Panasonic Multimedia Audio System Mw-10 Operating Instructions

							11
RQT9522
Operations
Listening to an iPod
Usable iPods ¼P5
Attaching/Recharging the iPod
Turn off the iPod before attaching.
Remove the iPod if it is in the iPod case.
1.  Attach the Dock adaptor supplied with the iPod.Insert until it clicks.
A MW-10 top view
B Dock  adaptor  C Hook
•
2.  Attach the iPod (D). Insert and remove the iPod slowly.
Do not insert the iPod back to front.
•
•
A B
D
C
Recharging starts when the iPod is connected.
When the unit is off, the recharging indicator appears on the 
unit’s screen. The recharging indicator may not disappear even if the 
recharging is complete.
NoteDisconnect the iPod from the unit after recharging is 
complete when you will not use it for a long period of time. 
Even if the battery is discharged naturally after recharging, 
the battery is not additionally charged.
When the Dock adaptor is not supplied with the iPod, 
purchase it from Apple Inc.
Please read the operating instructions supplied with the 
iPod.
No warranty is provided against any trouble about the iPod 
data management.
iPod track selection menu
Playlists Searching from all playlists
Artists Searching from artist names
Albums Searching from album titles
Songs Searching from all tracks 
registered to the iPod
Podcasts Searching from episodes of radio 
program obtained at iTunes store
Audiobooks Searching from titles in 
Audiobooks purchased at iTunes 
store or “audible.com”
•
•
•
•
•
•
•
„
Playing music and video on the iPod
Turn down the volume of this unit.
1.  Attach the iPod. (¼left)
2. Press [iPod  q/h].
For the main unit, press 
[AUDIO SELECTOR] to 
select “iPod” and press 
[q/h].
Playback will start.
e.g.) Audio  screen
A 
 Playlist name Artist name Album name
 Track name
B Playback  status
C Track number/Number of  tracks
D Elapsed playing time •
iPod Andes 
Los Panas 
Al Partir 
1/22 
Al Final 
Al Partir 
Ave de Cristal 
Condor Malcu 
Cutimuy 
El Arbol de mi Destino 
El ultimo Amanecer 
Ingratitud 
La Ventana 
Mi Pecado 
 
2:20 
A
BC
D
Pause [iPod q/h] or [g]
Press [iPod q/h] to resume.
•
Skip While playing or paused
[u/t, y/i]
Fast backward/Fast 
forward (Search) [u/t, y/i]
While playing or paused, press 
and hold the button until it 
reaches the desired position.
Adjusting the volume [+ VOL –]
Viewing audio 
information [AUDIO INFO]
NoteDepending on the display specifi
 cations, the iPod video is 
displayed slightly horizontally long.
If you open the display during the video playback, the 
display becomes dark, however, the video playback 
continues.
For iPod, video playback may not be available depending 
on the version.
Photos on the iPod cannot be played on this unit.
Searching for the track/video to play1. Press [SELECT TRACKS].
2. Press [e, r] to select “Music”, “Videos” or “List of  Currently Playing Tracks” and press [OK].When you select “Music”, the track selection menu 
appears. (¼left)
3. Press [e, r] and [OK] to search for the track and play.
When you press [w, q] on the screen that displays the 
selection tab (
,  ), you can switch the list.
•
•
•
•
„
•
•
Listening to a CD / Listening to an iPod
325[email protected]@1JOEE


 325[email protected]@1JOEE


 






 
						

