Panasonic Network Camera BL-C30C Operating Instructions
Have a look at the manual Panasonic Network Camera BL-C30C Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
Operating Instructions
76
SettingDescription
Server IP
Address or
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255) and 3
periods such as 192.168.0.253. But 0.0.0.0 and
255.255.255.255 are not available. Or set a host name (1—
255 characters).
Por t N o. Enter the number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
If your ISP requires a login ID, set it (0—63 characters).
Password*2 If your ISP requires...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-75.png "Page 76
Operating Instructions
76
SettingDescription
Server IP
Address or
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255) and 3
periods such as 192.168.0.253. But 0.0.0.0 and
255.255.255.255 are not available. Or set a host name (1—
255 characters).
Por t N o. Enter the number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
If your ISP requires a login ID, set it (0—63 characters).
Password*2 If your ISP requires...")
![Page 77
Operating Instructions
77
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-76.png "Page 77
Operating Instructions
77
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [")
![Page 78
Operating Instructions
78
SettingDescription
SMTP Server IP
Address or Host
Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255) and
3 periods such as 192.168.0.253. But 0.0.0.0 and
255.255.255.255 are not available. Or set a host name
(1—255 characters).
Por t N o. Enter the number (1—65535). Usually set to 25.
POP3 Server IP
Address or Host
Name
*1
If you set the server IP address, set 4 digits (0—255) and
3 periods such as...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-77.png "Page 78
Operating Instructions
78
SettingDescription
SMTP Server IP
Address or Host
Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255) and
3 periods such as 192.168.0.253. But 0.0.0.0 and
255.255.255.255 are not available. Or set a host name
(1—255 characters).
Por t N o. Enter the number (1—65535). Usually set to 25.
POP3 Server IP
Address or Host
Name
*1
If you set the server IP address, set 4 digits (0—255) and
3 periods such as...")
![Page 79
Operating Instructions
79
9.After you confirm the settings and click [Next>], set E-mail notification and click
[Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings using page
77 and page 78. When finished,
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
New settings are saved. The buffered images are deleted.
When finished, Success! is displayed.
SettingDescription
Disable The camera does not send an...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-78.png "Page 79
Operating Instructions
79
9.After you confirm the settings and click [Next>], set E-mail notification and click
[Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings using page
77 and page 78. When finished,
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
New settings are saved. The buffered images are deleted.
When finished, Success! is displayed.
SettingDescription
Disable The camera does not send an...")
![Page 80
Operating Instructions
80
11.Click [Go to Image Buffer/Transfer page].
The Image Buffer/Transfer page is displayed.
Notes
If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you set a long interval. In an emergency situation, the E-mail transfer can
be stopped by enabling privacy mode using a cell phone (see page
28).
Sensor transfer stops its operations until the camera finishes all transfers.
For...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-79.png "Page 80
Operating Instructions
80
11.Click [Go to Image Buffer/Transfer page].
The Image Buffer/Transfer page is displayed.
Notes
If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you set a long interval. In an emergency situation, the E-mail transfer can
be stopped by enabling privacy mode using a cell phone (see page
28).
Sensor transfer stops its operations until the camera finishes all transfers.
For...")
![Page 81
Operating Instructions
81
2.15 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The camera image
turns to a gray screen outside the operation time.
Notes
If you wrongly set the time period, your privacy may be seen. Confirm the
time period after the setup.
If you access the camera as an administrator, you can view the image
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click No. to set the operation time.
Note
If No. 1—7 are...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-80.png "Page 81
Operating Instructions
81
2.15 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The camera image
turns to a gray screen outside the operation time.
Notes
If you wrongly set the time period, your privacy may be seen. Confirm the
time period after the setup.
If you access the camera as an administrator, you can view the image
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click No. to set the operation time.
Note
If No. 1—7 are...")
![Page 82
Operating Instructions
82
4.Click [Save] when finished.
New settings are saved.
The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in
other settings, the camera can be operated on both Monday and Tuesday.
Operation Time Select the [Always] option when you do not specify the time
period. If you want to specify the time period,...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-81.png "Page 82
Operating Instructions
82
4.Click [Save] when finished.
