Panasonic Network Camera Management System Installation Guide

Network Camera Management System
Installation/Troubleshooting
Version 1.1
Model No.  BB-HGW700A
1 Before Using ........................................................... 3
1.1 Important Safety Instructions ............................................... 3
1.1.1 FCC and Other Information ............................................................. 4
1.1.2 Security Cautions ............................................................................ 6
1.1.3 Open Source Software...

Installation/Troubleshooting
2
Introduction
How to Use This Documentation
This product includes the following two manual types.
•Installation/Troubleshooting (this manual)
Installation/Troubleshooting provides an explanation of included accessories, a guide to initial 
setup and troubleshooting tips.
Operating Instructions (included on the CD-ROM)
Operating Instructions provides a detailed explanation of the operations, settings and functions of 
this product.
Abbreviations
 UPnP is the abbreviation...

3 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
1 Before Using
1.1 Important Safety Instructions
When using this product, basic safety precautions should always be followed to reduce the risk of fire, 
electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not install this product near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including...

Installation/Troubleshooting
4
1.1.1 FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio...

5 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
Responsible Party: Panasonic Corporation of North America 
One Panasonic Way 
Secaucus, NJ 07094 
Tel No: 1-800-211-PANA (7262)
No responsibility will be...

Installation/Troubleshooting
6
1.1.2 Security Cautions
When using this product, take appropriate measures to avoid the following security breaches.
 Leaks of private information via this product
 Illegal use of this product by a third party
 Interference or suspension of the use of this product by a third party
Take the following measures to avoid security breaches:
 To prevent illegal access, keep the update firmware (If you do not have the latest version of 
firmware, this can lead to blocked...

7 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
2 Installation
2.1 From Start to Finish
Notes
 Steps 1 to 5 are explained in this manual.
 Steps 6 is explained in Operating Instructions on the CD-ROM.
1Check the Accessories
2Connect This Product
3Set Up the PC
4Register an ISP and Connect to the Internet
5Connect a Network Camera
6Use This Product 

Installation/Troubleshooting
8
2.2 Check the Accessories
Main Unit and Included Accessories
The following items are provided with this product. Additional pieces can be ordered by calling 1-800-
332-5368.
Accessories to be Provided by Customer
 Ethernet Cable (category 5 straight cable) - 1 pc.
Network Camera
PC
Main unit ........................ 1 pc.AC adaptor..................... 1 pc. 
(Cord length: approx. 3 m (9.8 
feet))
Order No. PQLV202Y
AC cord ......................... 1 pc. 
(Cord length:...

9 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
2.3 Connect This Product
1.Raise the antenna.
2.Connect the modem to this products WAN jack.
3.Connect the PC to this products LAN jack.
4.Insert the AC adaptor cord into the DC IN jack of this product.
5.Insert the AC cord into the AC adaptor socket and the plug into an outlet. (This product will be 
turned on automatically
.)
When using the stand
To the outlet
AC adaptor 
(included) AC cord 
(included)
PCModemInternet
1. 2. 3....

Installation/Troubleshooting
10
2.4 Set Up the PC
Using Windows® XP
It is necessary to log in as the administrator to change the settings on Windows XP.
1.From the Start menu, select My Computer, My 
Network 
Places and then View network 
connections.
2.Right-click the Local Area Connection icon and 
select Properties.
3.Select Internet Protocol (TCP/IP), and click 
[Properties].
4.Click [Advanced...].
5.Check that the Default gateways field is empty, 
and click [OK].
 If an IP address is entered in the...