Panasonic Multi Format Camera Ak Hc3500 Operating Instructions

							31
MenuItem Adjustment setting range Initial value Items recorded on SD cards
Setting1 HD-SDI
  OUT MAIN, VF, RET MAIN
HD-SDI
 Power ACTIVE, SAVE ACTIVE
AUX I/O RET 
 Y IN, PMT OUT, VBS OUT, D1 OUT RET Y IN
TRUNK1 RS4
 , RS3C RS4
TRUNK RS4, RS3C RS4
5600K OFF, ON OFF
Setting

 HND GRIP RET A, B, PTT A

HND GRIP PTT PTT, A, B PTT

HND Lens VTR PTT, A, B, VTR B

HND Lens RET A, B A

STD Lens RET1 A, B A

STD Lens RET

 A, B B

EXT RET 1 A, B A

EXT RET 

 A, B B

EXT RET 3 A, B B

Setting3 RET1 ID Enables a name (5 characters) to be set. RET1

RET

 ID Enables a name (5 characters) to be set. RET
 

RET3 ID Enables a name (5 characters) to be set. RET3

RET4 ID Enables a name (5 characters) to be set. RET4

Gain SW LOW –6 dB to 36 dB (in 3 dB increments) 0 dB

Gain SW MID –6 dB to 36 dB (in 3 dB increments) 6 dB

Gain SW High –6 dB to 36 dB (in 3 dB increments) 1
 dB

ID Character Enables a name (10 characters) to be set. — 
Setting4 User SW1 A, B, PTT, DISP, MARK OFF A

User SW

 A, B, PTT, DISP, MARK OFF  PTT

User SW3 A, B, PTT, DISP, MARK OFF  PTT

User B/U A, B, PTT, DISP, MARK OFF, LENS EXT  PTT

Back Light 1 to 70  
 0

RET Mode NORM, TOGGLE, SEQ. NORM

Lens I/F Serial, Analog Analog

B/U Lens BOX, PORTABLE BOX

!LED Gamma Off OFF, ON OFF

Shutter OFF, ON OFF

Extender OFF, ON OFF

MONI OUT OFF, ON OFF

FAN Off OFF, ON OFF

Master Gain OFF, ON OFF

Black Gamma OFF, ON OFF

7"VF VF FAN Speed NORM, LOW NORM

Peak Slice OFF, LOW, MID, HI OFF

Peak FREQ 8 MHz, 15 MHz 8 MHz

INCOM Set.1 INC1 MIC Type DYN, ECM, CBN CBN
INC1 MIC Gain –1
  dB to +1 dB (in 3 dB increments) 0 dB
INC1 MIC Power ON, OFF ON
INC1 Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
INC1 PGM MIX ON, OFF ON
INC1 ENG/PROD ENG, PROD ENG
INC1 to CCU ON, OFF ON
INCOM Set.

 INC MIC Type DYN, ECM, CBN CBN
INC

 MIC Gain –1 dB to +1 dB (in 3 dB increments) 0 dB
INC

 MIC Power ON, OFF ON
INC

 Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
INC

 PGM MIX ON, OFF ON
INC

 ENG/PROD ENG, PROD ENG
CRANE MIC Gain –1
  dB to +1 dB (in 3 dB increments) 0 dB
CRANE Side Tone OFF, 0 dB to –36 dB (in 3 dB increments) OFF
CRANE ENG/PROD ENG, PROD ENG
CRANE to CCU ON, OFF ON
MIC Gain MIC1 Gain 60 dB
, 40 dB, 0 dB 60 dB
MIC1 AMP 
 0 dB to –0 dB (in 1 dB increments) 0 dB
MIC
 Gain 60 dB, 40 dB, 0 dB 60 dB
MIC

