Panasonic Network Disk Recorder Wj Nd300a Installation Guide

31
Set the Network Settings
It is possible to set the network settings. The available settings items are the same as described in the Check the Network
Settings section on the previous page.
It is possible to shift the display by pressing the arrows button (Cand D) while the underscore mark (_) is displayed below the
> indication. 
Shift the display and configure each setting as described below.
The settings of Gateway and HTTP port can be configured when displaying the PT#2 indication (client PC port)....

32
Key Lock Settings
It is possible to lock the buttons on the front panel to make them unusable. 
When the [SET] button is pressed while displaying the key lock display, the message of Keylock Enabled will be displayed
and the buttons on the front panel will be locked. 
The time and date display (standby display) will be displayed soon after the buttons are locked.
[SET]
To release the key lock, press any button on the front panel.
The LCD will display the password box.
Enter the password that has set...

33
Shift the display on the LCD using the arrows button (Cand D).
CArrows buttons D
CArrows buttons D [SET]
[ESC]
CArrows buttons D
CArrows buttons D CArrows buttons D
Important:
When the HDD safety mode is activated, the power of the all HDDs will be off. (Recording and playback will be forcibly
canceled.)
Execute Each Maintenance Function
1. Press the [SET] button after selecting YES on the desired maintenance function display.
The message ACCEPT will be displayed on the LCD when the [SET] button is...

34
Set the HDD Safety Mode
When installing/uninstalling the unit in the rack without turning the power of the unit off, do the following. (Steps 1, 3 and 4.)
1. Turn off the power of the HDDs.
Press the [SET] button after selecting YES when the ACCEPT indication is displayed (page 32).
When the [SET] button is pressed, the Wait for 30 sec indication will be displayed.
When the power of the HDD is turned off (it will take for around 30 seconds), the REBOOT/PANEL OFF indication will be
displayed....

Check the Unit Number of the Extension Unit
The unit number of the connected extension unit can be checked with the HDD access indicators on the extension unit.
1. Select YES when the EXT Number Check indication (page 33) is displayed on the LCD, and then press the [SET]
button. 
The message Wait for 30 sec will be displayed. When the unit completed to turning off the power of the HDDs (it will take
around 30 seconds), the EXT Unit:1 will be displayed.
2. Check the unit number of the extension unit.
When...

36
Reboot the Unit Manually
It is possible to reboot the unit manually as follow.
Press the [SET] button while displaying the [REBOOT] display.
The message ACCEPT will be displayed.
When the [SET] button is pressed after moving the underscore mark below YES using the arrows button (Aor B), the unit will
reboot.
[SET] 

37
•The fan is not functioning because of the malfunction.
Refer to the dealer.
Troubleshooting
Check the following before requesting repair 
Contact a dealer if a problem cannot be solved even after checking and trying the solution or if a problem is not described
below, or when having a problem with installations. 
•Check if the power plug is properly connected to the AC
outlet. 
•Check if the power cord is properly inserted into the power
socket of the unit.
•Check if alarm input signals are properly...

38
Inspect the power cord, power plug and connectors periodically. 
•The power cord, plug and connectors are worn out. This may result in electric
shock or a fire. Unplug the power plug from the AC outlet immediately, and
refer to qualified service personnel. 
The power cord insulation is
damaged.
The power cord, plug and con-
nectors get hot during use. 
The power cord gets hot when
bent or stretched.
Check item/RemedyProblem
ProblemCheck item/Remedy
The HDD access indicator
lights red and orange.
•The...

39
Standard Accessories
CD-ROM*   ............................................................................................................ 1 pc.
Installation Guide (this manual) ............................................................................ 1 pc.
The following are for installation: 
Power Cord (NTSC model) ................................................................................ 1 pc.
Power Cord (PAL model)...

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local...