Printer Driver
When using Print function.
• Job Status Utility
A Job Completion Notice pops-up on your PCs
Desktop when the Copy/Print Job is completed.
2. Install the software.
The selected software will be automatically
installed.
3. Restart the PC.
(See page 7)
(See pages 7-9) (See page 9)
• Personal Computer : IBM PC/AT, and...

7
Installation
■Installing the Printer Driver (Network Port Connection), and the Job S\
tatus Utility
(Completion Notice)
If you choose Custom Install , you
can select the desired Software.
Click  Install , and selected
software will be installed.
1
Insert the  Panasonic Printing
System  CD-ROM.
The opening screen is displayed.
2
Select  Complete Install .
●If the CD-ROM does not launch
automatically, double click  My Computer
on the Desktop or on the Start menu, and
then double click the CD-ROM icon.
●...

Installation
8
Installation
7
The Wizard automatically searches
for machines connected to your
network, and displays the found
units in the Network Printer
Device  window.
●Only the machines connected to your
subnet can to be used as a network printer.
●
If your machine has not been connected to
the network yet, enter its allocated IP
Address, and then click  Next to proceed
with the installation.
■ Installing the Printer Driver (Network Port Connection), and the Job S\
tatus Utility
(Completion Notice)...

9
Installation
8
Select a printer, and then click Next.
9
Select  Enable Communications
(Recommended) , and then click Next.
●Above screen only displays when you are
installing the Job Status Utility on Windows
XP (Service Pack 2 or later).
10
Click  Install .
11
Click Finish .
●If you cannot shut down the computer
immediately, choose  No. I will restart my
computer later. . However, the new setting
is only applied after rebooting your computer. 

Installation
10
Installation
■Installing the Printer Driver for Parallel Port Connection
● Parallel Port Connection is only available for DP-8060/8045/8035
1
Insert the  Panasonic Printing
System  CD-ROM.
The opening screen is displayed.
2
Select  Printer Driver Install .
Printer for Parallel Port Connection
●If the CD-ROM does not launch
automatically, double-click  My Computer
on the Desktop or on the Start menu, and
then double-click the CD-ROM icon.
1. Select the Printer Driver.
2. Install the...