Panasonic Network Disk Recorder Wj Nd400 Quick Reference Guide

							LCD[ESC] button
[SET] button
Arrow buttons
Quick Reference Guide
The Quick Reference Guide provides simple explanations of how to operate this recorder.
■ Network settings
Configure the network settings such as the IP address, subnet mask, etc. for each port.
ItemCamera port
[PT#1] Client PC port 
[PT#2] Maintenance port 
[PT#3]
DHCP _
OFF _
IP address 192.168.0.250 192.168.1.250 192.168.2.250
Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0
Default gateway _
192.168.1.1 _
HTTP port _
80 _
●
 Default network settings
Network Disk Recorder
WJ-ND400K, WJ-ND400K/G
● IP address setup display ● How to configure the network settings
Repeat pressing the arrow button (up  
or down) until the "IP Address Setup" 
indication is displayed. When the "IP
Address Setup" indication is displayed, 
press the [SET] button.
	 •	 The	current	selected	setup	item	or	 
a value will be indicated by the 
underscore mark "_".  
→  The setup window will be displayed.
	 •	 When	the	underscore	mark	"_"	is	 below the ">" indication,
    Arrow button (left or right): Select a 
port number
    Arrow button (up or down): Select a 
setup item
Press the [SET] button while the under-
score mark (_) is displayed below the ">" 
indication.  
→  The underscore mark "_" will move 
below a setting value and the  
editing of the settings became 
enabled.
Move the underscore mark below the 
number to be edited. 	 •	 Arrow	button	(left	or	right):	Move	the	
underscore mark "_"
	 •	 Arrow	button	(up	or	down):	Enter	a	 value
To determine the edited setting, move 
the underscore mark below the ">" indi-
cation by pressing the [ESC] button.
To display the time and date display 
(standby display) again, press the [ESC] 
button again.
■  Display the operation window
Display the operation window using a web browser installed on a PC.
Launch a web browser. After the web 
browser starts, enter the IP address set  
to this recorder in the address box, and 
press the enter key.  
→  The user authentication window will 
be displayed.
Enter the registered user name and  
password to log in to the recorder.
	 •	 Default
    User name:  ADMIN
    Password:  12345
Click the [login] button.  
→  The top page of the operation window 
will be displayed.
	 •	 When	the	top	page	is	displayed	for	 the first time, the install wizard of the 
ActiveX control will be displayed. 
Follow the instructions of the wizard.
[SET] 
						

							■ User interface on the operation window
o q
i w e r
t
y
u
	q [Control] button: Search and play recorded images,  
switch the camera channels, etc.
	w  [Cam. Select] button: Select the camera channel from 
which images are to be displayed.
	e  [Setup] button: Configure the settings of the recorder.
	r  Status display area: The status of the recorder such as  
the recording status, playback status, etc. will be displayed.
	t  Current time display area: The current time will be dis-
played.
	y  Image display area: Live images/recorded images will be 
displayed.
	u  Playback point operation area: Designate a point to be 
played or play the latest recorded image.
	i  [HDD] tab: Control playback operation.
	o  [CAM] tab: Control the camera operation (zoom, focus,  
auto function, etc.).
■  Basic settings
Configure the minimum required settings to operate the recorder.
Click the [Setup] button, and then click 
the [Quick] button.
Set the current time and date.
Click the [Set] button just below the 
"Time & date" setting.  
→  The "Quick" page will be displayed.
1. Set the current time
2. Register cameras
Select a port to which cameras are  
connected to detect them.  
→  Select the camera port or the client 
PC port.
Determine how to assign and register  
an IP address of the detected camera.  
→  Select [Register the IP address  
automatically given by this unit to a 
detected camera] or [Register the  
IP address set with a detected  
camera].
Click the [Registration] button, and then 
click the [OK] button.  
→  The "Camera registration result"  
window will be displayed after the 
registration is complete.
Check the registration results, and then 
click the [OK] button.  
→  Up to 64 cameras can be registered.
	 •	 When	the	desired	camera	is	not	 detected or when the settings of a 
camera are required to be  
changed, configure the settings on 
the "NW camera" page.
3. Program
When the camera registration is com-
plete, the recording rate for the live 
image transmission and manual record-
ing on the "Program" page will automati-
cally be set to "1 ips".
Click the [Display] button to check the 
detailed settings of "Program".
➜ ➜ 
						

