Panasonic Multi Purpose Camera Ak Hc1500g Operating Instructions

- 20 (E) -
ENGLISH

Setting of menu items
DETECTION [READY, ACTIVE]
For automatically correcting the black shading. 
CORRECT(DIG) [OFF, ON]
For ON/OFF control of the detection correction.
 MAINTENANCE menu
   MAINTENANCE   1.BLACK SHADING   2.PEDESTAL,GAMMA   3.FLARE   4.KNEE,WHITE CLIP   5.R/B GAIN   6.DETAIL   7.SKIN TONE DETAIL   8.GAIN,AUTO IRIS   9.SUPER GAIN  10.FRAME MODE  11.MATRIX  12.COLOR CORRECTION
� �
 ����BLACK SHADING ��    DETECTION  CORRECT(DIG)     :ON
[1] BLACK SHADING 

- 21 (E) -

Setting of menu items
 MAINTENANCE menu
 �����PEDESTAL,GAMMA(1/2)  ��    M PEDESTAL        :+000  R PEDESTAL        :+000  B PEDESTAL        :+000  M GAMMA           :0.45  R GAMMA           :+00  B GAMMA           :+00  M BLACK GAMMA     :+00  R BLACK GAMMA     :+00  B BLACK GAMMA     :+00  GAMMA             :ON  BLACK GAMMA       :ON
M PEDESTAL [–200 to +200]
For adjusting the black level.
R PEDESTAL [–100 to +100]
For correcting the red in relation to the master 
pedestal.
B PEDESTAL...

- 22 (E) -
ENGLISH

Setting of menu items
B BLACK GAMMA [–15 to +15]
For adjusting the gamma characteristics of the 
blue in the vicinity of the black in relation to the 
master gamma characteristics.
GAMMA [OFF, ON]
For turning the gamma correction ON or OFF.
BLACK GAMMA [OFF, ON]
For turning the black gamma correction ON or 
OFF.
When ON has been selected as the DRS 
setting, the BLACK GAMMA setting does not 
take effect.
EFFECT DEPTH [1 to 5]
For selecting the effects of the contrast 
adjustment when...

- 23 (E) -

Setting of menu items
R FLARE [000 to 100]
G FLARE [000 to 100]
B FLARE [000 to 100]
For adjusting the flare correction.
FLARE [OFF, ON]
For turning the flare correction ON or OFF.
 �� FLARE ��    R FLARE          :000  G FLARE          :000  B FLARE          :000  FLARE            :ON
 MAINTENANCE menu
[3] FLARE 

- 24 (E) -
ENGLISH

Setting of menu items
 �� KNEE,WHITE CLIP(1/2) ��    M KNEE POINT     :95.00%  R KNEE POINT     :+00.00%  B KNEE POINT     :+00.00%  M KNEE SLOPE     :50  R KNEE SLOPE     :+00  B KNEE SLOPE     :+00  A.KNEE POINT     :95.00%  A.KNEE LEVEL     :108%  M WHITE CLIP LVL :109%  R WHITE CLIP LVL :+00%  B WHITE CLIP LVL :+00%
 MAINTENANCE menu
M KNEE POINT
[80.00% to 107.00% (VIDEO MENU)]
[30% to 90% (FILM MENU/VIDEO REC)]
For adjusting the knee point.
R KNEE POINT [–25.00% to +25.00%]...

- 25 (E) -

Setting of menu items
A. KNEE POINT [80.00% to 107.00%]
For setting the auto knee break point position.
This setting does not take effect when a setting 
other than AUTO is selected for KNEE or 
ON is selected as the DRS setting when the 
VIDEO MENU has been selected or when the 
FILM MENU has been selected.
A. KNEE LEVEL [100% to 109%]
For setting the maximum level of auto knee.
This setting does not take effect when a setting 
other than AUTO is selected for KNEE or 
ON is selected as the...

- 26 (E) -
ENGLISH

 �� KNEE,WHITE CLIP(2/2) ��    KNEE             :MANUAL  WHITE CLIP       :ON  HIGH COLOR       :OFF

Setting of menu items
 MAINTENANCE menu
[4] KNEE, WHITE CLIPKNEE [OFF, MANUAL, AUTO]
For selecting the knee operation mode.
This setting does not take effect when FILM 
REC is selected.
WHITE CLIP [OFF, ON]
For tuning white clip ON or OFF.
HIGH COLOR  [OFF, ON]
For improving the color reproducibility of the 
high-brightness areas when it is set to ON.
This setting does not take...

- 27 (E) -

Setting of menu items
 �� DETAIL(1/2) ��    DETAIL           :ON  TOTAL DTL LEVEL  :+00  H DTL LEVEL      :11  CRISP            :02  LEVEL DEPENDENT  :2  PEAK FREQUENCY   :10  KNEE APERTURE    :ON  KNEE APE LEVEL   :3
 MAINTENANCE menu
DETAIL [OFF, ON]
For turning all the detail functions ON or OFF.
TOTAL DTL LEVEL [–31 to +31]
For setting the H DTL and V DTL levels.
H DTL LEVEL [0 to 63]
For setting the H DTL level.
CRISP [0 to 31]
For setting the noise elimination level of the 
detail...

- 28 (E) -
ENGLISH

Setting of menu items
SLIM DETAIL [OFF, ON]
For setting the detail more finely at ON.
DETAIL(+) [–31 to +31]
For adjusting the detail gain in the + direction.
DETAIL(–) [–31 to +31]
For adjusting the detail gain in the – direction.
DETAIL CLIP [0 to +63]
For minimizing the glare caused by adding 
too much detail as a result of a detail clip 
adjustment.
DETAIL SOURCE
[(G+R)/2, (G+B)/2, (2G+B+R)/4, (3G+B)/4, 
 
R, G]
For setting the ratio of the RGB signal 
components which create the...

- 29 (E) -

Setting of menu items
 MAINTENANCE menu
 �� SKIN TONE DETAIL ��    SKIN TONE DTL    :OFF  SKIN GET         :OFF  SKIN DTL CORING  :5  Y MAX            :190  Y MIN            :010  I CENTER         :055  I WIDTH          :090  Q WIDTH          :010  Q PHASE          :+000 
SKIN TONE DTL [OFF, ON]
For turning the SKIN TONE DTL ON or OFF.
SKIN GET [OFF, ON]
When ON is selected, the box cursor is output 
to the screen center. When the image of the 
subject’s skin is placed inside the box cursor...