Panasonic Multi Purpose Camera Ak Hc1800n Operating Instructions

							
- 61 -

 SETTING menu
[7] INTELLIGENT SET
ATW WIDTH [1 to 5]
The color temperature range (1 to 5) used for 
tracking ATW is set here.
With D5600K OFF, the range is set centering 
on 200K or so; with D5600K ON, it is set 
centering on 5600K or so.
The general color temperature tracking 
ranges are listed in the table below.
ATW WIDTHD5600K OFFD5600K ON
1Approx. 
000K to 000KApprox. 
500K to 7000K
2Approx. 2500K to 5000KApprox. 
000K to 8000K
3Approx. 
200K to 8000KApprox. 2500K to 9500K
4Approx. 1900K to 10000KApprox. 
200K to 10500K
5Approx. 1600K to 11000KApprox. 1600K to 11000K
IRIS ON LOCK
[LOCK, MANUAL, PANEL]
The IRIS operation status when the intelligent 
functions are locked is selected here. LOCK:    The iris is held in the lock start 
status.
MANUAL:    The iris is switched to manual 
operation.
PANEL:    Control that is exercised from 
the camera controller switches 
the iris operation between 
IRIS AUTO and MANUAL.
Setting of menu items 
						

							
- 62 -

 CAMERA ID menu
An ID of not more than 10 characters 
consisting of alphanumerics, symbols and 
spaces can be set for the camera.
The camera ID is displayed at all times when 
ON is selected in the CAM ID mode but 
displayed only when color bar signals are 
output in the BAR mode.
The status for setting the ID is established 
by moving the cursor above the colon (:) and 
selecting it.
Move the cursor to the positions of the 
characters to be set, select the characters 
and enter them.
Characters which can be entered:
Spaces, upper-case letters (A to Z), numbers 
(0 to 9), and symbols (' , >, 
						

							
- 6 -

 FILE OPERATION menu
MODE [LOAD/STORE]
Select LOAD when settings are to be loaded 
from a file; select STORE when the current 
settings are to be saved in a file.
LOAD/STORE FROM
For selecting the LOAD or STORE 
destination.
PRESET, USER1 or USER2 can be selected 
as the LOAD destination when LOAD has 
been selected; USER1 or USER2 can be 
selected as the STORE destination when 
STORE has been selected.
EXECUTE
When EXECUTE is selected, the 
“LOAD OK?” or “STORE OK?” message is 
displayed.
LOAD or STORE is executed when NO is 
switched to YES and the ENTER operation is 
performed.
“COMPLETE” is displayed after the data has 
been loaded or stored.
Setting of menu items 
						

							
- 6 -

Menu list
Scene file items indicated by “”MAINTENANCE1.BLACK SHADINGDETECTIONCORRECT(DIG)2.PEDESTAL, GAMMAM PEDESTALR PEDESTALB PEDESTALM GAMMAR GAMMAB GAMMAM BLACK GAMMAR BLACK GAMMAB BLACK GAMMAGAMMABLACK GAMMAEFFECT DEPTHDRSCINE GAMMA SELECTBLACK STR.LEVELDYNAMIC LEVEL
.FLARER FLAREG FLAREB FLAREFLARE
.KNEE, WHITE CLIPM KNEE POINTR KNEE POINTB KNEE POINTM KNEE SLOPER KNEE SLOPEB KNEE SLOPEA.KNEE POINTA.KNEE LEVELM WHITE CLIP LVLR WHITE CLIP LVLB WHITE CLIP LVLKNEEWHITE CLIPHIGH COLOR5.R/B GAINR GAINB GAINND FILTER6.DETAILDETAILTOTAL DTL LEVELH DTL LEVELCRISPLEVEL DEPENDENTPEAK FREQUENCYKNEE APERTUREKNEE APE LEVEL
Setting of menu items 
						

							
- 65 -

Scene file items indicated by “”MAINTENANCE6.DETAILSLIM DETAILDETAIL(+)DETAIL(–)DETAIL CLIPDETAIL SOURCE7.SKIN TONE DTLSKIN TONE DTLSKIN GETSKIN DTL CORINGY MAXY MINI CENTERI WIDTHQ WIDTHQ PHASE8.GAIN,AUTO IRISLOW GAINMID GAINHIGH GAINA.IRIS LEVELA.IRIS PEAK/AVEA.IRIS WINDOWIRIS MODEIRIS GAIN9.S.GAINMODETOTAL GAINGAINPIX MIXV MIXFRAME MIXH DETAIL LEVELCRISPLEVEL DEPENDENTPEAK FREQUENCYM GAMMAM PED OFFSETR PED OFFSETB PED OFFSET10.FRAME MODESCAN REVERSE11.MATRIXMATRIX TABLEMATRIX R-GMATRIX R-BMATRIX G-RMATRIX G-BMATRIX B-RMATRIX B-G
Setting of menu items 
						

