Panasonic Network Camera Server BB HCS301A Installation Manual

							Installation
Network Camera Server
Model No.BB-HCS301A
 Panasonic System Networks Co., Ltd. 2005
PSQX3858XA
 KK0605YT4120
No responsibility will be taken by our company with respect to consequences
resulting from the use, damage or both of this product.
Trademarks
  Microsoft and Windows are either registered trademarks or trademarks 
of Microsoft Corporation in the United States and/or other countries.
  Pentium is a trademark or registered trademark of Intel Corporation or 
its subsidiaries in the United States and other countries.
  SD mark is a trademark of the SD Card Association.
  All other trademarks identified herein are the property of their respective 
owners.
  This software is based in part on the work of the Independent JPEG 
Group.
Abbreviations
  UPnP is the abbreviation for Universal Plug and Play.
  Network Camera or Analog Camera connected to this product is 
called Camera in this Installation manual.
 Installation (This manual)
This manual provides explanations for items included with this product.
 Getting Started
Getting Started provides explanations for the initial configuration.  
The Getting Started helps you to easily configure this product.
 Operating Instructions (Included on the Setup CD-ROM)
Operating Instructions explains about operations, settings and features  
when using this product.
 Troubleshooting (Included on the Setup CD-ROM)
Troubleshooting provides explanations for troubleshooting tips.
How to Use This Documentation
This product includes the following 4 manual types.
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.
Environment:
Do not install this product where the temperature is less than 0 C (+32 F) or greater than +40 C (+104 F). Allow 10 cm (4 inches) clearance around 
the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the AC adaptor cord from the outlet.
If you have any problems:
Consult an authorized Panasonic Factory Service Center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.
Please read this manual before using and save this manual for future 
reference.
Panasonic Website: http://panasonic.net/pcc/ipcam/
Audio and Video Recording Notice:
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in 
compliance with all applicable federal, state and local statutes.IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be 
followed to reduce the risk of fire, electric shock, or personal injury.
SAVE THESE  INSTRUCTIONS 1.  Read and understand all instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not block any ventilation openings. Install in accordance with the 
manufacturers instructions.
6.  Do not install near any heat sources such as radiators, heat registers, 
stoves, or other devices (including amplifiers) that produce heat.
7.  Protect the AC adaptor cord and AC cord from being walked on or 
pinched particularly at plugs, convenience receptacles, and the point 
where they exit from the unit.
8.  The AC cord is used as the main disconnect device, ensure that the 
socket-outlet is located/installed near the equipment and is easily 
accessible.
9.  Do not touch the unit or the AC adaptor cord and AC cord during 
lightning storms.
10. Unplug the unit when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required 
when the unit has been damaged in any way, such as when the AC 
adaptor, AC cord or plug is damaged, the unit does not operate 
normally, or after the unit has been dropped.
12. Unplug this unit from power outlets if it emits smoke, an abnormal 
smell or makes unusual noise. These conditions can cause fire or 
electric shock. Confirm that smoke has stopped and contact an 
authorized service center.
13. Keep the SD memory card (customer-provided) out of reach of children 
to prevent swallowing.
CR Coin Cell Lithium Battery Information:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. 
						

							Your PC (Personal Computer) and network must meet the following 
technical specifications for this product to work properly.
Item Description
Operating
SystemMicrosoft
® Windows® XP, Microsoft® Windows® 2000 
Microsoft® Windows® Me, Microsoft® Windows® 98SE
 For viewing single camera
Pentium
® III (800 MHz or greater is recommended.)
 For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.) CPU
ProtocolTCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100 Mbps network card installed
Web BrowserInternet Explorer 6.0 or later 
(Not included on the Setup CD-ROM)
Audio input/output feature (Microphone, speaker etc.) Interface
Audio
Item Description
Operating
SystemMicrosoft
® Windows® XP Service Pack 1 or later
 For viewing single camera
Pentium III (800 MHz or greater is recommended.)
