Panasonic Network Camera BL-C30 Additional Feature Guide

Additional Feature Guide
11
[For BL-C30] Setting the Motion Detection
The threshold and sensitivity can be adjusted for the Motion Detection on the 
Motion Detection page.
Threshold: If the threshold is set low, this function detects nearly all movements.
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets 
jumpy.
1.Click [Motion Detection] on the Setup page.
2.Click the Motion Detection bar in Threshold to set the threshold level.
3.Click the Motion Detection bar in...

Additional Feature Guide
12
Note
 The Threshold and Sensitivity settings are enabled after saving, and 
reflected in preview. 
 The Click to Center feature is available.
Note
No responsibility will be taken by our company with respect to consequences 
resulting from the use of the Motion Detection feature. The Motion Detection 
feature is not suitable and not recommended for uses that require a high 
reliability constantly such as surveillance, etc.
[What is the threshold?]
The threshold is the minimum...

Additional Feature Guide
13
[What is the sensitivity?]
The sensitivity is the level of brightness detected as motion by the camera. A 
high sensitivity setting enables the camera to detect slight brightness changes. 
Lower the sensitivity to make the camera detect only big brightness changes.
Note
Lowering the threshold and increasing sensitivity enables the camera to 
detect slight movements easily.
Note
 Motion Detection is activated by changes in the outline of objects and 
brightness changes. This...

Additional Feature Guide
14
[For BL-C30] The Sensor Log Notification feature
A sensor log sent once a day at a specified time can be checked.To enable Sensor 
Log, set Sensor or Motion Detection for Trigger Setting and check [Enable].
1.Click [Sensor Log] on the Setup page.
 When enabling the image/buffer transfer setting and selecting Sensor or 
Motion Detection in the Trigger page, the Sensor log window is displayed.
2.Set each parameter.
3.Click [Save].
 Clicking [Cancel] cancels your settings...

Additional Feature Guide
15
Note
 When the settings are saved, the number of new sensor logs becomes 0.
 The camera works only with an SMTP (Simple Mail Transfer Protocol) 
server. It does not work with mail servers like Hotmail® that use a web 
browser.
SettingDescription
A setup of 
operation Sensor log operation can be set here.
Time Set the day of the week and time to send sensor logs via 
E-mail.
SMTP Server IP 
Address or Host 
Name
*1
 If you set a server IP address, set 4 numbers (0—255) and...

Additional Feature Guide
16
How to 
authenticateThe authentication method can be selected: 
[No authentication], [POP before SMTP authentication] or 
[SMTP authentication].
POP server authentication may be required by your ISP. In 
that case, set POP before SMTP authentication.
 No authentication: No authentication when sending an e-
mail.
 POP before SMTP authentication: Some SMTP servers 
that send e-mails do not have an authentication feature. 
Therefore, the camera uses the authentication of a POP...

Additional Feature Guide
17
[For BL-C30] French, Simplified Chinese and Korean
French and Simplified Chinese can be displayed on all pages and Korean can be 
displayed on limited pages.
SettingDescription
Language Select the initial language from English, Japanese, French, 
German, Italian, Spanish, Simplified Chinese, Russian or 
Korean. The selected language is displayed as the initial 
language on the Top, Single Camera, Multi-Camera and 
Buffered Image pages. If you select English, Japanese, 
French...

Additional Feature Guide
18
Your favorite banner and website
A banner of your choice can be displayed on the Single Camera page. A URL can 
also be linked to this banner. The users can click the banner to access the URL. 

Additional Feature Guide
19
SettingDescription
Banner DisplayWhen checked to [Enable], the setting will be enabled. 
When unchecked, the setting will be disabled.
Note
 When the Banner Display is enabled, the camera 
accesses the Image URL every time the Single 
Camera page is displayed. The intermittent and 
continuous switching of the Single page burdens 
the PC that stores the image linked with the URL.
 If the image URL linked with an image stored in a 
PC that requires an authentication is set,...

Additional Feature Guide
20
[For BL-C30] Selfcamera registration
This camera can be registered on the Multi-Camera page without having to enter 
all the details.
By clicking [Clicking this link, enters this cameras settings.], the settings of the 
selfcamera are entered automatically. selfcamera is displayed as the IP Address 
or Host Name, -- is displayed as the Port No., and the model no. is displayed as 
the Camera Name.
Note
The selfcamera is registered at No. 1 by default.