							12
RQT9522
Shuffl e
(only for music)
Tracks or albums are 
played at random. Press [PLAY MODE].
Each time you press
Songs ˆ Albums ˆ Off
Repeat
Normal/Shuffl
 e 
playback can be 
repeated. Press [REPEAT].
Each time you press
One ˆ All ˆ Off
NoteFor the album shuffl
 e, the tracks in the album are played 
back in the proper order.
If video is played back, the Shuffl  e setting may become 
“OFF”.
When a play mode is switched, the track list display on the 
audio playback screen may be different from the tracks 
played back. If this occurs, select tracks from the track 
selection menu again.
If the iPod with Shuffl  e/Repeat set is attached 
to this unit:
Playback is performed with the same playback method.
Also, even if the iPod is removed after the playback method 
is set on this unit, the iPod still keeps the same playback 
method.
“Made for iPod” means that an electronic accessory 
has been designed to connect specifi  cally to iPod and 
has been certifi  ed by the developer to meet Apple 
performance standards.
Apple is not responsible for the operation of this device or 
its compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. 
and other countries.
•
•
•
„
Listening to an iPodListening to the radio
Adjust the frequency to listen (Manual Tuning)
1.  Press [FM] or [AM].
For the main unit, press [AUDIO SELECTOR] to 
select “FM” or “AM”.
•
2.  Press [PLAY MODE] to select “Manual Tuning”.
3. Press [u/t,  y/i] to 
tune in the station you like.
A Lights up when signals are  received.
B Lights up when the FM  stereo broadcast is 
received.
FM 
MHz
Manual     Stereo 
A
B
88.1
Automatic tuning
Press and hold [u/t, 
y/i] 
until the frequency indicator starts 
to run.
Stops when the broadcast is 
received.
If jamming is present in the 
surroundings during the 
automatic tuning, the broadcast 
may not be received and the 
frequency may stop.
To stop the automatic tuning, 
press [u/t, y/i] again.
•
•
•
Stopping the radio 
sound [g]
To listen to the radio again, press 
[FM] or [AM]. (For the main unit, 
press [AUDIO SELECTOR].)
FM frequency step
The step is factory-set to 200 kHz, but you can change it to 
receive broadcasts allocated to 100 kHz steps.
1. Press [FM].
2. Press [PROGRAM].
3. 
Press [e, r] to select the “Frequency Step” and press 
[OK].
4. Press [e, r] to select the “100 kHz” or “200 kHz” and  press [OK].
„
325[email protected]@1JOEE


 325[email protected]@1JOEE


 






 
						

							13
RQT9522
Operations
Memorizing broadcast stations to listen (Preset 
Tuning)Memorizing broadcast stations
Up to 30 FM stations and 15 AM stations can be memorized. 
2 methods are available for this.
Auto Memory
Memorizing broadcast 
stations automatically, 
starting with the 
frequency memorized 
fi rst and memorizing 
the upper stations. You can select either the 
minimum frequency level or any 
frequency level as a memory 
starting position.
1.  Press [FM] or [AM].
To start memorizing from 
an arbitrary frequency, 
adjust to the frequency level 
beforehand.
2. Press [PROGRAM].
3. Press [e,  r] to select the 
“Auto Memory” and press 
[OK].
4. Press [e,  r] to select the 
“Minimum Frequency” or 
“Current Frequency” and 
press [OK].
The Auto memory starts. 
When it fi  nishes, the unit 
receives the broadcast station 
last memorized. •
Registering preset 
channels
Memorizing your 
favorite broadcast 
stations manually 1.  Receive the broadcast 
station to memorize. (¼P12)The monaural setting 
(¼right) can be registered 
for FM.
2. Press [PROGRAM].
3. Press [e,  r] to select 
“Register/Delete Preset” and 
press [OK].
4. Press [e,  r] to select the 
channel and press [OK]. •
Listening to the channel memorized 
beforehand
Preset Tuning 1.  Press [FM] or [AM].
2.  Press [PLAY MODE] to 
select “Preset Tuning”.
3. Press [u/t,  y/i] to 
select the channel. You can also select with the 
numbered buttons.
Also, you can press 
[SELECT TRACKS], press 
[e, r] to select the channel 
and press [OK].
•
•
„
„
To cancel the memorized broadcast stations1. Press [PROGRAM].
2. Press [e, r] to select “Register/Delete Preset” and press 
[OK].
3. Press [e, r] to select the channel to delete and press  [DEL].
The message for deletion appears.
If noise is excessive when receiving FM stereo 
signals
1. Press and hold [PLAY MODE] approx. 2 seconds or more  to select “Mono”.
Each time you press and hold
Auto (Stereo)   Mono
“Mono” is displayed.
When the reception frequency is changed with the manual 
tuning, the setting returns to “Auto (Stereo)”. Normally, set 
“Auto (Stereo)”.
If noise is excessive when receiving AM 
broadcast signals (BP: Beat-proof)
1. Press [PROGRAM].
2. Press [e, r] to select “Beat-proof ”.
3. Press [w, q] to select the least noisy setting among “BP1”  to “BP4”.
4. Press [
 RETURN] to return to the standard screen.
Keep distance as far as possible among the AM loop 
antenna, AC adaptor and the main unit.
When radio reception is poorUse an outdoor antenna if radio reception is poor.
FM outdoor antenna (using a television antenna)
Remove the included FM indoor antenna.
Connect a coaxial cable (commercially available) (A) to 
the FM antenna terminal (B) of this unit and TV antenna 
terminal (Type F) (C).
A
B
C
If the reception is still poor with the above connection, 
an FM dedicated antenna (commercially available) or 
a booster (amplifi er, commercially available) may be 
necessary. Consult your dealer for details.
„
•
„
•
„
•
„
Listening to an iPod / Listening to the radio
325[email protected]@1JOEE