New settings are saved.
The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in
other settings, the camera can be operated on both Monday and Tuesday.
Operation Time Select the [Always] option when you do not specify the time
period. If you want to specify the time period,...")
![Page 83
Operating Instructions
83
2.16 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has
four options.
Always on.
Turn the indicator on when the camera is accessed.
Turn the indicator on during sensor reaction.
Always off.
1.Click [Indicator Control] on the Setup page.
2.Select indicator option.
Clicking [Cancel] cancels your settings without saving changes.
Notes
See page 8 in the Installation/Troubleshooting guide for indicator
display.
...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-82.png "Page 83
Operating Instructions
83
2.16 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has
four options.
Always on.
Turn the indicator on when the camera is accessed.
Turn the indicator on during sensor reaction.
Always off.
1.Click [Indicator Control] on the Setup page.
2.Select indicator option.
Clicking [Cancel] cancels your settings without saving changes.
Notes
See page 8 in the Installation/Troubleshooting guide for indicator
display.
...")
![Page 84
Operating Instructions
84
2.17 Enabling Privacy Mode
Pressing the privacy button turns the camera into privacy mode. You can keep your
privacy in privacy mode. In this case, the camera operation stops, and the image
transfer by timer or sensor (see page
60 or page 69) is also stopped. The indicator
turns red, and viewers see a gray screen. Privacy mode can be controlled from a
cell phone (see page
27) or a PC.
1.Click [Privacy Mode] on the Setup page.
2.Click [Save] when finished.
Selecting...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-83.png "Page 84
Operating Instructions
84
2.17 Enabling Privacy Mode
Pressing the privacy button turns the camera into privacy mode. You can keep your
privacy in privacy mode. In this case, the camera operation stops, and the image
transfer by timer or sensor (see page
60 or page 69) is also stopped. The indicator
turns red, and viewers see a gray screen. Privacy mode can be controlled from a
cell phone (see page
27) or a PC.
1.Click [Privacy Mode] on the Setup page.
2.Click [Save] when finished.
Selecting...")
![Page 86
Operating Instructions
86
3.1.1 Confirming the Status
The Status page allows you to check the status of the camera. The status
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See Panasonic Network Camera support website at http://panasonic.co.jp/
pcc/products/en/netwkcam/ for details about status information.
3.1.2 Confirming the Wireless Status
The Wireless Status page allows you to check the wireless information. The
wireless status information...](http://img.usermanuals.tech/thumb/58/74588/w64_bl-c30c_en_om_d-85.png "Page 86
Operating Instructions
86
3.1.1 Confirming the Status
The Status page allows you to check the status of the camera. The status
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See Panasonic Network Camera support website at http://panasonic.co.jp/
pcc/products/en/netwkcam/ for details about status information.
3.1.2 Confirming the Wireless Status
The Wireless Status page allows you to check the wireless information. The
wireless status information...")
Operating Instructions 81 2.15 Specifying Operation Time The Operation Time page allows you to limit the operation time. The camera image turns to a gray screen outside the operation time. Notes If you wrongly set the time period, your privacy may be seen. Confirm the time period after the setup. If you access the camera as an administrator, you can view the image outside the time period. 1.Click [Operation Time] on the Setup page. 2.Click No. to set the operation time. Note If No. 1—7 are disabled, the camera can always be operated. 3.Check [Enable], set the time, and click [Save] Clicking [Cancel] takes you back to the previous page without saving changes. SettingDescription Enable Check the box to enable the setting. Clear the box to disable it. A day of the week Check the box to enable the day. Clear the box to disable it.
