Panasonic Network Camera Recorder Operating Instructions

							Operating Instructions
81
Search
Message Cause and Remedy
Parameter Error
A XXXX error has occurred in 
Preferences. Try again.
XXXX =
 Save Destination Folder
 Save Destination Free Disk 
Space
 Perform Automatic Backup
 Backup Folder
 Backup Destination Free Disk 
Space
 Backup Execution Time
 Backup Period
 Backup Day of the Week
 Backup Date
 Using a Proxy Server
 Proxy Server Address
 Proxy Server Address Port
 Proxy User Name
 Proxy Password This is a software error.
If same error message appears after trying 
again, restart your PC.
Message Cause and Remedy
Search Keyword should be 40 
characters or less. If Search Keyword was more than 40 
characters.
Follow the instruction message.
Set the Start Date and Time so 
that it comes before the End Date 
and Time. If Start Date and Time comes after the End 
Date and Time.
Follow the instruction message. 
						

							Operating Instructions
82
Keyword Change
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Search 
Recorded Image List. Try again.
XXXX =
 Camera ID
 Number of Search Results
 Search Start Number
 Search Topic
 Recording Status
 Recording Type
 Start Date and Time
 End Date and Time
 Day Specification
Keyword
 Folder Specification This is a software error.
If same error message appears after trying 
again, restart your PC. 
Message Cause and Remedy
Keyword 1 should be 40 
characters or less. Keyword 1 was more than 40 characters.
Follow the instruction message.
Keyword 2 should be 40 
characters or less. Keyword 2 was more than 40 characters.
Follow the instruction message. 
						

							Operating Instructions
83
License Registration
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Edit 
Keyword. Try again.
XXXX =
 Camera ID
 Recorded Image ID
 Recorded Image Save 
Destination
Keyword 1
Keyword 2 This is a software error.
If same error message appears after trying 
again, restart your PC.
Message Cause and Remedy
Enter Registration Code.  Registration Code space was blank.
Follow the instruction message.
Enter License Key.  License Key space was blank.
Follow the instruction message.
An error has occurred in the 
XXXX parameter in License 
Registration. Try again.
XXXX =
 Registration Code
 License Key This is a software error.
If same error message appears after trying 
again, restart your PC.  
						

							Operating Instructions
84
JPEG Conversion
Message Cause and Remedy
Start Time should be within the 
recording time. The start time is not within the recording time.
Follow the instruction message.
Set the Start Time so that it 
comes before the End Time. The start time comes after the end time.
Follow the instruction message.
Set the End Time to within the 
recording time. The end time is not within the recording time.
Follow the instruction message.
Conversion Interval should be 
between 1 and (the number of 
images - 1). The frequency is not between 1 and (end time 
- start time [seconds]), or the space was blank.
Follow the instruction message.
Conversion Interval should be 
between 1 and (end time - start 
time [seconds]). The number is larger than the time period 
between the start time and end time.
Follow the instruction message.
Conversion Interval should be 
between 1 and 3600. The image is recorded for more than 1 hour, 
but the converted interval is not between 1 and 
3600.
Follow the instruction message.
The conversion file is possibly 
being used in another application. 
Confirm that it is not being used 
and try again. The converted file has been opened in 
another application.
Close other applications and try again.
The recorded images could not be 
found. Refresh the Recorded 
Image List and try again. There is no recorded images.
Refresh the recorded images and try 
again.
A write error has occurred.  An error has occurred in JPEG conversion. 
						