 325[email protected]@1JOEE


 






 
						

							14
RQT9522
Setting the sound quality/
sound fi eld, etc.
Changing the sound quality/sound fi  eld
1. Press [SOUND].
2. Press [e, r] to select the 
effect (¼below), and press 
[w,  q] to select a setting.
When [
 RETURN] is pressed, 
the standard screen is restored.
Sound Settings
Equalizer
Bass
Treble
Surround
D.BASS
Sound setting itemsFactory settings are indicated with underlines.
Equalizer
You can select the 
sound quality for your 
preference according 
to audio sources. Manual
Adjusts the level of high range 
and low range separately. 
(¼below)
Flat
When the sound quality effect is 
not used
Heavy
Adds punch to rock
Clear
Clarifi
 es higher range for jazz
Soft
For background music
Vocal
Adds gloss to vocal
When “Manual” is selected
Press [e, r] to select “Bass” 
(Low range) or “Treble” (High 
range) and press [w, q] to select 
the level (-4 to +4).
Surround
You can enjoy broader 
sounds. On / Off
D.BASS
You can enjoy rich 
bass sounds. On / Off
This effect may be less achieved 
according to the sound sources 
for playback.
•
Muting the volume
Press [MUTE].
Press again to resume.
This is also canceled by adjusting 
the volume or operating the 
power source.
•
„
Selecting photos to view
You can play back photos on the SD, CD or in the internal 
memory.
To view photos in the internal memory, make copies of 
those photos beforehand. (¼P16)
Playable photos (JPEG) ¼P5
When inserting the SD card or CD containing photo 
fi les
The photo playback menu 
appears.
Press [e,  r] to select the menu 
and press [OK]. View Most Recent Photos
(Only for the SD)
SD Card MenuView Most Recent PhotosSelect Photo to View
Copy Photo
Cancel
Select Photo to View (¼below, P15)
Copy Photo (¼P16)
If “Cancel” is selected, the standard screen is restored.
•
The following explains the method of how to select and play 
photos among all photos on the all selected media when the 
SD or CD is already inserted.
1.  Press [PHOTO MEDIA] to  select “Internal  Memory”, 
“SD” or “CD”.
Each time you press, the media 
is switched.You can also use [e, r].
•Select Photo MediaInternal Memory
SD
CD
2.  Press [SELECT PHOTOS].
3. Press [e,  r] to select “All 
Photos” and press [OK].
Internal Memory Photo Selection MenuAll Photos
Recently Imported Photos
Date Search
Folder Search
4. Press [e,  r, w, q] to select 
the photo and press [OK].
The photo is displayed.
Performing the slideshowPress [SLIDE SHOW] or [OK].
The slideshow starts with the displayed photo. When [OK] is pressed again, the single view is restored.
You can set the order, effect and interval of slideshow. 
(¼P17)
NoteDisplaying photos may take time. Displaying photos on 
a CD in particular may take several tens of seconds. 
Because of this, the photos may be displayed later than 
the slideshow interval (¼P17). 
Slideshows of the internal memory and SD card are 
repeatedly played back.
•
•
„
•
•
•
•
325[email protected]@1JOEE


 325[email protected]@1JOEE










 
						