Operating Instructions 82 4.Click [Save] when finished. New settings are saved. The Operation Time page is displayed. About Operation Time In the operation time settings, the enabled settings take priority over the disabled settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in other settings, the camera can be operated on both Monday and Tuesday. Operation Time Select the [Always] option when you do not specify the time period. If you want to specify the time period, select the time period option and set the time period. Setting Description
Operating Instructions 83 2.16 Changing Indicator Display The Indicator Control page allows you to select Indicator operation. Indicator has four options. Always on. Turn the indicator on when the camera is accessed. Turn the indicator on during sensor reaction. Always off. 1.Click [Indicator Control] on the Setup page. 2.Select indicator option. Clicking [Cancel] cancels your settings without saving changes. Notes See page 8 in the Installation/Troubleshooting guide for indicator display. Selecting [Never turn indicator on] keeps indicator always off. 3.Click [Save] when finished. New settings are saved. When finished, Success! is displayed. 4.Click [Go to Indicator Control page]. The Indicator Control page is displayed.
Operating Instructions 84 2.17 Enabling Privacy Mode Pressing the privacy button turns the camera into privacy mode. You can keep your privacy in privacy mode. In this case, the camera operation stops, and the image transfer by timer or sensor (see page 60 or page 69) is also stopped. The indicator turns red, and viewers see a gray screen. Privacy mode can be controlled from a cell phone (see page 27) or a PC. 1.Click [Privacy Mode] on the Setup page. 2.Click [Save] when finished. Selecting [Enable] and clicking [Save] turn the camera into privacy mode. Notes To turn the camera into normal operation, press the privacy button on the front of the camera (see page 8 in the Installation/Troubleshooting guide) during privacy mode. Or click [Disable Privacy Mode] after you log in as an administrator. If you log in as an administrator, you can disable privacy mode from your cell phone (see page 27). SettingDescription Privacy Button Clearing the Enable box disables the privacy button on the front of the camera. Privacy Mode Selecting [Enable] and clicking [Save] puts the camera into privacy mode.
Operating Instructions 85 3 Camera Maintenance 3.1 Maintenance page Maintenance (1)StatusDisplays the camera settings and status (see page 86). (2)Wireless StatusDisplays wireless information (see page 86). (3)RestartRestarts the camera (see page 87). (4)Update FirmwareUpdates the camera firmware (see page 88). (5)Save SettingsCreates a configuration file (see page 91). (6)Load SettingsLoads settings from a configuration file (see page 92). (7)Reset to Factory DefaultResets the camera to its default settings (see page 93). (1) (2) (3) (4) (5) (6) (7)
Operating Instructions 86 3.1.1 Confirming the Status The Status page allows you to check the status of the camera. The status information provides support for troubleshooting. Clicking [Status] displays the following page. Note See Panasonic Network Camera support website at http://panasonic.co.jp/ pcc/products/en/netwkcam/ for details about status information. 3.1.2 Confirming the Wireless Status The Wireless Status page allows you to check the wireless information. The wireless status information provides support for troubleshooting regarding wireless connection. Clicking [Wireless Status] displays the following page.
Operating Instructions 87 3.1.3 Restarting the Camera The camera restarts by disconnecting the plug of the AC cord from the outlet and reconnecting it again. The camera can also be restarted on the Restart page. Note When the camera restarts, the buffered images will be deleted. 1.Click [Restart] on the Maintenance page. 2.Click [Restar t]. Restarting takes about 90 seconds. The Top page is displayed when finished.
Operating Instructions 88 3.1.4 Updating the Camera Firmware The Update Firmware page allows you to update the camera firmware. If the new firmware is available, install it into the camera. Notes Do not turn off the power during firmware update. All buffered images will be deleted after the firmware update. The firmware version is displayed on the Top page and the Status page. 1.Download the new firmware on the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your PC. 2.Click [Update Firmware] on the Maintenance page. 3.Click [Update Firmware]. The camera restarts.
Operating Instructions 89 The Update page is displayed in about 90 seconds. 4.Click [Browse...]. A dialog box is displayed to select the firmware. 5.Select the firmware (including directory information) and click [Open]. The firmware file name is displayed. 6.Confirm the firmware file name, and click [Update Firmware]. Clicking [Cancel] takes you back to the Top page without firmware update. The next message is displayed during update. The camera restarts automatically after update. The Top page is displayed in about 90 seconds.
Operating Instructions 90 7.Confirm that the version number on the Top page is updated. If the version number is updated, the firmware update is complete. Updated version