							Click the [Cam. Select] button. →  A list of the registered cameras will 
be displayed in the [Cam. Select] 
box.
Click the "WJ-ND400" icon, the group 
title and the camera title in order.  
→  Live images from the selected cam-
era channel will be displayed on a 
1-screen.
Click the [Multiscreen select] button.  →  Live images from the cameras (regis-
tered as a group) will be displayed on 
a 4-screen.
	 •	 Each	time	the	[Multiscreen	select]	 button is clicked, live images from 
the registered camera groups will be 
displayed.
■ Monitor live images
Display live images on a 1-screen or on a 4-screen (multiscreen).
Click the [Cam. Select] button, and then 
click the [Sequence] button.  
→  Live images from the cameras will  
be displayed sequentially.
	 •	 The	indicator	on	the	[Sequence]	  button will light green and the "SEQ" 
indication will be displayed in the  
status display area.
Click the [Sequence] button again.  →  The indicator on the [Sequence]  
button will go off and the sequential 
display of live images will stop.
Display live images from the cameras sequentially (sequential display).
■ Control cameras
It is possible to operate cameras with the panning/tilting function on t\
he [CAM] tab.
Click the [▲] button in the [REC] box on 
the [HDD] tab.  
→  Repeat clicking the [▲] button until 
the [Recording] button and the 
[Recording stop] button are dis-
played.
Click the recording button 
 (red).  
→  Recording will start and the [REC] 
indicator in the status display area 
will light red.
Click the recording stop button 
  
(yellow).  
→  Recording will stop and the [REC] 
indicator in the status display area 
will disappear.
	q
 [Zoom]: Zoom in/out the displayed image.
	w  [Focus]: Adjust the focus point.
	e  [Auto mode]: Activate the designated auto function of the camera.
	r  Control buttons: Adjust the camera direction.
   Control pad: Panning/tilting speed will be faster if a clicked point  
gets farther from the center point of the control pad.
	t  [Brightness]: Adjust the lens iris (brightness).
	y  [Preset]: Move the camera to the registered preset position.
■  Manual recording
It is possible to record images manually.
[CAM] tab
w
qert
y 
						

							Select the desired camera channel, and 
then click the [PLAY] button. 
→  Playback of recorded images will 
start.
    The 
 indication will be displayed 
in the status display area.
	 •	 Playback	will	resume	from	the	end	 point (time and date) of the last  
playback.
To stop playback, click the [STOP] but-
ton.  
→  The 
 indication will disappear and 
live images from the camera will be 
displayed.
Click the [Go to date] button on the  
playback point operation area.  
→  The "Go to date" window will be dis-
played.
Click the [Control] button, and then click the [Search] button in the 
[Search] box.
	 •	 The	"Select	search	method"	window	will	be	displayed.
Click the [REC event search] button.
	 •	 The	"REC	event	search"	window	will	be	displayed.
Narrow the search by selecting the recording event type.
Designate the time range ("Start" and "End" of "Time & date"), 
"Rec event" and "Camera" to filter the search and then click the 
[OK] button.
	 •	 The	"FILTERING"	indication	will	be	displayed	in	the	status	 
display area, and then the search results will be displayed  
on the list display area.
	 •	 Click	the	[All	list]	button	to	cancel	to	start	searching.
■  Play recorded images
It	is	possible	to	play	recorded	images.
■ Search and play recorded images
It	is	possible	to	search	and	play	recorded	events	(REC	event	search). Select the time and date by clicking the 
[V] button, and then click the [Play] but-
ton.
 
→  Playback of the corresponding 
recorded images will start and the 
 indication will be displayed in the 
status display area.
It	is	possible	to	perform	playback	operation	on	the	[HDD]	tab.
    Each time the button is clicked, the playback speed will change as  
follows.
    (Approx. 4x → 8x → 16x → 32x → 48x → 96x)
 w  [NEXT RECORD]/[PREV RECORD]: Skip to the next or previous 
recorded image and play it.
 e  [NEXT IMAGE]/[PREV IMAGE]: Display the next or previous frame 
when this button is clicked during playback/pausing.
 q  [FF]/[REW]: Perform fast playback or fast reverse playback.[HDD] Tab
Click the time & date of the desired recording event. Playback  
of recorded images corresponding to the selected recording  
event will start.
To stop playback, click the [STOP] button.
Playback point operation area
q
w
e
Nd0811-0       3TU001890BDA       Printed in China