							15
RQT9522
Operations
Operations during photo playback
Selecting photos from 
the thumbnail¼1 view1. Press [
 RETURN]. 
The photo thumbnail screen 
appears.
2. Press [e, r, w, q] to select  photos and press [OK].
Scrolling photos (Only for the SD/internal 
memory)
Press and hold [w, q].
When you release your fi  nger, 
scrolling stops and the photo 
displayed in the center is 
displayed with the single view.
The thumbnail screen can be 
scrolled as well.
•
•
Zooming pictures
Press [ZOOM (PHOTO)].
Each time you press
×1 ˆ ×1.5 ˆ ×2
While zoomed, you can move 
to preferred position using 
[e, r, w, q].
•
Rotating pictures Press [ROTATE (PHOTO)].
Each time you press, the photo 
rotates anticlockwise by 90°.
•
Viewing photo 
information Press [INFO (PHOTO)].
The fi  le name, number of pixels, 
date of capture, etc. of photo 
are displayed.
When the scroll bar is displayed, 
you can move across the screen 
using [e, r].
To return to the original screen, 
press [
 RETURN].
•
•
•
¼1 Thumbnail is a reduced image of multiple pictures to view 
them as a list.
NoteIf some images cannot be displayed with the thumbnail 
view, “  ” is displayed. Also, depending on the photo or 
media, the scrolling thumbnail images may be displayed 
as “   ”.
Scrolling is not possible during the random playback of 
photos. Also, you cannot return to the previous photo even 
if you press [w].
When the photo is zoomed or its information is displayed 
during the slideshow, if the previous screen is not restored, 
the screen is not switched to the next photo.
When the display part is opened during the slideshow 
playback, the slideshow is paused.
If the unit is turned off or media are removed, the image 
rotation setting for SD/CD is canceled.
„
•
•
•
•
•
Viewing categorized photos
1.  Press [PHOTO MEDIA] to select “Internal  Memory”, “SD”  or “CD”.
2.  Press [SELECT PHOTOS].
3. Press [e,  r] to select the photo categories 
(¼below) and press [OK]. The type of category differs depending on the 
media.
•
4.  Select photos according to the on-screen  instructions.
Photo categories
All Photos  (¼P14)
Recently Imported 
Photos (Only for the internal memory)
Select from photos imported to 
the internal memory recently.
Photos directly copied from a 
computer are not included.
•
Date Search (Only for the SD/internal 
memory)
Photos are selected by date.
Folder Search Select from the folder.
SD Favorite 
(1 to 10)
¼2
(Only for the SD)
Select from photos registered as 
“Favorite” on the Panasonic digital 
camera LUMIX, etc.
LUMIX: SD Favorite 4 For details on how to register 
“Favorite” on the LUMIX, etc., 
see those operating instructions.
•
Favorite (1 to 3) (Only for the internal memory)
Select from photos registered as 
“Favorite” on this unit. (¼P16)
¼2 Displayed only if photos are present.
NoteThe slideshow is performed only within the selected 
category.
The “SD Favorite” is classifi
 ed based on the DPOF setting 
information, which means the Favorite set on units other 
than Panasonic products may not be classifi  ed as “SD 
Favorite”.
A date for Date Search can be selected from January 2000 
to December 2099.
„
•
•
•
Setting the sound quality/sound fi  eld, etc. / Selecting photos to view
325[email protected]@1JOEE


 325[email protected]@1JOEE


 






 
						