 AMP 0 dB to –0 dB (in 1 dB increments) 0 dB
Table of adjustment setting ranges 
						

							3
Table of adjustment setting ranges
Painting
MenuItem Adjustment setting range Initial value
Setting SW Flare ON, OFF ON
Black Gamma ON, OFF OFF
Gamma ON, OFF ON
Knee ON, OFF ON
White Clip ON, OFF OFF
Matrix ON, OFF OFF
Preset Matrix NORM, EBU, NTSC NORM
DTL ON, OFF ON
Skin Tone DTL ON, OFF OFF
DRS SW ON, OFF OFF
BlackShading Correct ON, OFF ON
H SAW R/G/B –100 to +100 0
H PARA R/G/B –100 to +100 0
V SAW R/G/B –100 to +100 0
V PARA R/G/B –100 to +100 0
AUTO V.SAW — —
Black/Gain PED M –800 to +800 0
PED R  –800 to +800 0
PED B –800 to +800 0
Flare OFF, ON ON
Flare G –100 to +100 0
Flare R –100 to +100 0
Flare B –100 to +100 0
Gain G –800 to +800 0
Gain R –800 to +800 0
Gain B –800 to +800 0
White SHD Correct OFF, ON ON
H SAW R/G/B –100 to +100 0
H PARA R/G/B –100 to +100 0
V SAW R/G/B –100 to +100 0
V PARA R/G/B –100 to +100 0
Gamma Gamma ON, OFF ON
Gamma M 0.600 to 0.300 0.450 
Gamma R –75 to +75 0
Gamma B –75 to +75 0
Black Gamma OFF, ON OFF
Black Gamma M –3
  to +3 0
Black Gamma R –
 0 to +0 0
Black Gamma B –
 0 to +0 0
DRS SW OFF, ON OFF
Effect Depth 1 to 5 5
Initial Gain 4.0, 4.5, 5.0 4.5
Knee/W.Clip Knee ON, OFF OFF
Knee Point M 110 % to 80 % 95 %
Knee Point R –
 0 to +0 0
Knee Point B –
 0 to +0 0
Knee Slope M 0 % to 199 % 100 %
Knee Slope R –31 to +31 0
Knee Slope B –31 to +31 0
White Clip OFF, ON OFF
White Clip M 109 % to 80 % 109 %
White Clip R –15 % to +15 % 0
White Clip B –15 % to +15 % 0 
						

							33
MenuItem Adjustment setting range Initial value
Linear Matrix Matrix OFF, ON OFF
Linear OFF, A, B OFF
1

axes OFF, A, B OFF
R-G –31 to +31 0
R-B –31 to +31 0
G-R –31 to +31 0
G-B –31 to +31 0
B-R –31 to +31 0
B-G –31 to +31 0
Color Correct1 Matrix OFF, ON OFF
Linear OFF, A, B OFF
1

axes OFF, A, B
OFF
G Satu –1
 8 to +17 0
G Phase –1
 8 to +17 0
G_Cy Satu –1
 8 to +17 0
G_Cy Phase –1
 8 to +17 0
Cy Satu –1
 8 to +17 0
Cy Phase –1
 8 to +17 0
Cy_B Satu –1
 8 to +17 0
Cy_B Phase –1
 8 to +17 0
B Satu –1
 8 to +17 0
B Phase –1
 8 to +17 0
B_Mg Satu –1
 8 to +17 0
B_Mg Phase –1
 8 to +17 0
Color Correct
 Matrix OFF, ON OFF
Linear OFF, A, B OFF
1

axes OFF, A, B OFF
Mg Satu –1
 8 to +17 0
Mg Phase –1
 8 to +17 0
Mg_R Satu –1
 8 to +17 0
Mg_R Phase –1
 8 to +17 0
R Satu –1
 8 to +17 0
R Phase –1
 8 to +17 0
R_Ye Satu –1
 8 to +17 0
R_Ye Phase –1
 8 to +17 0
Ye Satu –1
 8 to +17 0
Ye Phase –1
 8 to +17 0
Ye_G Satu –1
 8 to +17 0
Ye_G Phase –1
 8 to +17 0
Detail1 V DTL 0 to 63 
H DTL 0 to 63 
Crisp 0 to 63 10
Peak FREQ 1
 .4 MHz to 37.1 MHz 1.4 MHz
Level Dep. 0 % to 30 % 0 %
Dark DTL OFF, 1 to 7 OFF
Corner DTL 0 to 31 0
DTL_Source 
 G+B+R, R, B, R+B, G, R+G, G+B, R+G+B R+G
DTL_Clip+ 0 to 63 0
DTL_Clip– 0 to 63 0
Detail

 DTL_Knee+ 0 to 15 0
DTL_Knee– 0 to 15 0
Knee DTL OFF, 1 to 39 OFF
Table of adjustment setting ranges 
						