							
- 66 -

Setting of menu items
Scene file items indicated by “”MAINTENANCE12. COLOR CORRECTIONR   SAT/PHASEMg  SAT/PHASEB   SAT/PHASECy  SAT/PHASEG  SAT/PHASEYl  SAT/PHASER_Mg SAT/PHASEMg_B SAT/PHASEB_Cy SAT/PHASECy_G SAT/PHASEG_Yl SAT/PHASEYl_R SAT/PHASESETTING1.MODED5600KLIGHTINGGAIN SELECTCAM IDCAM ID POSIMATRIX TABLECOLOR CORRECTIONDIGITAL EXTENDERBAR SELFORMATSTATUSMENU ON BARMENU SELFAN2.SHUTTERSHUTTER MODESHUTTER SPEEDSYNCHRO SCAN
.GEN-LOCKGEN-LOCK INPUTH PHASE-COARSEH PHASE-FINESD-HD PHASE CRSSD-HD PHASE FINE
.PROTOCOLPROTOCOL 
						

							
- 67 -

Setting of menu items
Scene file items indicated by “”SETTING5.INTELLIGENT16.INTELLIGENT2INTELLIGENTINTELLIGENT MODEND FILTER SELECTAGC SPEEDAGC GAIN STEPHI LIGHT DETECTIRIS RANGEATW AREAATW SPEEDD5600KAGC MODEAGC MAX GAINPIX MIXV MIXFRAME MIXSUB MENU7.INTELLIGENT SETINTELLIGENTATW WIDTHIRIS ON LOCKCAMERA IDID:
When a scene file is loaded, there may be inconsistencies in some of the items between 
the status of the connected controller and the status of the camera.
When the controller is operated in this status, the status of the controller will be reflected. 
						

							
- 68 -

Appearance
3-9/16 (90)
6-5/16 (160)
15/32(12)
17/32(13.2)
4-5/8 (117)
Unit: inch (mm)
1-3/4 (44.5) 
						

							
- 69 -

Specifications
Source voltage: 12 V DC
Power consumption:  17 W indicates safety information.
Image pickup device:  2/˝ 2.2 million-pixel IT, CCD  
System:   GBR image pickup system
Resolving optical system:  F1. prism
Optical filter:   ND; CLEAR, 1/, 1/16, 1/6
Lens mount:  Bayonet type
Output format:  1080/59.9i
Sensitivity:  F10, 2000Ix, 200K, white reflection rate 89.9 %
S/N:  60 dB typ.
Ambient operating temperature: 
  +2 °F to +10 °F (0 °C to +0 °C)
Storage temperature: – °F to +10 °F (–20 °C to +60 °C)
Weight:   Approx. . lbs. (1.5 kg)
Dimensions (W  H  D):   -9/16”  -5/8”  6-5/16” (90  117  160 mm) 
(excluding protrusions)
Input/output signal
Video output:  HD SDI (BNC 1 system)
SYNC input:  SYNC input (GL input  value SYNC/BB)
Camera connector:  D-SUB 15-pin connector seat (JAE: D02-M15SAG-20L9E)
Control system:  Synchronous (EIA-22)
Lens connector 1:  Iris control (HIROSE: HR10A-10R12SC)
Lens connector 2:  Zoom, focus control (HIROSE: HR10A-10R12PC)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice. 
						

							
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA
Headquarters:
 Panasonic Way E-7, Secaucus, NJ 0709   (201) 8-500
EASTERN ZONE: 
 Panasonic Way E-7, Secaucus, NJ 0709   (201) 8-7196
WESTERN ZONE: 
0 Cahuenga Blvd. West, Los Angeles, CA 90068   (2) 8-608
Government office:
(201) 8-7587
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (PST) (800) -881/2 Hr. Fax (800) -880
Emergency after hour parts orders (800) -881
TECHNICAL SUPPORT:
Emergency 2 Hour Service (800) 222-071
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario LW 2T   (905) 62-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 0100 Mexico, D.F. (52) 1 951 2127
Panasonic Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 0060 
(787) 750-00
© 2008 Matsushita Electric Industrial Co., Ltd.  All rights reserved.
  F0208S0 DP