Panasonic Network Camera Bb Hcm381a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 121
 The Update page is displayed in about 1 minute.
4.Click [Browse...].
 A dialog box is displayed to select the firmware.
5.Select the firmware (including directory information) and click [Open].
 The firmware file name is displayed.
6.Confirm the firmware file name, and click [Update Firmware].
 Clicking [Cancel] takes you back to the Top page without firmware update.
 The next message is displayed during update.
 The camera restarts automatically after update.
 The Top page is displayed in about 1 minute. 
						

							Operating Instructions
122
7.Confirm that the version number on the Top page is updated.
 If the version number is updated, the firmware update is complete.
Network Camera 
BB-HCM381A
Version ∗.∗∗
Running in IPv4 mode.
Updated version 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 123
3.1.5 Creating Configuration File
A configuration file can be saved on your PC. You can load the camera settings 
from the configuration file on the Load Settings page (see page 124).
Note
The saved image has privacy information. Prevent private information leaks.
1.Click [Save Settings] on the Maintenance page.
2.Click [Save].
3.Click [Save] on the File Download dialog box.
4.Specify the location, and click [Save] on the Save As dialog box.
 The configuration file is saved in the location.
Note
 The file extension (.dat) cannot be changed. If you change it, the settings 
cannot be loaded.
 If you try to updating the camera, create a configuration file after updating 
the firmware. If there is a firmware version difference between the camera 
that you create a configuration file from and the camera that you try to load 
settings to, the settings may not be loaded to the camera. 
						

							Operating Instructions
124
3.1.6 Loading Settings from a Configuration File
The settings can be loaded from a configuration file. If you reset the camera to 
factory default, the camera can load its settings from the configuration file.
Note
 The configuration file has network settings. When the settings are loaded, 
the network settings are also loaded as they were saved. 
 If you try to update the camera, create a configuration file after updating 
the firmware. If there is a firmware version difference between the camera 
that you create a configuration file from and the camera that you try to load 
settings to, the settings may not be loaded to the camera. Save settings 
after updating the firmware.
1.Click [Load Settings] on the Maintenance page.
2.Click [Browse...].
3.Select the configuration file on the Choose file dialog box, and click [Open].
 The file name is displayed in the data field.
4.Confirm the file name, and click [Load].
5.Click [Restart].
 The camera restarts, and the Top page is displayed. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 125
3.1.7 Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is 
clicked.
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
 The indicator blinks orange, and then turns off for 10 seconds.
 All camera settings (user name, password, IP address, subnet mask etc.) 
are reset to factory default.
 If the camera is reset to factory default, the network connection mode 
changes to [Automatic Setup]. Reconfigure the camera refer to the 
Installation/Troubleshooting if necessary.
Note
 The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 67). Set it again.
 See page 131—page 139 for default settings.
 Pressing the FACTORY DEFAULT RESET button resets the camera to the 
factory default (see page 130).
 All buffered images on the internal memory are deleted when resetting the 
camera to factory default. The buffered images on the SD memory card 
are not deleted.
 The reset operation takes about 1 minute.
 Do not turn off the camera during the reset operation. 
						

							Operating Instructions
126
3.2 Support page
3.2.1 Seeing Help page
The Help page displays explanations for each feature about the following 1. to 6. 
items.
Clicking [Help] on the Support page displays the next page.
3.2.2 Seeing Product Information
You can see product information on the Panasonic Network Camera support 
website.
Clicking [Product Information] on the Support page displays the URL, click it.
Note
If the camera is not connected to the Internet, the website cannot be displayed.
Support
(1)HelpDisplays the Help page (see page 126).
(2)Product 
InformationDisplays product information website (see page 126).
(3)Support 
InformationDisplays support information website (see page 127).
(1)
(2)
(3) 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 127
3.2.3 Seeing Support Information
You can see support information on the Panasonic Network Camera support 
website.
Clicking [Support Information] on the Support page displays the URL, click it.
Note
If the camera is not connected to the Internet, the website cannot be displayed. 
						

							Operating Instructions
128
3.3 External I/O
If you connect the external devices such as sensors to the External I/O and image 
buffer/transfer by alarm signal is set, the camera image is transferred by the alarm 
detection.
Explanation of the External I/O
Note
The External I/O (Input/Output) are independent. Output terminal is controlled 
only by External Output Control page on page 115.
PinFeatures
GGND pin
1External Sensor Input 1
 Use it by opening or GND short-circuit.
GGND pin
2External Sensor Input 2
 Use it by opening or GND short-circuit.
3External Device Control Output
 You can control it on the External Output page (see page 115).
 It is an open collector circuit, and the maximum drawing-in current 
is the same as pin 4. Do not exceed the voltage of DC power 
output terminal (pin 4).
4DC Power Output Terminal
 10.5—13.5 V DC
 Maximum of 100 mA load drive is possible. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 129
Circuit Diagram Example
CAUTION
The external I/O is not capable of connecting directly to devices that 
require large amounts of current. In some case, a custom interface 
circuit (customer-provided) may have to be used. Serious damage to 
the camera may result if a device is connected to the external I/O that 
exceeds its electrical capability (see page 128).
The low voltage/current circuits and high voltage/current circuits are 
in the camera circuit. The qualified electrician should do the wiring 
not by yourself. Incorrect wiring could damage the camera. You 
could receive the fatal electric shock.
Light
Door Sensor 1 (Alarm 1) Door Sensor 2 (Alarm 2)Relay Camera
12 V
2 3 4
G
1
G
DC10.5 V–13.5 V 
						

							Operating Instructions
130
3.4 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera.
 Press the FACTORY DEFAULT RESET button for 1 second when the camera 
is on.
 The indicator blinks orange, and then turns off for 5 seconds.
 Do not turn off the camera until the indicator lights green.
Note
 The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 67). Set it again.
 See page 131—page 139 for default settings.
 All buffered images on the internal memory are deleted when resetting the 
camera to factory default. The buffered images on the SD memory card 
are not deleted.
 The reset operation takes about 1 minute.
FACTORY DEFAULT RESET button 
(Press the button with a pointed object)