							16
RQT9522
Editing photos
Copying photos
You can copy photos from the SD or CD to the internal 
memory (4 GB).Select the photo category. (¼P15)
Stop audio beforehand.
1.  Press [MENU (PHOTO)].Photo MenuCopy Photo
Edit Photo
Photo Playback Settings2. Press [e,  r] to select “Copy 
Photo” and press [OK].
3. Press [e,  r] to select “Import 
from SD” or “Import from CD” 
and press [OK].
Copy PhotoImport from SD
Import from CD
Compression when Importing
4. Press [e,  r, w, q] to select the photo and press 
[OK].  is displayed on the selected photos. To cancel, 
press [OK] again. If you press [MENU (PHOTO)], you can select 
“Select All” or “Clear All” of photos, or switch to 
single view.
•
5.  Press [MENU (PHOTO)], press [e,  r] to select 
“Copy” and press [OK].
6. Press [w, q] to select “Yes” and press [OK].
To stop copying
Press [ RETURN].
Photos already copied remain in the internal memory.
Compressing data 
when imported The number of photos that can be 
copied can be increased.
Factory setting: Off
1. Press [MENU (PHOTO)].
2. Press [e, r] to select “Copy 
Photo” and press [OK].
3. Press [e, r] to select  “Compression when Importing”.
4. Press [w, q] to select “On”.
NoteIf copied, the fi  le names and folder names of photo are 
named as below. 
Example: If copied on August 24, 2009 
Folder name: 090824_1 
File name: 08240001.JPG
The size of the compressed photo cannot be recovered to 
the original data size.
If you open the display while copying from CD to the 
internal memory, the copy is interrupted. (Photos already 
copied remain in the internal memory.)
Even if photos are set to Favorite or protected, the 
information is not copied.
Due to the restriction of the fi  le system, the displayed 
internal memory capacity does not accord to the amount 
of fi  le data that can be copied.
Backing up the photos in the internal memory to the SD 
card ¼P18
Copying photos from a computer ¼P20
•
•
•
•
„
•
•
•
•
•
•
Registering the photo as “Favorite”
(Only for the internal memory)
Photos can be registered with any of “Favorite (1 to 3)”.
Select “Internal Memory” among photo media. (¼P14)
Select the photo category. (¼P15)
Stop audio beforehand.
1.  Press [MENU (PHOTO)].Photo MenuCopy Photo
Edit Photo
Photo Playback Settings2. Press [e,  r] to select “Edit 
Photo” and press [OK]. 
3. Press [e,  r] to select “Edit 
Favorites” and press [OK].
Edit Photo Edit Favorites
Reset Favorites
Delete Files
Set Protection
4. Press [e,  r] to select 
“Favorite 1”, “Favorite 2” or 
“Favorite 3” and press [OK].Favorite 1
Favorite 2
Favorite 3
5. Press [e,  r, w, q] to select the photo and press 
[OK].  is displayed on the selected photo (If it is 
“Favorite 1”). To cancel, press [OK] again. If you press [MENU (PHOTO)], you can select 
“Select All” or “Clear All” of photos, or switch to 
single view.
•
6.  Press [MENU (PHOTO)], press [e,  r] to select 
“End Editing of Favorites” and press [OK].
Viewing registered 
photos See “Viewing categorized photos” 
(¼P15)
Resetting the 
registration 1. Press [MENU (PHOTO)].
2. Press [e, r] to select “Edit 
Photo” and press [OK].
3. Press [e, r] to select “Reset  Favorites” and press [OK].
4. Press [e, r] to select Favorite  to reset and press [OK].
5. Press [w,  q] to select “Yes” and 
press [OK].
NoteUp to 999 photos can be registered with “Favorite (1 to 3)” 
respectively.
Some photos may not be registered.
•
•
•
•
•
325[email protected]@1JOEE


 325[email protected]@1JOEE










 
						

							17
RQT9522
Operations
Deleting photos
(Only for the internal memory)Select “Internal Memory” among photo media. (¼P14)
Select the photo category. (¼P15)
Stop audio beforehand.
1.  Press [MENU (PHOTO)].
2. Press [e,  r] to select “Edit Photo” and press 
[OK].
3. Press [e,  r] to select “Delete Files” and press 
[OK].
4. Press [e,  r, w, q] to select the photo and press 
[OK].
 is displayed on the selected photos. To cancel, 
press [OK] again. If you press [MENU (PHOTO)], you can select 
“Select All” or “Clear All” of photos, or switch to 
single view.
•
5.  Press [MENU (PHOTO)], press [e,  r] to select 
“Delete” and press [OK].
6. Press [w,  q] to select “Yes” and press [OK].
NoteThe deleted photos cannot be recovered.
To delete completely, perform “Format Internal Memory”. 
(¼P18)
Protecting photos
(Only for the internal memory)
You can protect photos to prevent them from being deleted 
by mistake.
Select “Internal Memory” among photo media. (¼P14)
Select the photo category. (¼P15)
Stop audio beforehand.
1.  Press [MENU (PHOTO)].
2. Press [e,  r] to select “Edit Photo” and press 
[OK].
3. Press [e,  r] to select “Set Protection” and press 
[OK].
4. Press [e,  r, w, q] to select the photo and press 
[OK].
 is displayed on the selected photos. To cancel, 
press [OK] again. If you press [MENU (PHOTO)], you can select 
“Select All” or “Clear All” of photos, or switch to 
single view.
•
5.  Press [MENU (PHOTO)], press [e,  r] to select 
“End Protection Setting” and press [OK].
NoteEven if protection is set to photos, they can be deleted if 
the internal memory is formatted.
•
•
•
•
•
•
•
•
•
Photo playback settings
Basic operation
1.  Press [MENU (PHOTO)].Photo MenuCopy Photo
Edit Photo
Photo Playback Settings2. Press [e, 
r] to select “Photo 
Playback Settings” and press 
[OK].
3. Press [e,  r] to select the item (¼below).
4. Press [w,  q] to select the setting.
To return to the standard screen, press [
 RETURN] a 
few times.
Setting items for photo playbackFactory settings are indicated with underlines.
Date Indication On / Off
Color Effects Color/Black and White/Sepia
When photos are displayed with the 
thumbnail view, they are displayed 
with the original color tone.•
Slideshow OrderNormal:
Plays in the order of fi
 le names.
Random:
Photos in the category are played 
at random. The settings are saved even 
if the unit is turned off or the 
media is switched.
•
Slideshow Effects Fade:
The next photo is gradually displayed 
and played while switching photos.
Motion:Plays while enlarging and moving 
the photo up and down, right and 
left, and in the diagonal direction.
Slide-in:Plays switching photos with fl
 owing 
movement from right to left.
When “Motion” is set, the 
“Slideshow Interval” setting is 
disabled.
•
Slideshow Interval 5 sec/10 sec/30 sec/
5 min/10 min/30 min/
1 hour/3 hours/12 hours/24 hoursChange On The Hour:
Photos are switched on the hour 
every hour.
Change Daily:
Photos are switched when the 
calendar date is changed.
Sync Music:
Photos are switched every time 
the CD/iPod track is switched.
If [u/t, y/i] is pressed 
and skipped, photos are switched 
as well. (Not switched while 
stopped or paused.)
When the slideshow playback is 
performed for the small number 
of photos with a short interval, 
the photos may not be normally 
displayed.
•
„
„
Editing photos / Photo playback settings
325[email protected]@1JOEE


