Panasonic Network Camera Recorder BB-HNP60 Operating Instructions

Operating Instructions
41
2.3 Network Camera Monitoring
2.3.1 Using the Operation Bar
Pan/Tilt Scan buttons*1 Pan/Tilt Scan buttons move the lens 
horizontally (left and right) or vertically (up and down) all over and 
the lens returns to the current position.
Pan/Tilt/Home Position buttons
*1 (Only the Network Camera 
with Pan/Tilt feature): Operates the direction of Network Camera. 
Preset buttons
*1 (  page 42) 
Zoom buttons
*1*2 (  page 43) 
Focus buttons
*1*2 (  page 43) 
Brightness: Brightness...

Operating Instructions
42
2.3.2 Using Preset Buttons
The preset buttons set in Network Camera can be used. Press a preset button on 
the operation bar to view the preset position at the center of the image field. Preset 
buttons allow you to move the lens to the positions set in Network Camera. Right-
click a preset button and click [refresh] to gain its latest setting.
Notes
 A set-up preset button is displayed in blue.
 Gray preset buttons has not been set in Network Camera.
 When a preset or home...

Operating Instructions
43
2.3.3 Zooming and Focusing
Zooming in and out (Only for Network Camera 
with zooming and focusing feature) 
Zoom buttons increases or decreases the size 
of the object. Tele button zooms in (maximum 
21x), and Wide button zooms out. Clicking the 
buttons allows you to zoom in or out the image 
by 10 steps.
Automatic and Manual Focusing 
(Only for Network Camera with zooming and 
focusing feature) 
Focus buttons adjust the focus. Network 
Camera has Automatic and Manual focusing...

Operating Instructions
44
2.3.4 Monitoring the Network Camera
1.
Click Camera Preview in the Camera List to select a Network Camera.
2.Click .
 Start monitoring Network Cameras.
3.Click   to quit.
 Stop monitoring Network Cameras.
Notes
 Camera Preview size in the Camera List can be changed. (  page 32)
 When you select several Network Cameras, click Camera Previews while 
pressing a [Ctrl] key or a [Shift] key.
 When you monitor several Network Cameras, select several Network 
Cameras and select...

Operating Instructions
45
2.3.5 Using Camera Bar
The Camera Bar displays images of all active Network Cameras that are 
configured. This feature allows you to view multiple images simultaneously. You 
can monitor Network Camera on the Camera Bar though you minimize Network 
Camera Recorder even if another application is in use.
Setting Network Camera on the Camera Bar
1.Click [CamBar].
 Camera Bar appears.
2.Drag Camera Preview in the Camera List to the Camera Bar.
 Repeat Step 2 when you set other...

Operating Instructions
46
Deleting Network Camera on the Camera Bar
Deleting selected Network Cameras
1.Right-click the image of Network Camera to delete on the Camera Bar and 
select [Delete from Cambar].
 Camera Bar deletes the selected Network Camera.
Deleting all Network Cameras
1.Click the Camera Bar Icon on the upper left corner on the Camera Bar.
 Camera Bar deletes all Network Cameras.
(1) Right-click the image.
(2) Select [Delete from Cambar].
(2) Select [Delete All Cameras from Cambar].
(1)...

Operating Instructions
47
Commands on the Camera Bar
Commands for selected Network Camera
Right-click the image of Network Camera.
Commands for all Network Cameras
Click the Camera Bar Icon on the upper left corner on the Camera Bar.
Deletes the selected Network
Camera from Camera Bar.
Copies the image of Network
Camera to the Clipboard.Network Camera Recorder 
keeps Network Camera 
information.
Starts or stops monitoring, 
or edits the parameters on 
Edit Camera window.•
Deletes the selected Network...

Operating Instructions
48
2.4 Network Camera Recording
2.4.1 Setting the Hard Disk Capacity
A maximum hard disk capacity for recording can be set.
1.Select [File]  [Preferences] on the menu bar.
 Preferences window appears.
2.Set the lowest hard disk capacity to stop Network Camera Recorder.
 We recommend you to set 500 MB or greater to prevent the PC from going 
down.
 Confirm that Stop cameras if disk space low check box is checked.
3.Click [OK].
 The dialog box appears.
4.Click [OK] and close the...

Operating Instructions
49
2.4.2 Backing up the Recorded Image
Recorded images can be backed up automatically at a specified time.
Notes
 When setting Automatic Backup, it is recommended to select a new folder 
to save recorded images. Because all data in a specified folder is copied.
 When setting Automatic Backup, Network Camera Recorder keeps on 
backing up images beyond the set-up hard disk capacity. Check the 
destination folder periodically. When the hard disk capacity is getting low, 
reduce the...

Operating Instructions
50
2.4.3 Recording the Network Camera
Network Camera Recorder records the images of Network Cameras.
1.Click Camera Preview in the Camera List to select Network Camera.
 The frame of the selected Camera Preview turns blue.
2.Click   to start monitoring Network Cameras.
3.Click [On] of Recording buttons.
 Camera Name will be red.
Click [Off] of Recording buttons to quit.
Notes
 The number of JPEG files saved in a folder should be less than 10,000. 
Network Camera Recorder gets...