							34
MenuItem Adjustment setting range Initial value
Skin Tone Detail1 Skin Tone DTL ON, OFF OFF
Skin Tone Get EXECUTE, CANCEL (execution items) —
 Cursor OFF, ON OFF
 H Cursor 1 to 19
 0 960
 V Cursor 1 to 540 
 70
ZEBRA OFF, A, B, A+B OFF
Effect MEM A, B, A+B A+B
Skin 

Tone Detail Skin Tone DTL ON, OFF OFF
MEM Select A, B A
Skin Tone Crisp –63 to 0 to +63 0
Phase 0 to 359 0
Width 0 to 
 55 0
Saturation 0 to 
 55 0
Table of adjustment setting ranges 
						

							35
Table of adjustment setting ranges
Maintenance
MenuItem Adjustment setting range Initial value
Date / Time (*1) Present (Display item) (Current date/time)
Adjust NOP, SET NOP
1

H, 4H 1H, 4H 1H
Date YY Year (Current year)
Date MM Month (Current month)
Date DD Day (Current day)
Date aaa Day of week (Current day of week)
Time HH Hours (Current hours)
Time NN Minutes (Current minutes)
Time SS Seconds (Current seconds)
Set Exe NOP, SET NOP
Reset NOP, SET NOP
SD Card Mode FORMAT, LOAD, STORE LOAD
File No. 1 to 8 1
EXECUTE Yes?, No? —
Scene File Mode LOAD, STORE LOAD
File No 1 to 8 1
EXECUTE Yes?, No? —
Lens File Mode LOAD, STORE LOAD
File No 01 to 16 01
FileName Enables a name (8 characters) to be set. (Filename)
EXECUTE Yes?, No? —
Lens Edit Gain R –800 to +800 0
Gain G –800 to +800 0
Gain B –800 to +800 0
Flare R –100 to +100 0
Flare G –100 to +100 0
Flare B –100 to +100 0
W H SAW R/G/B –100 to +100 0
W H PARA R/G/B –100 to +100 0
W V SAW R/G/B –100 to +100 0
W V PARA R/G/B –100 to +100 0
Store? (execution items) —
Cancel? (execution items) —
Option (*

) — — —
Iris Cont. Auto Iris ON, OFF OFF
Window Select 1 to 8 (*3) 1
Iris Level 0 to 100 60
Peak Ratio 0 to 100  50
A.Iris Range NORMAL, (3/4), (
 /4), (1/4)NORMAL
A.Iris Speed 1 to 
 5 15
LensExtComp.SW NORMAL, ON NORMAL
LensExtComp.LVL –40 to +40 0
*1:   If the date and time have not been set properly, the time may not be updated properly. 
The clock has an error which may cause it to gain or lose up to one minute per month.
*2:  The menu displayed differs depending on the type of option board installed.
*3:  The types of windows which can be selected are as shown in the figure below.
1 234
5 678 
						

							36
MenuItem Adjustment setting range Initial value
CINE Gamma Cinema Gamma SW NORMAL, ON NORMAL
Cinema Gamma SEL VIDEO_REC, FILM_REC VIDEO_REC
Black STR LVL 0 to 30 30
Dynamic LVL 
 00 %, 300 %, 400 %, 500 % 00 %
Knee Point +30 to +90 +30
Knee Slope 150, 
 00, 50, 300, 350, 400, 450, 500, 550, 600 150
ASU Filter REF, Current REF
Setup Mode FULL (standard), EASY (simplified) FULL
REF File F
 actory, User1, User, User3 Factory
M-PED Target 0.0 % to 7.5 %  5.0 %
ASU Execute (execution items) —
Tally Guard Tally Guard OFF, ON OFF
G / L H Phase-Coarse –60 to +60 (during HD signal genlock)
–1

0 to +10 (during SD signal genlock) 0
H Phase-Fine –45 to +45 0
SD-HD Phase CRS –4 to +4 0
SD-HD Phase Fine –99 to +99 0
HD-SD Phase CRS –7 to +8 0
HD-SD Phase Fine –99 to +99 0
SD-HD V Phase SD, HD SD
SC Coarse 1 to 8 1
SC Fine –
 55 to +55 0
SC-H Coarse 1 to 8 1
SC-H Fine –
 55 to +55 0
Shutter Shutter OFF, ON OFF
SYNCHRO OFF, ON OFF
Mode Fixed at SHUTTER SHUTTER
Speed When SHUTTER is ON, SYNCHRO is OFF 
 100/1