 325[email protected]@1JOEE










 
						

							18
RQT9522
Using the setup menu
Basic operation
1. Press [SETUP].Settings MenuImage Quality Settings
Clock/Calendar Settings
Demo Mode
Remote Control Mode
2. Press [e,  r] to select the 
item (¼below) and press 
[OK].
3.  Make the setting according to the on-screen  instructions.
To return to the standard screen, press [
 RETURN] a 
few times.
Setting itemsFactory settings are indicated with underlines.
Image Quality 
Settings Select “Image Quality Mode” or 
“Adjust Brightness” in step 3 in 
the basic operation. And then 
make each setting.
Image Quality Mode
Standard:
Standard image quality
Soft:
Eye-friendly image quality
Dynamic:
Vivid image quality with clear 
distinction of bright and dark Adjust Brightness
(Only when Dimmer is “Off ”)
Brightness is adjusted with the 
range from “1” to “10”. The default 
setting is “10”. „
„
Clock/Calendar 
Settings Select Design ¼P9
Set Clock ¼P9
Set Date Indication:
Select Month/Day/Year or Day/
Month/Year.
Set Clock Indication:
Select “12-hour System” or 
“24-hour System”.
Demo Mode Disable/Enable
For the Demo function ¼P8
Remote Control 
Mode Change the remote control mode 
of this unit and remote control 
when malfunction occurs on 
this unit while using the remote 
control of other devices.
Example: When setting the 
remote control mode to 2
1. Select “Remote Control 2” in 
step 3 in the basic operation 
and press [OK].
2. 
Press and hold [OK] on the 
remote control without aiming it 
at this unit, and press and hold 
the numbered button [2] for more 
than 2 seconds.
3.
 Press [OK].
Initialize Settings This unit’s settings are returned to 
the factory defaults.
1. Select “Yes” in step 3 in the 
basic operation and press [OK].
2. Select “Yes” again and press  [OK].
The clock setting and photo fi  les 
in the internal memory remain 
the same.
•
„
„
Format Card 1. Select “Yes” in step 3 in the 
basic operation and press [OK].
2. Select “Yes” again and press  [OK].
All the data on the SD card is 
deleted.
•
Back Up Internal 
Memory Photo data in the internal memory 
is backed up to the SD card.
Select “Yes” in step 3 in the basic 
operation and press [OK].
If [
 RETURN] is pressed 
during backup and stopped, 
photo data already backed up 
remains on the SD card.
The “Favorite” settings, rotation 
or protection information of 
photos cannot be backed up.
Backup time will be longer 
depending on the number 
of photos to be saved or the 
amount of data. (Approx. 
10 minutes per 1000 fi  les)
•
•
•
Format Internal 
Memory 1. Select “Yes” in step 3 in the 
basic operation and press [OK].
2. Select “Yes” again and press  [OK].
Protected photos are also 
deleted.
Even if you format the internal 
memory or delete all photos 
(¼P17), the size of used area 
of the internal memory will not 
become zero since the system 
uses some area.
•
•
System Software Info You can confi
 rm the system 
software information (version) of 
this unit. For the latest version of 
information, see the following 
homepage.
http://panasonic.jp/support/global/
cs/audio/ •
Update System 
Software This is a function when updating 
the system software is necessary 
in the future to improve the 
performance.
Please make sure to complete 
user registration which is 
necessary to receive information 
related to the system software 
update.
For details, see the following 
homepage.
http://panasonic.jp/support/global/
cs/audio/
Changing the dimmer
Press [DIMMER].
Each time you press the button:
Off (normal)   On
Factory setting: Off
The setting is saved even if the unit is turned off.
•
•
325[email protected]@1JOEE


