Panasonic Network Camera Bb Hcm371a Operating Instructions

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  131
3.4 RESTART Button
The camera has a RESTART button on the side.
Pressing the RESTART button restarts the camera.
Notes
•After removing the sunshade, press the RESTART button.
•All buffered images on the internal memory are deleted when restarting 
the camera. The buffered images on the SD memory card are not deleted.
•Restarting takes 90 seconds.
RESTART Button
(Press the button with a pointed...

Operating Instructions
132
3.5 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the side.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera. To restore the wireless connection, access the camera by using the wired 
connection and set up the wireless configuration. (see page 17 of the Installation/
Troubleshooting)
•Press the FACTORY DEFAULT RESET button for 1 second...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  133
3.6 Default Setting List
Basic
Items Default Required Notes
Network 
(IPv4)Connection Mode Automatic 
Setup- Automatic Setup/
Static/DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable - -
Port No. 
(Static/DHCP only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)192.168.0.
253When 
setting...

Operating Instructions
134
Network 
(IPv6)Connection Mode Automatic 
Setup- Automatic Setup/
Static
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Port No. 
(Static only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)[Blank] When 
setting Static*1
Default Gateway (Static 
only)[Blank] When using 
Gateway*1
DNS Server 1
DNS Server 2[Blank] When using 
DNS*1
Max. Bandwidth Usage 
(Mbps)Unlimited - 0.1, 0.2, 0.3, 0.5, 1 
or Unlimited
Connection Type Auto 
Negotiation--...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  135
Wireless Communication mode IEEE 
802.11b/g--
(Channel) Auto - -
SSID BBHCMA - Up to 32 
characters, signs 
or numbers
(Speed) Auto - -
Encryption (WEP) No 
encryption--
Authentication Open System - -
WEPKey 1—4 ASCII 13 
Characters 
128 bit--
UPnP Auto Port Forwarding Disable - -
Display Shortcut Icon in 
My Network PlacesEnable - -
Viewnet
cam.comEnable No check - -
Date and 
TimeTime Setting...

Operating Instructions
136
Camera Camera Name Network
CameraRequired 1—15 characters
*6
White Balance Auto - Auto/Fixed Indoor/
Fixed Fluorescent 
(White)/Fixed 
Fluorescent 
(Daylight)/Fixed 
Outdoor/Hold
Pan Range (Minimum) -60 degrees - -60—+60 degrees
(Home Position) 0 degrees - -60—+60 degrees
(Maximum) +60 degrees - -60—+60 degrees
Tilt Range (Minimum) -45 degrees - -45—+20 degrees
(Home Position) 0 degrees - -45—+20 degrees
(Maximum) +20 degrees - -45—+20 degrees
Return to Specified 
Position...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  137
Account
Items Default Required Notes
Security: 
AdministratorGeneral 
AuthenticationDo not permit 
access from 
guest users --
User Name [Blank] When setting 
administrator6—15 characters 
*3
Password [Blank] When setting 
administrator6—15 characters 
*3
Retype 
Password[Blank] When setting 
administrator6—15 characters 
*3
General User User ID List [Blank] - -
User Name [Blank] When setting...

Operating Instructions
138
Advanced
Items Default Required Notes
Image 
DisplaySingle Camera Image 
Resolution320 x 240 - 320 x 240 or 640 
x 480
Single Camera Image 
QualityStandard - Favor Clarity, 
Standard or 
Favo r  Mo ti o n
Single Camera 
Refresh IntervalMotion - 3, 5, 10, 30, 60 
(s) or Motion
Multi-Camera Image 
Resolution320 x 240 - 160 x 120 or 320 
x 240
Multi-Camera Image 
QualityStandard - Favor Clarity, 
Standard or 
Favo r  Mo ti o n
Multi-Camera Refresh 
IntervalMotion When 
reducing...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  139
Multi-
CameraMulti-Camera [Blank] - -
Display Checked When setting 
Multi-Camera-
IP Address or Host 
Name[Blank] When setting 
Multi-CameraIP address*1 
Host name*5 is 
1—255 
characters.
Port No. [Blank] When setting 
Multi-Camera20, 21, 25 and 
110 are not 
available.
Camera Name [Blank] When setting 
Multi-Camera1—15 characters
*7
Buffer/
Tr a n s f e rStatus Off - -
Trigger Timer - -
Active...

Operating Instructions
140
Preset Buttons
Indicator 
ControlIndicator Control Turn indicator 
on when 
camera is on--
Items Default Required Notes
Preset 
ButtonsPreset 1 UpperLeft - -
Preset 2 UpperRight - -
Preset 3 LowerLeft - -
Preset 4 LowerRight - -
*1 In IPv4, set 4 digits (0—255) and 3 periods such as 192.168.0.253. But 
0.0.0.0 and 255.255.255.255 are not available.
In IPv6, set 8 hexadecimal digits divided with :. Consecutive 0s can be 
abbreviated as ::.
*2 Set the number of 1—65535.
*3 Enter...