5/50/500/1000/000
When SHUTTER is ON, SYNCHRO is ON 
 60.9 Hz to 99.8 Hz 
When SHUTTER is OFF, SYNCHRO is ON 
 60.9 Hz to 99.8 Hz
When SHUTTER is OFF, SYNCHRO is OFF 
 100/1

5/50/500/1000/000 When SHUTTER is ON, 
SYNCHRO is OFF: 100 
 
When SHUTTER is ON, 
SYNCHRO is ON: 60.9 
 
When SHUTTER is OFF, 
SYNCHRO is ON: 60.9 
 
When SHUTTER is OFF, 
SYNCHRO is OFF: 100
ROM Version CAM (Display item) (Current value)
B, U (*4) (Display item) (Current value)
PLD Version TG (Display item) (Current value)
SHD (Display item) (Current value)
MEM (Display item) (Current value)
RET VF (Display item) (Current value)
AUX (Display item) (Current value)
CAMSYS (Display item) (Current value)
OPTION (Display item) (Current value)
Format Present (Display item) (Current value)
Format 50
  i, 59.94  i, 3.98p, 4p, 5p, 9.98p, 30p 59.94 i
Table of adjustment setting ranges
*4:  This is displayed when the buildup unit is connected. 
						

							37
SD card operations
These operations are performed on the SD Card page on the Maintenance menu.
The VF display settings and camera function settings on the Operation menu can be recorded on the SD card.
For details on what items are stored in the memory of the SD card, refer to “Table of the adjustment setting ranges.”
Mode: SD card operation mode settingSelect the SD card operation here.
Setting range: FORMAT, LOAD, STORE
FILE No.: File selection Select the number of the file to be loaded or stored here.
Setting range: 1 to 8
 The files on the SD card have filenames which range from “3500cm01.dat” for File No.1 to “3500cm08.dat” for File No.8.
 The SD card may not work properly if files have been edited using a personal computer or other device.
EXECUTE
The item set in “Mode” is executed here.
When the arrow cursor () is moved to EXECUTE and the JOG dial button is pressed, “No?” appears.
When the dial button is turned, “Yes?” appears.
When the dial button is pressed while “Yes?” is displayed, the selected operation is executed.
Conversely, when it is pressed while “No?” is displayed, the selected operation is canceled. 
						

							38
CN# in the
Instructions
  VF   HR12-14RA-20SC (Hirose)
Pin# Signal
1 VF+1 V
 VF+1 V
3 UNREG_GND
4 VF-PBOUT_GND
5 VF-PBOUT_GND
6 VF-YOUT
7 VF-YOUT_GND
8 VF_CLK
9 VF_WR
10 VF_DATA
11 UNREG_GND
1

 ZEBRA_SW
13 PEAKING
14 TA_BOX_ACT
15 VF-PROUT
16 VF-PBOUT
17 VF_SW3
18 FRONT_VR
19 TA_TALLY


0 F_GND
  REAR VF CN   D02-29S-N-F0 (JAE)
Pin# Signal
1 VF-YOUT
 VF-PBOUT
3 VF-PROUT
4
5 I
 C_DATA
6 R_TALLY
7 TA_TALLY
8
9 LCD+1
 V
10 1 V
11 VF-YOUT_GND
1
 VF-PBOUT_GND
13 VF-PROUT_GND
14 AGND
15 DGND
16
17 UNREG_GND
18
19 F_GND


0 LCD_ACT

1


 3 PEAKING_CONT

4 IC_CLK
5 G_TALLY


6 VF_P_REQ

7
8
9
   Buildup unit I/F   QR/P8-20S-C(01) (Hirose)
Pin# Signal
1 VF_YOUT3
 VF_YOUT3_GND
3 VF_PBOUT3
4 VF_PBOUT3_GND
5 VF_PROUT3
6 VF_PROUT3_GND
7 BU_CRN_DATA_H
8 BU_CRN_DATA_C
9 BU_CRN_CONT_H
10 BU_CRN_CONT_C
11 OPT_AC(H)
1