 325[email protected]@1JOEE










 
						

							19
RQT9522
Operations
Using the timer
Photos or audio are automatically played at the set time.
“Timer 1”, “Timer 2” and “Timer 3” can be set.Set the clock beforehand (¼P9)
To listen to the radio, tune in to channels beforehand.
In the timer setting, set only audio source and volume for audio playback. For Random, Repeat play, etc. make the settings 
before the timer playback starts.
•
•
To return to the previous screenPress [ RETURN].
To return to the timer setting menu
Press [zTIMER].
To disable the set timerSelect “Disable This Timer” in step 
3 -2 and press [OK].
To delete the timer setting
Select “Initialize This Timer” in step  3 -2 and press [OK].
When the timer is setWhen the unit is turned on, if the audio playback is “On”, 
“z” is displayed one minute before the timer start time.
At the timer start time, the sound is faded in to the set 
volume and the audio is played back. (z blinks)
„
„
„
„
•
•
NoteThe timer operates at the set time unless you set it to 
“Disable”.
The timer less than 10 minutes may not be displayed on 
the timer setting screen. (When the audio playback is “On”, 
only “ 
 ” is displayed.)
When the Setup Menu, etc. is displayed, audio playback 
with the timer does not start.
Audio playback with the timer may not start if the audio 
media selected for “Audio Playback” is the same as the 
one selected when the timer starts. During CD playback, pause or search
During iPod playback or search
When the radio frequency being received is the same, 
and the Auto/Monaural setting is the same
•
•
•
•
–
–
–
Using the setup menu / Changing the dimmer / Using the timer
The following explains the case when setting “Timer 1” as 
an example.
1. Press [zTIMER].
Timer Setting Menu
Timer 1 SettingsTimer
3
AM12 6 9SunM
2. Press [w,  q] to select “Timer 
1 Settings” and press [OK].
3.  Set the standby setting to  Enable.
1. Press [e, r] to select “Standby” and press [OK].
2. Press [e, r] to select  “Enable This Timer” and 
press [OK].
Timer 1 SettingsStandby
Day
TimeEnable
Unset
12:00 A
4.  Set the day. 1. Press [e, r] to select “Day” and press [OK].
2. Press [e, r] to select the  day, add the check mark with 
[w, q] and press [OK].Timer 1 Day Settings
Sunday
Monday
Tuesday
Wednesday
Thursday
5.  Set the time. 1. Press [e, r] to select “Time” and press [OK].
2. Press [w, q, e, r] to set  the start/end time and press 
[OK].

·7/É00AM/É
·800AM
Start Time End Time
You can also use the numbered buttons.
e.g.) 9:  [0]  ˆ [9]
 10: [1]  ˆ [0]
•
6.  Select Audio Playback ON/ OFF.
1. Press [e, r] to select “Audio Playback” and press [OK].
2. Press [e, r] to select “Audio  Playback”, press [w, q] to 
select “On” or “Off ”.
Timer 1 Audio Settings
Source: CD 
Audio PlaybackPlayback TimeUpdate Source/Volume
On  30 minutes
Only when audio playback is set
7. Press [e,  r] to select 
“Playback Time” and press 
[w,  q] to select the playback 
time.
10 minutes/30 minutes/1 hour/
2 hours/3 hours/No Limit
Timer 1 Audio SettingsAudio PlaybackPlayback TimeUpdate Source/Volume
On1 hour
Source: CD 
8. Press [e,  r] to select 
“Update Source/Volume” and 
press [OK].
Source:CD
Volume:25 
Playback TimeUpdate Source/Volume1 hour
Confirm
The sound source and volume are displayed. When you do not change, press [w, q] to select 
“No” and press [OK].
When you change, make the setting using the 
audio selection button or volume button, press 
[w, q] to select “Yes” and press [OK].
As a test, the sound source can be played.
•
•
9. Press [e,  r] to select “Confi  rm” and press [OK].
10. Press  [e,  r] to select “Confi  rm” and press [OK].
If the operation time overlaps other timer settings, the 
confi  rmation message appears.
If “Yes” is selected, other timers with the overlapped 
time are disabled.
If “No” is selected, the original screen is restored with 
the contents of timer setting reserved.
•
•
11. Press  [
 RETURN].
The standard screen is restored.
325[email protected]@1JOEE