							Operating Instructions
85
Other Errors
Message Cause and Remedy
Recording cannot be started 
because XXXX has reached its 
recording capacity. Delete 
unnecessary images in order to 
start recording.
XXXX =
 Camera Name The capacity has reached the recording 
capacity limit.
Delete unnecessary images, or change 
the settings of recording capacity limit.
Recording cannot be started 
because XXXX has disabled the 
camera. Enable the camera in 
order to start recording.
XXXX =
 Camera Name The camera is disabled. (The disabled camera 
cannot be recorded.)
Follow the instruction message.
Software Startup failed.
Restart this software.
If situation does not improve after 
restarting the software, restart 
your PC. This software fails to start the ncrcore.exe file.
Restart your PC.
An internal communication error 
has occurred. Restart this 
software.
If situation does not improve after 
restarting the software, restart 
your PC. The ncrcore.exe file is not started, or this 
software cannot open the ncrcore.exe file.
Restart your PC.
If camera is disabled, the 
connection is broken and the timer 
and recording functions are also 
disabled.
Is it OK to disable all the selected 
camera? The camera is disabled.
Follow the instruction message.
Connection to the camera cannot 
be confirmed.
The Address, Port Number or 
Proxy settings may be incorrect. 
Are you sure you want to save? The camera cannot be accessed.
Follow the instruction message. 
						

							Operating Instructions
86
Camera could not be 
authenticated. Check the User 
Name and Password and try 
again. This software do not pass the camera 
authentication.
Follow the instruction message.
The specified camera does not 
support audio. Change the 
recording settings to image only. The camera is not supporting audio, but the 
image setting is set to audio and image.
Follow the instruction message.
There is insufficient free space on 
the Save Destination Disk. Delete 
unnecessary recorded images 
and try again. The destination free disk space is insufficient.
Reduce the destination free disk capacity, 
or change the destination.
Is it OK to delete all the selected 
recorded images? The recorded images are deleted.
Follow the instruction message.
Recorded images in use cannot be 
deleted. Stop the recording and try 
again. You are deleting images during recording.
Follow the instruction message.
The recorded images could not be 
found. Refresh the Recorded 
Image List and try again. You manually deleted recorded images.
Follow the instruction message.
There were recorded images that 
could not be deleted. Try again. The file has been opened in another 
application
Close other applications and try again.
There were timers that could not 
be enabled. Try again. This software is malfunctioning. (This 
message is not normally displayed.)
Restart your PC.
There were timers that could not 
disabled. Try again. This software is malfunctioning. (This 
message is not normally displayed.)
Restart your PC.
Is it OK to delete all the selected 
timers? The timer is deleted.
Follow the instruction message. Message Cause and Remedy 
						

							Operating Instructions
87
There were timers that could not 
be deleted. Try again. This software is malfunctioning. (This 
message is not normally displayed.)
Restart your PC.
Is it OK to apply the proxy settings 
to all cameras? You checked [Use a proxy server] on the 
network page of the preferences. (The camera 
should be registered.)
Follow the instruction message.
All cameras have been set to use 
proxy settings. You clicked [Yes] in the Is it OK to apply the 
proxy settings to all of the cameras? 
message, and the saving is complete.
Follow the instruction message.
Applying proxy settings to all 
cameras has failed. Apply 
individually. You clicked [Yes] in the Is it OK to apply the 
proxy settings to all of the cameras? 
message, but the saving is failed.
Check the [Use Proxy Server] box for each 
camera on the registration information 
change or basic settings page.
XXXX error occurred during 
importing.
XXXX =
 File Type
 File Size
 Memory Shortage
 Open This software cannot import from the file at 
[Tools] [Import Camera Settings].
The file is broken.
The number of registered cameras 
reached the maximum of XXX 
cameras, so importing was 
canceled.
XXX =
64 The registered cameras has reached the 
maximum limit during import.
Delete unnecessary cameras.
Exporting failed.  This software cannot export to the file at 
[Tools] [Export Camera Settings].
The file is broken.
License registration is complete. License registration is complete. Message Cause and Remedy 
						

