Panasonic Network Camera Recorder With Viewer Software BB-HNP15A Operating Instructions

Operating Instructions
161
PreferencesMulti- 
MonitoringSet the transparency level-
Transparency 50%
Focus and selected frame 
width3
Focus frame colorRed
Selected frame colorBlue
Text colorBlack
Display the camera name-
Display the frame rate-
Specify the frame rate2 frames/1 second
Adjust the monitoring 
refresh rate when the CPU 
is highly loadedWhen the CPU is 
loaded more than 80 %, 
the refresh rate is 
paused for 15 seconds.
Multi- 
PlaybackPlayback Screen Layout2 x 2
Playback position display...

Operating Instructions
162
PreferencesRecorded 
ImagesRecording mode colors for 
graphics on the Recorded 
Images, Multi-Playback, 
and Timer List Pages
Normal RecordingLight Green 
(RGB(0.255.0))
Motion Detection 
RecordingYe l l o w  
(RGB(255.255.0))
Alarm/Sensor RecordingRed (RGB(255.0.0))
Playback OptionsPlay automatically
Playing ListAll
NavigationDisplay unitRecorded Time [h]
Operation 
SupportExecute Restore Program-
Restoration Target FolderDestination Folder
Delete all images from the 
deleted...

Operating Instructions
163
SettingsCamera 
SettingsEnable/DisableEnable
Camera NameNew Camera
Comment-
Camera Addresshttp://
Po r t80
User Name-
Password-
Use a proxy server-
Monitoring-
Destination FolderInstall folder
crdata
Image 
SettingsData FormatJPEG
Resolution320 x 240
Image QualityStandard
Recorded FrequencyNot Specify
Audio Recording SettingsImage Only
Calculated disk capacity to 
record30 days of recording 
will require
Recording imagesDisplay the error 
message
Recording 
Capacity 
LimitLimit...

Operating Instructions
164
SettingsMotion 
DetectionMotion is not detected 
during the pan, tilt or zoom 
operation of the camera.Motion is not detected.
Motion Detection Analysis 
Frequency0.50 seconds
Sensor deactivation time-
Threshold to Start 
Recording
slightly low
Cell SensitivityCenter
Before detected/ 
After detected
After detected: Record 
images for 5 seconds.
Executing Commands for 
Detection-
Alarm/
SensorSet the Alarm1/Sensor 
R
ecording
-
Alarm enable conditionStatus : Open (High)
Before...

Operating Instructions
165
SettingsKeywordKeyword1-
Keyword2-
Timer listDisplay 10 timer 
simultaneously -
Timer 
SettingsEnable/DisableEnable
Timer NameNew Timer
Timer ScheduleDaily, From 00:00 to 
Right Before 00:00
Recording MethodRecord images during 
all the set time period
Before detected/ 
After detected
After detected:Record 
images for 5 seconds
Executing Commands for 
Detection-
Sensor deactivation time-
Keyword1-
Keyword2-
Exporting/
ImportingExportDestination folderInstall folder
File name-...

Operating Instructions
166
WindowMulti- 
MonitoringFocusupper left
Multi- 
PlaybackFocusupper left
Recorded 
imagesSearched TargetDestination Folder
Time Period Setting-
Time Periodfrom 00:00:00 to Right 
before 00:00:00
Weekly SettingMon, Tue, Wed, Thu, 
Fr i, Sat, Sun
Recording ModeNormal Recording, 
Motion Detection 
Recording, Alarm/
Sensor Recording
Recording TriggerTimer Recording, 
Manual Recording
Keyword-
Display timelines as chart
Time Unit1 hour
Display scaleDisplay in 24-h mode
CalenderTodays...

Operating Instructions
167
Remote AccessSettingsUse Remote Access 
Connection-
Server Settings-
Po r t10082
Admin User Name-
Admin Password-
User Name-
User Password-
Items Default 

Operating Instructions
168 

Panasonic Corporation of North AmericaPQQX15750WA
    KK0507HK4010
Panasonic System Networks Co., Ltd. 2007
Carefully pack your unit, preferably in the original carton.
Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
Operating Instructions is subject to change without notice.
Send the unit to an authorized servicenter, prepaid and adequately insured.
Do not send your unit to the Panasonic Corporation of North America listed below or to
executive or regional sales offices....