Panasonic Network Camera Additional Feature Guide

							Additional Feature table
The following features have been added to the camera. Read the Operating 
Instructions and this Additional Feature Guide on the Setup CD-ROM before using 
the product.
Additional FeaturesContentsPag e
[For the U.S. model,  
KX-HCM280A]
Manual Setup
Manual Setup can be selected on the 
initial setting window of the Setup 
Program on the CD-ROM even if 
Automatic Setup (Local Access Only) 
has not been performed.page 3
Easier saving and viewing of 
images
Buffered images can be downloaded 
to PC and can be viewed using 
viewer software.page 4
SMTP authentication methodsSupport SMTP authentication when 
setting [E-mail] for the transfer 
method in Buffering or Transferring 
Images by Timer, Alarm Signal or 
Motion Detection Signal (except the 
U.S. model, KX-HCM280A), or when 
setting Alarm Log notification (except 
the U.S. model, KX-HCM280A), has 
been added.page 5
Simplified Chinese and KoreanSimplified Chinese is supported. 
Korean is supported on limited 
pages.page 8
Additional Feature Guide
Network Camera 
						

							Additional Feature Guide
2
Trademarks
• SD mark is a trademark of the SD Card Association.
 This software is based in part on the work of the Independent JPEG Group.
 All other trademarks identified herein are the property of their respective 
owners.
Abbreviations
 Network Camera is called Camera in this manual.
Your favorite banner and 
website
An image and its linked website can 
be specified for a banner on the 
Image Display page.page 9
Selfcamera registrationThis camera can be registered on the 
Multi-Camera page without having to 
enter all the details.page 11
Support of the 2 GB SD Memory 
Card (SD Memory Card-
compatible cameras only)
The camera supports the 2 GB SD 
Memory Card.page 12
Additional Features Contents Page 
						

							Additional Feature Guide
3
[For the U.S. model, KX-HCM280A] Manual Setup
Manual Setup can be selected on the initial setting window of the Setup Program 
on the CD-ROM even if Automatic Setup (Local Access Only) has not been 
performed. 
						

							Additional Feature Guide
4
Easier saving and viewing of images
Buffered images can be downloaded to PC and can be viewed using viewer 
software.
[Download]
Specify the number of images you want to download and click the download button 
to save the images to a specific location. Then use the viewer software to view the 
images. Viewer software can be downloaded from the Panasonic Network Camera 
support website at http://panasonic.co.jp/pcc/products/en/netwkcam/
Viewer software window 
						

							Additional Feature Guide
5
SMTP authentication methods
Support SMTP authentication when setting [E-mail] for the transfer method in 
Buffering or Transferring Images by Timer, Alarm Signal or Motion Detection 
Signal, or when setting Alarm Log notification, has been added. In accordance with 
this addition, the authentication setting page has been modified. Note that the U.S. 
model, KX-HCM280A, does not have the Motion Detection and Alarm Log 
Notification features.
 The page when setting [E-mail] for the transfer method in Buffering or 
Transferring Images by Timer, Alarm Signal or Motion Detection Signal. 
						

							Additional Feature Guide
6
 The page when setting Alarm Log notification (except the U.S. model,  
KX-HCM280A). 
						

							Additional Feature Guide
7
SettingDescription
How to 
authenticateThe authentication method can be selected: 
[No authentication], [POP before SMTP authentication] or 
[SMTP authentication].
POP server authentication may be required by your ISP. In 
that case, set POP before SMTP authentication.
 No authentication: No authentication when sending an e-
mail.
 POP before SMTP authentication: Some SMTP servers 
that send e-mails do not have an authentication feature. 
Therefore, the camera uses the authentication of a POP 
server that receives e-mails, before sending e-mails.
– POP3 Server 
IP Address or 
Host Name
*1:
*1Note that [Space], [], [], [&], [] are not available.
If you set a server IP address, set 4 
numbers (0—255) and 3 periods, such as 
192.168.0.253. Note that 0.0.0.0 and 
255.255.255.255 are not available. Or 
set a host name (0—255 characters).
You can set an IPv6 address.
– Port No.:Enter a number (1—65535). Usually set 
to 110.
–Login ID*2:
*2Note that [] is not available.
If your ISP requires a login ID to log in to 
a POP3 server, set it (1—63 characters).
– Password*2:If your ISP requires a password to log in to 
a POP3 server, set it (0—63 characters).
 SMTP authentication: Users are authenticated by user 
name and password on the SMTP server. Your ISP must 
support the SMTP authentication. The supported SMTP 
authentications of the camera are the LOGIN and PLAIN 
authentications. The CRAM-MD5 authentication is not 
supported.
–Login ID*2:If your ISP requires a login ID to log in to 
an SMTP server, set it (1—63 characters).
– Password*2:If your ISP requires a password to log in to 
an SMTP server, set it (0—63 characters). 
						

							Additional Feature Guide
8
Simplified Chinese and Korean
Simplified Chinese can be displayed on all pages and Korean can be displayed on 
limited pages.
SettingDescription
Language Select the initial language from English, Japanese, French, 
German, Italian, Spanish, Simplified Chinese, Russian or 
Korean. The selected language is displayed as the initial 
language on the Top, Single Camera, Multi-Camera and 
Buffered Image pages. If you select English, Japanese or 
Simplified Chinese, all pages will be displayed in the 
corresponding language. If you select another language, 
the Setup, Maintenance and Support pages will be 
displayed in English only. 
						

							Additional Feature Guide
9
Your favorite banner and website
A banner of your choice can be displayed on the Single Camera page. A URL can 
also be linked to this banner. The users can click the banner to access the URL. 
						

							Additional Feature Guide
10
SettingDescription
Banner DisplayWhen checked to [Enable], the setting will be enabled. 
When unchecked, the setting will be disabled.
Note
 When the Banner Display is enabled, the camera 
accesses the Image URL every time the Single 
Camera page is displayed. The intermittent and 
continuous switching of the Single page burdens 
the PC that stores the image linked with the URL.
 If the image URL linked with an image stored in a 
PC that requires an authentication is set, the 
authentication window will be displayed when 
displaying the Single Camera page.
 Banner userAll users:The banner can be displayed for 
all users.
Administrator only:The banner can be displayed for 
the administrator only.
General user only:The banner can be displayed for 
the general user only.
 Image URL*1
*1Note that [Space], [], [], [&], [] are not available.
Enter the image URL (1—127 characters) you want to 
display as a banner. When [Enable] is checked, enter 
the image URL.
 Link URL*1Enter the target URL (0—127 characters) you want to 
display when clicking the banner.