Panasonic Mp3 Cd Player Weather Band Receiver Cq 5800u Operating Instructions

							31CQ-5800U
❏Removing Procedures
qRemove the trim plate q.
wLock release.
qInsert the lock cancel plate runtil you hear a
click.
wPull the unit out.
ePull the unit out with both hands.
q
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							32CQ-5800U
Electrical Connections
Caution
• This wiring information is for experienced technical individual, for saf\
ety reason, please your dealer wire this connection.
• This product is designed to operate with a 12 V DC, negative ground batt\
ery system.
• To prevent damage to the unit, be sure to follow the connection diagram \
below.
• Do not insert the power connector into the unit until the wiring is comp\
leted.
• Be sure to insulate any exposed wires from a possible short-circuit from\
 the vehicle chassis. Bundle all cables and keep cable
terminals free from touching any metal parts.
• Remember, if your vehicle has a drive computer or a navigation computer,\
 the data of its memory maybe erased when the bat- tery terminals are disconnected.
(Rear Side)
CD Receiver
CQ-5800U
Antenna
External Remote Control LeadWhen using non-Panasonic external remote control, refer to the 
manufacture for their product before connecting.
Accessory Power(ACC)
(+12 V DC, negative ground
 only)
Ground Lead
(Connect to a clean, bare
 metallic part of your vehicle)
Battery Lead
(Connect to vehicle battery)
(Red)
ACC
Ground (Black)
(Yellow)
Battery
Illumination Lead
(Not used)
(Orange)
Illumination
(Violet)
(Violet/Black)
(Gray/Black)
(Green)
(Green/Black)
(White/Black) (Gray)
(white)
Left Speaker (Front) Right Speaker
(Front) Left Speaker
(Rear) Right Speaker
(Rear)
Power Connector
The power connector does not come
along with the unit. If need, please
consult your dealer.
Detail of power connectorNO. FUNCTION NO.FUNCTION
1BA TTERY +12 V 9 REAR SP R(–)
2 GROUND 10 REAR SP R(+)
3 ——— 11 FRONT SP R(–)
4 ——— 12 FRONT SP R(+)
5 ——— 13 FRONT SP L(–)
6 POWER +12 V ACC 14 FRONT SP L(+)
7 ——— 15 REAR SP L (–)
8 ——— 16 REAR SP L (+)
10 12 14 16
7
86 42 53 1
91113
15
❐Wiring Diagram
6@0*@@FOHRYE
 
 
 
 

1.
 
 
						

