Home
>
Panasonic
>
TV Video Accessories
>
Panasonic Network Interface Unit Wj Nt304 Operating Instructions
Panasonic Network Interface Unit Wj Nt304 Operating Instructions
Here you can view all the pages of manual Panasonic Network Interface Unit Wj Nt304 Operating Instructions. The Panasonic manuals for TV Video Accessories are available online for free. You can easily download all the documents as PDF.
Page 11
11 MPEG-4 Visual patent portfolio license This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard (MPEG-4 Video) and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any...
Page 12
12 Major Operating Controls and Their Functions LINK RCV SNDOPERATE Network Interface Unit WJ-NT304 WJ-NT304 w q Front cover e u y rt qOperation Indicator (OPERATE) This LED will light when the power is on. Important: • The LED will blink for around 2 minutes until the unit becomes ready to operate. • When the temperature is below 0 °C, it may take time until the unit becomes ready to operate. wStatus indicators Link (LINK):This LED will light when accessing to a network. Receive (RCV):This LED will...
Page 13
qVideo input connectors 1 to 4 (VIDEO IN 1 to 4) (BNC, 75 Ω, with auto termination) These connectors accept video input signals from cam- eras or recorders. wVideo output connectors 1 to 4 (VIDEO OUT 1 to 4) (BNC, loop-thru) These connectors loop thru video input signals sup- plied to VIDEO IN connectors 1 to 4. eAudio input connector (AUDIO IN) RCA audio cable is connected to this connector. rAudio output connector (AUDIO OUT) This connector (RCA pin jack) supplies audio output signal. Connect the...
Page 14
14 Rack Mounting Remove the rubber feet. zRemove the rubber feet (4 pcs.) on the bottom of the unit. xInstall the rack mounting brackets (Option: Refer to the following.) on both sides of the unit. Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them firmly. 1. When installing one unit: Model No.: WV-Q204/1S • Rack mounting bracket (Large) x 1 • Rack mounting bracket (Small) x 1 • Rack mounting screws (M3 x 8: 6 pcs.) 2. When installing two units: Model No.: WV-Q204/2S • Rack...
Page 15
When connecting to a network using a PoE device (hub) LAN cable (category 5 or better, straight) When connecting with a PC directly LAN cable (category 5 or better, cross) Important: • Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX. • Power supply is required for each network interface unit. • When using two or more channels, use the following devices. Network Disk Recorder: WJ-ND200 (Ver.1.1 or later), WJ-ND300 (Ver.4.0 or later), WJ-ND300A (Ver.4.0 or later) PC Software...
Page 16
cInsert an SD memory card into the SD memory card slot. vAttach the cover and tighten the screw. bClose the front cover. 16 zOpen the front cover. xDetach the SD memory card slot cover by loosening the screw. Insert/Remove an SD Memory Card LINKRCVSNDOPERATE Network Interiace Unit WJ-NT304 Front cover LINKRCV SNDOPERATE SD memory card slot cover LINKRCV SNDOPERATE SD memory card slot How to remove the SD memory card Important: • Before removing the SD memory card, select Not use for About SD memory card...
Page 17
17 Configure the Network Settings Install the software Before installing the software, read the readme file on the provided CD-ROM first. Software included on the provided CD-ROM • Panasonic IP Setup Software Configure the network settings of the unit. Refer to the following for further information. • Viewer Software Network Camera View3 It is necessary to install the viewer software Network Camera View3 to display images on a PC. Install the viewer software by double-clicking the nwcv3 setup.exe icon...
Page 18
Check if the DC plug of AC adapter is properly inserted into the DC IN jack of this monitor. Check if the power cord is properly inserted into the AC adapter. •In some cases, setup menus displayed with non- interlace signals cannot be transmitted. Setup menus of matrix switcher systems use non- interlace signals, and transmission may be impossi- ble via this unit. 18 •The power cord, AC inlet or the power plug is damaged. If you continue to use it, a fire or an electric shock may occur. Unplug the power...
Page 19
19 Specifications Network Interface Unit Power source: 12 V DC, 1.0 A (using the supplied AC adapter) Power consumption: Approx. 12 W Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}* 1 Ambient humidity: Less than 90 % Video input connectors: NTSC model: 1 V [P-P]/75 Ω(BNC x 4), NTSC composite video signal PAL model: 1 V [P-P]/75 Ω(BNC x 4), PAL composite video signal Video output connectors: NTSC model: 1 V [P-P]/75 Ω(BNC x 4), active loop-thru output NTSC composite video signal PAL model: 1 V...
Page 20
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local...