Panasonic Network Camera Recorder With Viewer Software BB-HNP15A Operating Instructions

Operating Instructions
101
2.7.2 Copying the Recorded Images
You can extract recorded images for a specific time frame and create a new 
recording file.
1.Select the image that you want to copy in [Playback list].
 See page 92 for how to display recorded images in [Playback list].
2.Select [Make Copy] from the editing menu and click [Execute].
3.Specify the start and end time of the images to extract.
4.Click [OK].
 The copy operation is started.  

Operating Instructions
102
 When copy operation is completed successfully, the following window is displayed.
Note
If copying is canceled, images that were copied before the cancellation are 
saved. 

Operating Instructions
103
2.7.3 Deleting the Recorded Images
You can delete recorded images on [Playback Screen].
1.Select the image that you want to delete in [Playback list].
 See page 92 for how to display recorded images in [Playback list].
2.Deleting the displayed image 
Select [Delete] from the editing menu and click [Execute].
Delete all recorded images that are checked in the playback list  
Select [Delete all checks] from the editing menu and click [Execute].
3.Click [OK] on the confirmation...

Operating Instructions
104
2.7.4 Changing the Keyword of the Recorded Images
You can change the keyword set to the recorded images.
1.Select the image that you want to  change the keyword in [Playback list].
 See page 92 for how to display recorded images in [Playback list].
2.Select [Change Keyword] from the editing menu and click [Execute].
3.Changing the keyword.
4.Click [OK].
 The keyword is changed.
Note
You can also change the keyword on the multi-playback page by right-clicking 
on the playback...

Operating Instructions
105
2.7.5 Copying Display Screens
[Copy to the Clipboard]
Copy image displayed in the playback page to the Clipboard.
1.Select the image that you want to copy in [Playback List].
 See page 92 for how to display recorded images in [Playback list].
2.Select [Copy To The Clipboard] from the editing menu and click [Execute].
 Copy image displayed in the playback page to the Clipboard.
[Take a Snapshot]
Take a snapshot of image displayed in the playback page.
1.Select the image that...

Operating Instructions
106
3.On the snapshot page, click [Save].
 The save as window is displayed.
4.Select the destination folder, enter a file name and click [Save].
Note
 Clicking [Copy To The Clipboard] copies image to the Clipboard.
 The clipboard is a place to temporarily save in copying or pasting data. 
The copied image can be used in the program such as Paint. 

Operating Instructions
107
2.7.6 Displaying the Recorded Image Information
You can display information about a recorded image.
1.Select the image whose information you want to display in [Playback List].
 See page 92 for how to display recorded images in [Playback list].
2.Select [Recorded Image Information] from the editing menu and click 
[Execute].
 Displaying Recorded Image Information. 

Operating Instructions
108
2.8 Use Remote Access Functions
Using the recording software on a separate PC, you can view the recorded images 
from a Panasonic Network Camera connected to a PC (remote server) registered 
with the recording software.
 To use remote access functions, you must install the recording software on the 
remote server and remote clients. You must have enough licenses for the 
remote server and remote clients.
 Only one remote client can be connected to a remote server at a time....

Operating Instructions
109
The following chart illustrates the configuration procedure.
Note
To use as a remote server, you must assign an IP address or domain name in order 
to connect to this software. An IP address can be obtained from your provider. A 
domain name can be obtained by registering with the Panasonic Viewnetcam.com 
service.
If you have already registered with P anasonic Viewnetcam.com, use the domain 
name obtained when you registered. For details about Viewnetcam.com, see the...

Operating Instructions
11 0
2.8.1 Configuring the Settings
To use remote access functions, you mu st install the recording software on the 
remote server and remote clients.
Before you can use remote access functions, you must install the recording 
software on your PC.
Note
 You must register one license for each  remote server and remote client PC.
 If you do not use remote access functions, this software install on the remote 
server and remote client can use the software as a normal recording...