Panasonic Network Camera Bb Hcm403a Operating Instructions

Operating Instructions
21
1.4.4 Tilt Operation
The administrator can tilt the camera by using the Click to Center feature.
Tilt range
Note
 When the lens moves to its ends, shadows may be displayed partially. This is 
not a malfunction.
 The tilt operation is not available when using the Network Camera Recorder 
and Wireless Camera Monitoring System.
Tilt upwards
Tilt downwards
0 65
Tilt 

Operating Instructions
22
1.4.5 Capturing a Still Image
Still images can be saved on your PC.
1.Operate tilt and select a resolution to display an image.
2.Click the capture image button.
 The camera image opens in another window.
3.Right-click the image, and select [Save Picture As...].
 The Save as dialog box is displayed.
4.Specify a folder, enter the file name and click [Save].
 The camera image is saved at that location.
5.Click [Close].
Capture Image Button 

Operating Instructions
23
1.4.6 Using the Operation Bar
(1) End Display: When the tilt has reached the end of its 
range, the End Display (Up End or Down End) appears. 
(2) Home Position (the administrator only): Applies 
the camera direction to a preset position.
(3) Program (the administrator only): Registers the 
home position.
(4) Brightness: Adjusts image brightness in 9 steps 
including [STD] (Standard). Clicking [-] or [+] changes the 
image brightness.
(5) Output Control: Controls the output...

Operating Instructions
24
1.4.7 Setting the Home Position (the administrator only)
Registering the Home Position
The home position is the position that the camera moves to when the power is 
turned on. The administrator can register one position for the home position.
Viewing the Home Position
Note
 Registering and operating the home position is not available when using the 
Network Camera Recorder and Wireless Camera Monitoring System.
1.Click [Program].
 [Program] switches to [Cancel]. 
Click...

Operating Instructions
25
1.5 Listening to Camera Audio and Talking 
through the Camera
1.Access the camera (see page 11).
 The Top page is displayed.
2.Click the [Single] tab at the top of the page.
3.The Audio Control Bar (Talk Button, Listen Button and Adjustment Bar) is 
displayed at the top of the screen. Listening mode and talking mode are 
selected using the relevant icons. This feature is only displayed for general 
users when it is enabled.
Audio Feature
Talk Button
Listen Button
Adjustment...

Operating Instructions
26
Note
 The Talk button and Listen button cannot be used simultaneously. The Talk 
feature is stopped during listening. The Talk feature can be used by only one 
user at a time. The Listen feature can be used by a maximum of 10 users 
simultaneously. If the audio breaks up, reduce the maximum bandwidth (see 
page 41 or page 46). In this case, the number of users who can listen 
simultaneously is also reduced.
 Audio features such as camera microphone sensitivity can be set up on...

Operating Instructions
27
1.6 Viewing the Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each 
camera on the Multi-Camera Setup page (see page 135).
1.Access the camera (see page 11).
 The Top page is displayed.
2.Click the [Multi] tab at the top of the page.
 The Multi-Camera page can display up to 12 camera images.
3.Close the web browser. Capture Image Button (See page 22)
Switches displayed 
cameras. If you select 
[All] at the View Type, 
video (Motion...

Operating Instructions
28
Note
 When selecting [All] for the View Type, all images are displayed in 160 x 120 
pixels resolution, and the Audio Control Bar is not displayed.
 640 x 480-pixel images cannot be displayed on the Multi-Camera page.
 When viewing video (Motion JPEG), we recommend using an Ethernet 
switching hub instead of a repeater hub to prevent degradation in video display.
 Due to network congestion or the number of accesses, the refresh interval may 
increase.
 If the refresh...

Operating Instructions
29
1.7 Viewing the Buffered Image page
To buffer images in the cameras internal memory, you need to set up the image 
transfer settings (see page 84, page 94, or page 106). Buffered images can be 
viewed on this Buffered Image page.
Note
 Sound cannot be buffered on the Buffered Image page.
1.Access the camera (see page 11).
 The Top page is displayed.
2.Click the [Buffered Image] tab at the top of the page.
3.Click the trigger number.
The trigger number is displayed (see page...

Operating Instructions
30
4.Display images by clicking buttons below.
The date and time when the images 
were buffered are displayed.
The date, time and frame number 
are displayed.
[Play]:
The buffered images are displayed in sequence.
[]:
The previous or next image is displayed.
[First], [], 
[Last]:
The first or last image, or the 10th, 100th, 1000th or 10000th image before or 
after the current image appears.
[Download]
Clicking [Download] after specifying the number of images saves images to the...