 LNS_ID_CO
13 LNS_IP–B
14 I
 C_DATA
15 I C_CLK
16 LNS_FOCUS_POS
17 LNS_L_TXD
18 BU_ACT
19 DGND


0 OPT_AC(C)
CN# in the
Instructions
  
DC IN   HA16RA-4P (Hirose)
Pin# Signal
1 EXT_GND

3
4 EXT+1
 V
  MIC1   HA16PRM-3SB(05) (Hirose)
Pin# Signal
1 MIC1_GND
 MIC1(H)
3 MIC1(C)
   MIC2   HA16PRM-3SB(05) (Hirose)
Pin# Signal
1 MIC _GND
 MIC (H)
3 MIC (C)
  TALLY/DC   HR10A-7R-4SC (Hirose)
Pin# Signal
1 UNREG_GND
 R_TALLY_OUT (contact output)
3 G_TALLY_OUT (contact output)
4 SCRIPT+1
 V
  EARPHONE   HSJ0927-0160209 (Hoshiden)
Pin# Signal
1 PHONE_GND
 PHONE_OUT
3
   TRUNK   HR10A-10R-12SC (Hirose)
Pin# Signal
1 CMD-OUT0(H)
 CMD-OUT0(C)
3 CMD-IN0(H)
4 CMD-IN0(C)
5 CMD-OUT1(H)
6 CMD-OUT1(C)
7 CMD-IN(H)
8 CMD-IN1(C)
9
10 DGND
11
1
 
   LENS   HR10A-10R-12SC (Hirose)
Pin# Signal
1 LENS_RETSW
 LENS_VTRSW
3 AGND
4 ENF_SERVO
5 IRIS_CONT
6 LENS+1
 V
7 IRIS_POSI
8 H_IRIS_A-R
9 EXTENDER
10 ZOOM_POSI
11 FOCUS_POS/L_RXD
1

 S_IRIS_A-R/L_TXD
  FRONT MIC   HA16PRM-3S(05) (Hirose)
Pin# Signal
1 FRONT_MIC_GND
 FRONT_MIC(H)
3 FRONT_MIC(C)
AK-HC3500 connector pin assignment
CN# in the
Instructions
 K  OPT FIBER   EDW.3K.93C.TLC (LEMO)
Pin# Signal
01 OPT-TX (Mark Band = IN)
0
 OPT-RX (Mark Band = OUT)
1 STBYINCOM-T
 STBYINCOM-R
3 A
C0V(C)
4 AC0V(H)
   INCOM   XLR5-31F77 Female (ITT Cannon)
Pin# Signal
1 TALK_GND
 TALK
3 RECEIVE_GND
4 RECEIVE
5 PGM
   RET CONT   HR10A-7R-6SC (Hirose)
Pin# Signal
1 INCOM1_MIC_ON
 INCOM
 _MIC_ON
3 AGND
4 RET_CNT3
5 RET_CNT1
6 RET_CNT
 
  EXT I/O   HR10A-13R-20SC (Hirose)
Pin# Signal
1 BU_CRN_DATA_H
 BU_CRN_DATA_C
3 BU_CRN_CONT_H
4 BU_CRN_CONT_C
5 DGND
6 CRN_INC_R
7 CRN_INC_R_GND
8 CRN_INC_T
9 CRN_INC_T_GND
10 CRN_PGM1_LVL
11 CRN_PGM
 _LVL
1
13
14 G_TALLY_VF
15 R_TALLY_VF
16 T_TALLY_VF
17 CRANE_ACT
18 EXT+1
 V
19
 0 UNREG_GND
  HD SDI   BNC(75)J-H.FLJ-BPA(40) (Hirose)
Pin# Signal
1 SDI_OUT
 SDI_OUT_GND
  AUX   BNC(75)J-PL72J-BPA (Hirose)
Pin# Signal
1 AUX
 AUX_GND
  PROMPT/GL   BCJ-R/1 (Canare)
Pin# Signal
1 PROMPT/GL_IN
 PROMPT_GND/GL_IN_GND
  REMOTE   HA10A-10R-10SC (Hirose)
Pin# Signal
1 CAM_DATA(H)
 CAM_DATA(C)
3 CAM_CONT(H)
4 CAM_CONT(C)
5
6
7
8
9 RCOP+1
 V
10 UNREG_GND 
						