 325[email protected]@1JOEE


 






 
						

							20
RQT9522
Using with your PC
Installation of this unit
Photo fi les can be exchanged among this unit’s internal 
memory, SD and computer.
Do not use any other cables except a genuine Panasonic 
USB connection cable (K2KZ4CB00015; optional).
System confi  gurations required
OS for PC Windows Vista
®
Windows® XP
Mac OS X
Por t USB port
•
•
•
•
Turn the unit off beforehand.
Start up the computer beforehand.
1. Confi  rm the direction of the USB connection 
cable (optional) and insert it to the USB port of 
this unit.
2.  Insert the USB connection cable to the computer.
3.  Turn this unit on.
4. Press [e,  r] to select the USB connection 
memory (“Internal Memory” or “SD Card”) and 
press [OK].
This unit functions as a reader/writer and is 
recognised as an external device of computer.
To remove the USB connection cableDouble-click the icon (Windows XP: , Windows Vista: ) 
on the task tray of computer and remove it according to the 
on-screen instruction. (The above may not be displayed 
depending on the OS setting. In this case, make sure to 
confi  rm that the message indicating communication is in 
process is not displayed on this unit’s display, and then 
remove the cable.) For Macintosh, follow the removal method for Mac OS 
device.
To switch the USB connection memoryRemove the USB connection cable once, then reconnect it 
and perform the above steps 3 and 4.
To exchange photo fi  les with a computer1. Open the folder to exchange photo fi  les on the computer.
2. Perform the above steps 1 to 4.
3. Open this unit’s drive icon in “My Computer” or  “Computer” of your PC.For Macintosh, this unit’s drive is displayed on the 
desktop.
4. Open the photo folder on this unit.
5. Exchange  fi les between the folders.
Folders and fi  les can be dragged and dropped.
NoteIf you remove and insert the USB connection cable or SD 
card while “Accessing. Do not remove the card or cable.” 
message is displayed, the data on the SD card may be lost 
or damaged.
•
•
„
•
„
„
•
•
•
When installing the unit on the table, etc., make sure the 
display part does not protrude from the table when it is 
opened. The unit may fall down and drop.
To  
fi x the unit
When installing the unit on the table with narrow depth, use 
the included fall-prevention belt to fi  x the unit to the wall or 
pillar. (The following illustration is a setting example.)
A Wall, pillar, etc.
B Fall-prevention belt (included)
C Wood screw (included) (Black), etc.
D Bottom face of this unit
E Screw for fall-prevention belt (included) (Silver)
A
C B
E
D
NoteBe sure to use the screw for fall-prevention belt to attach to 
the bottom face of this unit.
If you tighten the screw for fall-prevention belt too tightly, it 
goes around in circle and cannot be fi
 xed.
Keep the screws out of reach of children to prevent 
swallowing.
•
•
• You cannot operate this unit while connecting with the 
computer.
If the USB connection cable is removed, this unit is turned 
off.
Data exchange with iPod is not possible.
If you make multiple USB connections or use hubs with 1 
computer, malfunction may occur.
If you are using the 10.2 or older version of Mac OS X, 
set the write-protect switch of SDHC memory card to the 
“LOCK” side when importing photos from the SDHC card 
to the computer.
When this unit is connected, do not use the format function 
of the computer to format this unit’s internal memory or SD 
card.
Operations are not necessarily guaranteed for all 
computers.
•
•
•
•
•
•
•
325[email protected]@1JOEE


 325[email protected]@1JOEE