							33CQ-5800U
CHANGER IN(L) (White)
(R) (Red)
DIN Connector
Conversion Cable for DVD/CD
Changer 
(CA-CC30U, option)
Connection with CD Changer (CX-DP880) 
CQ-5800U
(Rear)System-up connector DIN Cord 
(Black)
CD Changer
CX-DP880(option)
Power Connector(Supplied with CX-DP880)
RCA Cord
Battery Lead 
(Yellow)
To the car battery, continuous
+12 V DC
Ground Lead (Black)
To a clean, bare metallic part of the car
chassis
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							34CQ-5800U
Electrical Connections (continued)
Sirius Satellite Radio (Sirius Connect Vehicle Tuner)
SC-C1*(option)Interface Adapter for Sirius Satellite Radio
(CA-LSRO1U*, option)
CQ-5800U(Rear)
* Please understand that Panasonic is not liable for modification of speci\
fications, shape, name and the like of the
optional Sirius Radio receiver and interface adapter without prior notic\
e because they are not manufactured by
Panasonic.
Connection with Sirius Satellite Radio (SC-C1)
SC AUDIO cord(Supplied with SC-C1)
Power Connector
(Supplied with CA-LSRO1U)
System-up Connector
SC OUTPUT Connector
Connection with XM Satellite Radio (CNP2000UC)
XM Direct2
CNP2000UC*(option)
CQ-5800U
(Rear)
Protocol Interface Adapter
Mini-Micro
Car Antenna
* Please understand that Panasonic is not liable for modification of speci\
fications, shape, name, and the like of the
optional XM receiver and digital adapter without prior notice because th\
ey are not manufactured by Panasonic.
XM Direct2 Panasonic Connection Cable
CNPPAN1*(option)
XM MiniTuner
& Dock
System-up Connector
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							35CQ-5800U
CHANGER IN
Connection with Expansion Module (CY-EM100U)
CQ-5800U
(Rear)
CD Changer
CX-DP880(option)
Expansion Module
CY-EM100U(option)
Conversion Cable for
CD Changer (CA-
CC30U, option)
Direct Cable for iPod(CA-DC300U, option)
(L) (White)
(R) (Red)
Head unit/Expansion Module
Connecting cable
(Supplied with CY-EM100U)
iPod
System-up
Connector
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							36
Troubleshooting
CQ-5800U
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized Panasonic
Servicenter. The product should be serviced only by qualified personnel.\
Please refer the checking and the repair to professionals. Panasonic
shall not be liable for any accidents arising out of neglect of checking\
 the
unit or your own repair after your checking.
Never take measures especially for those other than indicated by ital-
icletters in “Possible Solution” described below because those are
too dangerous for users to handle themselves.
Wa rning
¡Do not use the unit in an irregular condition, for
example, without sound, or with smoke or a foul
smell, which can cause ignition or electric shock.
Immediately stop using the unit and consult your
dealer.
¡Never try to repair the unit by yourself because it is
dangerous to do so.
ProblemPossible causeaPossible solution
No power to the unit
The power cord (battery, power and ground) is connected in the wrong w\
ay.
aCheck the wiring.
Fuse blows out.
aEliminate the cause of fuse blowout and replace the fuse with new one.Consult your dealer.
Sound is not generated.
MUTE is set to ON.
aSet MUTE to OFF.
There is contact between the external mute lead and the chassis.
aConnect the external mute lead correctly. If the lead is unused, insulat\
e it.
The wiring of speaker lines are not correct, or a break or poor contact \
arises.
aCheck the wiring in accordance with the wiring diagram.
Noise
There is an electromagnetic-wave generator such as a cellular phone near\
 the unit or
its electrical lines.
aKeep an electromagnetic-wave generator such as a cellular phone away fro\
m
the unit and the wiring of the unit. In case that noise cannot be elimin\
ated
due to the wiring harness of the car, consult your dealer.
The contact of the ground lead is poor.
aMake sure that the ground lead is connected to an unpainted part of the \
chas-
sis securely.
Noise is made in step with
engine revolutions.Alternator noise comes from the car.
aChange the wiring position of the ground lead.aMount a noise filter on the power supply.
Common
Some operations are not executable.Some operations are not executable in particular modes such as menu mode\
.
aRead the operating instructions carefully and cancel the mode. If the un\
it is
still out of order, consult your dealer.
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							37CQ-5800U
No sound from speaker(s)
BALANCE/FADER setting is not appropriate.
aReadjust BALANCE/FADER.
There is a break, a short circuit, poor contact or wrong wiring regardin\
g the speaker
wiring.
aCheck the speaker wiring.
The speaker channels are
reversed between right and left.The speaker wiring is confused between right and left.
aPerform the speaker wiring in accordance with the wiring diagram.
The sound field is not clear inthe stereo mode. Centralsound does not settled.The plus and minus terminals at right and left channels of speakers are \
connected
reversely.
aPerform the speaker wiring in accordance with the wiring diagram.
The power fails
unintentionally.The safety device works.
aConsult your dealer, or your nearest Panasonic Servicenter.
Poor reception or noise
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are correct. \
In
addition, check to see whether the antenna ground is securely connected \
to
the chassis.
No power is supplied to the antenna amplifier (when using a film antenn\
a, etc.).
aCheck the wiring of the antenna battery lead.
Radio
The number of auto preset stations is less than 6.The number of receivable stations is less than 6.
aMove to an area where receivable stations number is maximum, and try pre\
-
setting.
Preset stations cannot be stored.The contact of the battery lead is poor, or the battery lead is not alwa\
ys powered.
aMake sure that the battery lead is connected securely, and preset statio\
ns
again.
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							38
Troubleshooting (continued)
CQ-5800U
No playback or disc ejected
The disc is inserted upside down.
aInsert a disc correctly.
There is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc.
Sound skipping or noiseThere is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc. 
Sound skipping due to
vibration 
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Disc unejectable
Something such as a peeled label obstructs the disc coming out.
aConsult your dealer.
The microcontroller in the unit operates abnormally due to noise or othe\
r factors.
aUnplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
CD
The CD-R/RWs that are
playable on other devices are not playable on this unit.The playability of some CD-Rs/RWs may depend on the combination of media\
,
recording software and recorder to be used even if these CD-Rs/RWs are p\
layable
on other devices such as a PC.
aMake CD-R/RWs in different combination of media, recording software and
recorder after referring to the description about the compressed audio p\
layer.
Sound skipping or noise
There is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
No playback or disc ejectedThe disc has unplayable formatted data.
aCheck the file format.
Note:Refer to “Notes on MP3/WMA”. (aPage 44)
MP3/WMA
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							39CQ-5800U
Music is not played back evenif the USB device isconnected.
The USB device and USB extension cable are not connected correctly.
aConnect the USB device and USB extension cable correctly.
There is no music stored in a format that is supported on this unit.
aCheck if there is any music data that can be played stored on the USB de\
vice.
The file system of the USB device is not compatible with this unit.
aUse a USB device with a FAT12/16/32 file system.
The current consumption of the USB device exceeds 500 mA.
aUse a USB device with a current consumption lower than 500 mA.
“READING” is displayed butmusic is not played back.
A USB hub is connected.
aDo not use a USB hub.
Too many recorded folders/files exist.
aWhen there are too many recorded folders/files, it may take a long time \
to
read all of the files.
USB
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend \
that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced only by a qualifie\
d technician.
XM Satellite Radio Control
Channel unselectable
No contact with XM Satellite radio Inc.aRefer to page 20 of this book and the XM’s website to sign up for XM \
Radio
service.
6@0*@@FOHRYE
 
 
 
 
 1.
 
 
						

							40
Error Display Messages
CQ-5800U
The player for some reason cannot read the file you are trying to play. \
(File recorded
in an unsupported file system, compression scheme, data format, file nam\
e exten-
sion, damaged data, etc.)
aSelect a file that the player can read. Check the type of data recorded \
on the
disc. Create a new disc if necessary.
The disc is dirty, or is upside down.
aCheck the disc.
The disc has scratches.
aCheck the disc.
No operation by some cause.
aUnplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
A WMA file can be copyrighted. 
aThe file protected by copyright is not playable.
No disc in the player. 
aInsert disc into the disc slot.
CD/MP3/WMA
DisplayPossible causeaPossible solution
CD changer
The disc is dirty, or is upside down.
aCheck the disc.
The disc has scratches.
aCheck the disc.
No operation by some cause.
aEject the magazine. If failure persists, press the reset switch on the d\
isc
changer. If normal operation is not restored, call the store where you p\
ur-
chased the unit or the nearest Panasonic Servicenter to ask for repairs.\
No disc is in the CD Changer (magazine).
aInsert discs into the changer (magazine).
The changer has become disconnected from the unit in the changer mode.
aVerify the wiring.
6@0*@@FOHRYE
 
 
 
 
 1.