 For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.) CPU
ProtocolTCP/IP protocol 
(HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
10/100 Mbps network card installed
Web BrowserInternet Explorer 6.0 or later 
(Not included on the Setup CD-ROM)
Audio input/output feature (Microphone, speaker etc.) Interface
Audio
For IPv6 Connection
Main Unit . . . . . . . . . . . . . . . . . . . . 1  p c .
AC Adaptor. . . . . . . . . . . . . . . . 1  p c .
Order No.: PQLV202Y
(Cord Length: About 3 m 
                       [9 feet 10 inches])
AC Cord  . . . . . . . . . . . . . . . . . . . . . 1  p c .
Order No.: PSJA1069Z
(Cord Length: About 1.8 m 
                       [5 feet 11 inches])
Setup CD-ROM   . . . . . . . . . .  . .  1  p c .
Order No.: PNQC1050Z
Installation
(This manual) . . . . . . . . . . . . . . . .  1  p c .
Getting Started  . . . . . . . . . . . . . .   1  p c .
The following items are provided with this product. 
Additional pieces can be ordered by calling 1-800-332-5368.
System Requirements for your PC
For IPv4 Connection
What is IPv6?
  IPv6 is short for Internet Protocol Version 6.
  IPv6 was created to address the additional IP addresses that will be 
needed as the Internet continues to expand.
  IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a 
number of years during a transition period.
  Though most ISPs (Internet Service Providers) do not yet support IPv6, 
many local networks already use it. When your ISP supports IPv6, your 
Panasonic will be ready!
 Panasonic Servicenters are listed in the servicenter directory.
 Call 1-800-272-7033 for the location of an authorized servicenter.
 This Network Camera Server is designed for use in the United States of 
America. Sale or use of this product in other countries/areas may violate 
local laws.
 Carefully pack your unit, preferably in the original carton.
 Attach a letter, detailing the symptom, to the outside of the carton.
 Send the unit to an authorized servicenter, prepaid and adequately 
insured.
  Do not send your unit to the Panasonic Corporation of North America 
listed left or to executive or regional sales offices. These locations do 
not repair consumer products.
Security Cautions
Included Items
Symptom
When you ship the product
For product serviceThe information in this document is subject to change without notice.
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., 
and may be reproduced for internal use only. All other reproduction, in 
whole or in part, is prohibited without the written consent of 
Panasonic System Networks Co., Ltd.
The use of a unique User Name and secret Password is an important 
tool that will help limit unauthorized individuals from accessing this 
product. If you choose to disable this tool, and choose not to limit 
access by use of a User Name and Password, this may result in 
access to this product by unauthorized individuals. (See page 74 of 
the Operating Instructions on the Setup CD-ROM)
User Name and Password Protection
Note
See Panasonic support website at 
http://panasonic.net/pcc/support/netwkcam/ for details about network 
environment.
Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094
When using this product, take appropriate measures to avoid the following 
security breaches.
  Leaks of private information via this product
  Illegal use of this product by a third party
  Interference or suspension of the use of this product by a third party
  Using this product in such a way as to violate the rights of any third party 
or otherwise use in violation of law
Take the following measures to avoid security breaches:
  To prevent illegal access, keep the update firmware  
(If you do not have the latest version of firmware, this can lead to blocked 
access or information leaks).
  You are responsible for the security settings, such as user name and 
password, to access this product. This information should not be made 
available to any third parties outside the user group.
  You are responsible for this products user information, such as videos, 
still images and internet contents etc. This information should not be 
made available to any third parties outside the user group.
  When sending this product to be repaired with a company not related to 
Panasonic, make back-up copies of files, if necessary, and reset this 
product to factory default.
  When transferring this product to another party, make back-up copies of 
files, if necessary, and reset this product to factory default.
  When disposing of this product, reset this product to factory default, or 
erase information by means of electrical deletion or physical 
dismantlement.
  Recorded files stored on the SD memory card can lead to private 
information leaks. When sending this product to be repaired or transferring 
it to another party, ensure that the SD memory card is removed.
  After the camera is accessed by the administrator, make sure to close the 
browser for added security.
  Change the administrator password periodically for added security.