Panasonic Network Camera Recorder Operating Instructions

Operating Instructions
21
1.7 Performing License Registration
If the license is not registered, the License Registration window is displayed. 
Click [Issue a license key on online registration] to register a license.
Follow the steps below to register a license.
1.7.1 Registering a New License
1.Display the License Registration window.
 If the license is not registered, the License Registration window is 
displayed.
 You can also display the window by selecting [Help] [License 
Registration].
2.Enter...

Operating Instructions
22
3.Click [OK].
Note
If the following window is displayed, the registration code or license key is 
incorrect. Confirm them, and enter them again.
Note
If the registration is complete, [License Registration] on the menu bar is grayed 
out.
Note
The registration code and license key cannot be reissued even if they are lost. 
Please keep them secure. 

Operating Instructions
23
2 Software Operation
2.1 Selecting a Folder to Save Images
This software records camera images to the hard disk on your PC. The folder can 
be changed. After the camera is registered, destination folders are automatically 
created in the selected folder. The recorded images are saved in the destination 
folders.
 If the destination folder is not selected, the recorded images are saved into the 
destination folders at the destination folder where Network Camera Recorder 
is...

Operating Instructions
24
1.Start this software and select [Tools] [Preferences] [Destination Folder] on 
the menu bar.
 The destination folder page is displayed. 

Operating Instructions
25
2.Click [Browse...].
 The selecting folder page is displayed.
3.Select the destination, and click [OK] .
 Create the folder in advance.
4.Set the hard disk free space.
 Set enough capacity (100 MB or greater) as your destination folder to 
prevent the system from getting unstable.
5.Click [OK].
Notes
 Recorded images are saved in the following folder.
 If the image cannot be recorded, error message is displayed.
Do not manually delete, move or change any files in the index...

Operating Instructions
26
2.2 Automatically Backing up Recorded Images
Recorded images can be backed up automatically at the specified time.
1.Select [Tools] [Preferences] [Backup] on the menu bar.
 The backup setting page is displayed.
2.Set the parameters, and click [OK].
(a)
(b)
(c) Check the box. 

Operating Instructions
27
Parameters
Notes
 Backup feature automatically creates the last dated folder, and copies the 
recorded images and data for search in the destination folder. 
 Backup feature backs up only newly-recorded images after the last 
backup was executed.
 If the capacity has reached the limit, the backup is stopped, and error 
message is displayed (see page 91).
 The backup images can be searched. Select [Backup Image] on the 
search page (see page 63).
 The recording operation of...

Operating Instructions
28
2.3 Using a Proxy Server
You need to set the following settings to monitor the camera on the Internet you 
using a proxy server. (You cannot connect to the camera without the proxy 
settings.)
If you do not use a proxy server, this setting is not required.
1.Select [Tools] [Preferences] [Network Connection] on the menu bar.
 The proxy setting page is displayed.
2.Check [Use a proxy server], set the parameters, and click [OK]. 

Operating Instructions
29
Setting Description
Proxy Address and 
Po r tEnter the IP address of proxy server and port number. Enter 
them after asking your administrator.
 Enter the alphanumeric characters. (Enter only the 
numeric character for port number.)
Proxy User Name 
and Proxy 
PasswordEnter the user name and password for the proxy server, if 
required. Enter them after asking your administrator.
 Enter the alphanumeric characters. 

Operating Instructions
30
2.4 Registering the Camera
Before you can view or record images, each camera must be configured on this 
software.
 If you change the destination folder from the default folder of this software, 
select a folder to save images in advance (see page 23).
 The camera information can be imported and exported (see page 72).
2.4.1 Creating New Camera
1.Select [Camera] [Create New Camera] on the menu bar.
 You can create a camera on the menu displayed by right-clicking on the...