							Operating Instructions
88
The registration information was 
incorrect. Check the registration 
code and license key and try 
again. The registration information was incorrect.
Check the registration code and license 
key and try again.
To use this feature, license 
registration is essential. Perform 
license registration. Some features cannot be used without license 
registration (JPEG Conversion).
Perform license registration.
The file could not be found.  The Operating Instructions file is not in 
software folders. (The file may be manually 
deleted.)
Install this software again.
PDF related applications could not 
be found. Install Adobe Reader. Install Adobe Reader and try again.
Connection with the proxy server 
could not be confirmed. The 
Address or Port Number settings 
may be incorrect. Are you sure you 
want to save? The proxy server cannot be accessed.
Check the address and port number of the 
proxy server.
Proxy server could not be 
authenticated. Check the User 
Name and Password, and try 
again. This software does not pass the proxy 
authentication.
Check the user name and password of the 
proxy server.
The web browser could not be 
started. Start the web browser and 
access the following URL. Web browser could not be started (Download, 
support information and camera portal site).
Install the web browser (Internet Explorer 
6.0 or later).
Network Drive could not be 
specified in the Save Destination 
Folder. Specify a local drive. Network drives or folders on the network could 
not be specified as the save destination folder.
Specify a local drive.
Network Drive could not be 
specified in the Backup Folder. 
Specify a local drive. Network drives or folders on the network could 
not be specified as the backup destination 
folder.
Specify a local drive. Message Cause and Remedy 
						

							Operating Instructions
89
Network Drive could not be 
specified in the Import File. 
Specify a local drive. Network drives or folders on the network could 
not be specified to create an export file.
Specify a local drive.
Network Drive could not be 
specified in the Export File. 
Specify a local drive. Network drives or folders on the network could 
not be specified to create an export file.
Specify a local drive.
Save Destination Free Disk 
Space should be less than the 
current free space (XXX MB). The disk free capacity set on the preferences 
page is larger than the actual capacity.
Set the disk free capacity smaller than the 
actual capacity.
Backup Destination Free Disk 
Space should be less than the 
current free space (XXX MB). The backup disk free capacity set on the 
preferences page is larger than the actual 
capacity.
Set the disk free capacity smaller than the 
actual capacity.
XXXX cannot be accessed.
XXXX =
 Save Destination Folder
 Backup Folder
 JPEG Conversion Folder
 Import File
Export File The folder or file cannot be accessed because 
the drive cannot be found or the path is not 
available.
Properly select a folder of file.
If Set to Default is checked, 
settings are returned to the state in 
Create New Camera. The default 
registration information does not 
change. You checked [Set to Default] on the create new 
camera page, or image, recording capacity 
limit or motion detection recording settings on 
the camera registration information page.
Follow the instruction message.
If Set to Default is checked, 
settings are returned to the state in 
Create New Timer. The default 
registration information does not 
change. You checked [Set to Default] on the create new 
timer page, or basic setting on the timer 
registration information page.
Follow the instruction message. Message Cause and Remedy 
						

							Operating Instructions
90
There is only XX MB of free space 
remaining in Save Destination 
Folder Disk. Either increase the 
free space to over 100 MB or 
select a disk with over 100 MB of 
free space. The save destination free space is less than 
100 MB.
Follow the instruction message
There is only XX MB of free space 
remaining in Backup Folder Disk. 
Either increase the free space to 
over 100 MB or select a disk with 
over 100 MB of free space. The backup destination free space is less than 
100 MB.
Follow the instruction message.
An error has occurred in the 
XXXX parameter in Disable 
Camera. Try again.
XXXX =
 Camera ID
 Disable FlagIf same error message appears after trying 
again, restart your PC. 
An error has occurred in the 
XXXX parameter in Delete 
Camera. Try again.
XXXX =
 Camera IDIf same error message appears after trying 
again, restart your PC. 
An error has occurred in the 
XXXX parameter in Manual 
Recording ON. Try again.
XXXX =
 Camera ID
 Recording modeIf same error message appears after trying 
again, restart your PC. 
An error has occurred in the 
XXXX parameter in Manual 
Recording OFF. Try again.
XXXX =
 Camera IDIf same error message appears after trying 
again, restart your PC. Message Cause and Remedy