Panasonic Ne12521_ne21523 Owners Manual

- 11 -
How to Operate
A. MANUAL HEATING — 2 to 5 stage heating —
Example:  To cook food at HIGH power for 2 minutes and at LOW power for 1 minute
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
Follow steps 1 to 3 on page 10.
4Press Power Level Selector pad.
Each time the pad is pressed, the Power Level switches as the Power    
Level Selector pad illustration on page 10. 
The selected power level will be indicated and 2nd Stage Heating 
Indicator “2” will start to blink.
5Press Number/Memory pads “1”, “0” and...

- 12 -
How to Operate
PROGRAM MEMORY
Model No. NE-17723 (1300 memory):   1 digit input = 0 to 9, 2 digit input = 00 to 99, 3 digit input = 000 to 999 and A00 to C99Other models (30 memory):  A0 to C9  *For only A0 through A9 settings, you do not need to press Shift (A/B/C) pad.
To change the number of memory digits:
Press “Start” + “0” while the door is open. 1. 
Press the number of digits you want to set. (1 digit=1, 2 digits=2, 3 digits=3) 2. 
Press “Prog”. 3. 
Note:  The Digital Display Window...

- 13 -
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
3Press Shift (A/B/C) pad, Number/Memory pads “1” and “5”.
The selected pad number will appear and currently programmed    
information will be indicated.
4Press Power Level Selector pad.
Each time the pad is pressed, the Power Level switches as in the    
Power Level Selector pad illustration on page 10. The selected power 
level will be indicated, 1st Stage Heating Indicator “1” will start to blink.
5Press Number/Memory pads “1”, “0” and “0”.
The set...

- 14 -
D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 14-15)
Example:  To program 1.5 times of heating time for double quantity into Number/Memory pads “1” and 
“5” at A side
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.   
2Press Prog pad.
“PROG” will start to blink.   
3Press Shift (A/B/C) pad, Number/Memory pads “1” and “5”.
The selected pad number will...

- 15 - 4O2ELEASE0ROGRAM,OCK  
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.   
2While pressing Start pad, press Prog pad until “PROG” and “P” 
appear. (more than 2 seconds)
“PROG” and “P” will appear.    
3 seconds later, “0” will appear.
In Program Unlock mode:
s /VENREVERTSTOATWO
PRESSOPERATINGMODE.UMBER-EMORYPAD3TARTPAD	
s 2EPEATANDINTERRUPTFEATUREAREOPERATIONAL
s .UMBER-EMORYPADSCANBEPROGRAMMED
s...

- 16 -
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
5Within 3 seconds after pressing Prog pad at step 4, press Start pad.“PROG” will start to blink.    
The display changes to 1st, 2nd, and 3rd each time the Start pad is 
pressed and the settings change.
*The length of beep tone at the end of heating cycle
1st  : 3 beeps
2nd : short beeps for 60 seconds
3rd  :“Beep” sounds for 5 seconds, and then 3 beeps sound 30 seconds 
later and again 60 seconds later.  
(Buzzer reminder functions to prevent food forgotten...

- 17 -
How to Operate
G. PROGRAM LIST
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on and “0” will appear.   
2While pressing Start pad, press Number/Memory pad “1”.
All currently programmed information (the program set into each    
Number/Memory pad (000 to 999), Beep Tone, Program Lock, Oven 
Lamp settings when the door is open, Oven Lamp blink settings at the 
end of heating cycle and Oven Lamp reduction settings during cooking 
information) will...

- 18 -
How to Operate
H. CYCLE COUNTER
4ODISPLAYALLCOOKINGTIMESEVERUSED  
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on and “0” will appear.   
2While pressing Start pad, press Number/Memory pad “3”.
All the cooking times that were ever used appear.   e.g.
  
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on and “0” will appear.   
2While pressing Start pad, press Power Level Selector pad.
The...

- 19 -
Example:  To display the filter cleaning alarm counter
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
1Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.   
2While pressing Start pad, press Number/Memory pad “5”.
The cumulative total cooking time starts over and displayed after it is    
cleared.e.g.
s SECONDSLATERhvWILLAPPEAR
J. OVEN LAMP
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 14-15)
/VEN,AMPSETTINGSWHENTHEDOORISOPEN  
Example:  To...

- 20 -
How to Operate
/VEN,AMPBLINKSATTHEENDOFHEATINGCYCLE  
Example:  To turn the blinking Oven Lamp ON at the end of heating cycle
PAD INSTRUCTIONDIGITAL DISPLAY WINDOW
5Within 3 seconds after pressing Prog pad at step 4, press Start pad.“PROG” will start to blink.   
The previously set Oven Lamp blink settings are displayed.
6Press Start pad.
“oFF”     “on”  “oFF” is repeated each time the pad is pressed.
7Press Prog pad.
“PROG” will stop blinking, and the Oven Lamp blink settings will appear...