							39
External dimension drawings
Unit: inch (mm)
14-3/16 (360)
10-1/4 (260)
4-1/8 (105)
5-5/16 (135) 
						

							40
Specifications
Power supply:   DC 1 V 
(when external power is supplied) 
A

C 150 V - 40 V  
(when CCU is connected)
Power consumption: 
  8 W (during external power 
supply operation, camera only)
  34 

W (when CCU is connected)
 indicates safety information.
Ambient temperature range: 
   
14 °F to 113 °F (–10 °C to +45 °C)  
[Preheating required at temperatures 
belo
 w 3 °F (0 °C)]
Storage temperature range: 
  –4 °F to 140 °F (–

0 °C to +60 °C)
Operating ambient humidity: 
  Less than 85 %
W

eight:   Approx. 10.36 lbs. (4.7 kg)
Dimensions:  5-5/16˝ 
 10-1/4˝
    14-3/16˝  
(W
    H
    D)   (135  60   360 mm) 
  [e
xcluding protrusions]
Basic items
1) Pic
 kup device:   /3˝ . million pixel IT-CCD   3


) System:   GBR pickup system
3) Color separation optical system: 
  f/1.4 pr

ism
4) Optical filters:    CC:  300K, 4300K, 6300K, Cross, 
Diffusion
  ND:

 CAP, Through, 1/4, 1/16, 1/64
5) Lens mount:  Bayonet type
6) Output standard:  SMPTE 9M
7) Sensitivity:    f/10.0, 000 lux, 300K, 
 
white reflectance 89.9 % 
(Vertical frequency: 59.94 Hz)
8) Horizontal modulation: 
  More than 50 % (

7.5 MHz)
9) S/N ratio:  60 dB typ. (Y: 30 MHz)
10) Horizontal frequency: 
    33.716 kHz, 11

5-line frame  
(Vertical frequency: 59.94 Hz) 


8.15 kHz, 115-line frame  
(Vertical frequency: 50 Hz)
11) Vertical frequency: 
  59.94 Hz or 50 Hz, inter

lace
Input/output signals
1) MIC input:
     –0, –30, –40, –50, –60 dBm  
(XLR 3-pin f

emale   
) 
Gain selected by camera menu


) INCOM:     0 dBm/600 ohms  
(XLR, 5-pin f

emale   
) 
(Mixing is controlled separately for 
PGM1 and PGM
 .) 3) HD-SDI1/HD-SDI output:
 
    HD signal = 0.8 

Vp-p, 75 ohms (BNC)  
The HD-SDI

 signal output can be 
added to the regular images using the 
camera menu item setting and switched 
to the VF or RET image output.
4)

  Prompt output:  VBS signal = 1 Vp-p, 75 ohms (BNC)
  G/L input:    Tri-level SYNC or black burst (BNC)  
Selected using a switch.
5)

   HD RET input:    HD analog signal = 1 Vp-p, 75 ohms 
(BNC)
  Prompt

 output:  VBS signal = 1 Vp-p, 75 ohms (BNC)
  Down converter output:  
 

    VBS or D1 signal = 1 Vp-p or 0.8 Vp-p, 
75 ohms (BNC) 
Input or output can be selected using 
the camera menu item setting.
Control
1) P
 ower selection:  EXT, OFF, CCU
) USER 1, , 3:    Functions specified by menu items can 
be allocated to the switch.
3) RET A/B selection: 
  F

or selecting the return signal
4) Monitor selection:  
Y/C, NAM, R, G, B
5) RET, PTT SW: RET, PTT
6) Gain selection:  LOW, MID, HIGH
7) Output selection:  CAM, BAR, TEST
8) White balance mode: 
  A, B

, preset
9) Shutter speed selection: 
    1/100, 1/1

5, 1/50, 1/500, 1/1000, 
1/000
10) AWB, ABB settings
11) Menu selection
1
 ) CALL SW
13) INCOM:  MIC ON/OFF, receive or PGM level
14) MIC setting:  MIC power, MIC gain, MIC1 selection
15) Optical filter setting: 
    REM, LOCAL selection and LOCAL 
setting
16) Bac

k light SW:  ON/OFF
*  
When the CCU is connected, the selection functions  
for 6) to 10) are not effective.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.