Panasonic Mp3 Cd Player Weather Band Receiver Cq 5302u Operating Instructions

							CQ-5302U41
Note:MP3 encoding and writing software is not
supplied with this unit.
Points to remember when making MP3 files
¡High bit rate and high sampling frequency are
recommended for high quality sounds.
¡Selecting VBR (Variable Bit Rate) is not
recommended because playing time is not displayed
properly and sound may be skipped.
¡The playback sound quality differs depending on the
encoding circumstances. For details, refer to the
user manual of your own encoding software and
writing software.
¡It is recommended to set the bit rate to “128 kbps
or more” and “fixed”.
Display Information
Displayed items
Displayable characters
¡Name files and folders in accordance with the
standard of each file system. Refer to the
instructions of writing software for details.
¡ASCII character set and special characters in each
language can be displayed.
Notes:
¡With some software in which MP3 format files have
been encoded, the character information may not be
displayed properly.
¡Undisplayable characters and symbols will be
converted into an asterisk ( ). 
Folder selection order/file playback order
Maximum number of files/folders
¡Maximum number of files: 999
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 255
¡Maximum number of folders: 255 (Root folder is
included.)
Notes:
¡This unit counts the number of folders irrespective
of the presence or absence of MP3 file. 
¡If the selected folder does not contain any MP3 files,
the nearest MP3 files in the order of playback will be
played.
¡Playback order may be different from other MP3
players even if the same disc is used.
¡“ROOT” appears when displaying the root folder
name.
Caution
Never assign the “.mp3”, file name extension to
a file that is not in the MP3 format. This may
not only produce noise from the speaker
damage, but also damage your hearing.
Copyright
It is prohibited by copyright laws to copy, distribute
and deliver copyrighted materials such as music
without the approval of copyright holder except
enjoying yourself personally.
No warranty
Above description complies with our investigations as
of December 2005. It has no warranty for
reproducibility and displayability of MP3.
¡CD-TEXT
Disc title 
Track title
¡MP3
Folder name
File name
¡MP3 (ID3 tag)
Album name
Title name/Artist name
Notes on MP3
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U42
Speaker Connections
Caution:Please follow the instructions given below.  Failure to do so will cause damage to the unit and speakers.
L
R
- 
- 
- - 
- - 
- - 
- 
- +
+
++
++
+
++ +- +
- +
- +- +- +
- +- +- +
L
R
L
R
L
R


(White)
(White
w/black stripe)
Chassis
(Gray 
w/black stripe)(Gray)
Chassis
• Use ungrounded speaker only.
• The maximum speaker input should be 37 W or more.  (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
• Never connect the speaker cord to
the body of the car.• Do not use a 3-wire type speaker
system having a common earth
lead.• Do not connect more than one
speaker to one set of speaker
leads.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Service center. The product should be serviced only by a qualified technician.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Caution
This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use
fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start
smoking, ignite or other malfunction.
If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A
or a circuit breaker at the BATTERY lead of your vehicles harness. please see page 47 to find out where BATTERY +
12 V is for your dealer adding the fuse or the circuit breaker.
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U43
Installation Guide
❐This installation information is designed for experienced installers and is not
intended for non-technical individuals. It does not contain warnings or cautions of
potential dangers involved in attempting to install this product.
Any attempt to install this product in a vehicle by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
❐If your vehicle is equipped with air bag and/or anti-theft systems, specific procedures
may be required for connection and disconnection of the battery to install this product.
Before attempting installation of this electronic component, contact your vehicle
dealer or manufacturer to determine the required procedure and strictly follow their
instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOY-
MENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN
DAMAGE TO THE VEHICLE AND PERSONAL INJURY.
WARNING
❐Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through the
remaining steps: 
(Please refer to the “WARNING” statement above.)
• Identify and label the car wires.
• Connect the vehicle wires to the wires of the power
connector.
• Install the unit in the dashboard.
• Check the operation of the unit.
If you encounter problems, please consult your nearest
professional installer.
Caution
This unit operates with a 12 V DC negative ground
auto battery system only. Do not attempt to use it in
any other system. Doing so could cause serious
damage.
Before you begin installation, look for the item which is
packed with your unit.
• 
Installation Hardware…Needed for in-dash installation.
❐Dashboard Specifications
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U44
Installation
❐Preparation❐Installation Hardware
Warning
If your vehicle is equipped with air bag and/or anti-
theft systems, specific procedures may be required
for connection and disconnection of the battery to
install this product.
Before attempting installation of this electronic
component, contact your vehicle dealer or
manufacturer to determine the required procedure
and strictly follow their instructions. 
FAILURE TO FOLLOW THE PROCEDURE MAY
RESULT IN THE UNINTENDED DEPLOYMENT OF
AIR BAGS OR ACTIVATION OF THE ANTI-THEFT
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE
AND PERSONAL INJURY.
Caution
Various settings that have been stored in the
memory in other on-board equipment (vehicle
navigation etc.) may be lost if the battery terminals
are disconnected.
Therefore, we recommend to make a record of or to
back up the settings before disconnecting the
terminals.
After completing installation of the main unit, set the
equipment again according to the record.
• Disconnect the cable from the negative  battery
terminal (see warning and caution below).
• Remove Mounting Collar 
qfrom the main unit
temporarily, which are already mounted at shipment.*
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30˚.
❐Dashboard Installation
Installation Opening
This unit can be installed in any dashboard having an
opening as shown below. The dashboard should be
4.75mm {3/16”} – 5.56 mm {7/32”} thick in order to be
able to support the unit.
Q’tyItemNo.Diagram
q1 Mounting Collar*
Plain washer (5mmø)
w2
Spring Washer (5mmø)e2
Hex. Nut (5mmø)r2
Rear Support Strapt1
Hex. Bolt
(5mmø 
×25 mm)y1
Toothed Lock Washer
(5mmø)u1
Removal Tool
(U-shaped)i2
Antenna Connectoro1
Mounting bolt
(5 mmø)
qMounting collarRear support bracket
(provided on the vehicle) Rubber cushion (option)
(a) Using the rear support strap t
(b) Using the rubber cushion (option)
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U45
    
1
2
3
Caution
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for correctness.(apage 47)
The included Mounting Collar qis designed specially for this unit. Do not use it to attach any other model.
Insert Mounting Collar qinto the
dashboard, and bend the mounting tabs
out with a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
After installation reconnect the negative
(–) battery terminal.
The tabs to be bent vary depending on
the vehicle.  To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:Ta b
qMounting
Collar
Mounting Holes
Mounting Bolt Power Connector
Mounting springs (C)
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar 
qfirmly.
Mounting SpringMounting
Hole
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U46
To Remove the Unit from the vehicles dashboard
Insert each Removal Tool iand pull.
Note:Do not lose Removal Tools. They will be needed to remove the unit from the vehicles dashboard.
iRemoval Tool
(U-shaped)
Installation (Continued)
CQ-5302U-OIEng-D  4/7/2006  2:10 PM  
						

							CQ-5302U47
Electrical Connections
Caution
• This wiring information is for experienced technical individual, for saf\
ety reason, please your dealer wire thisconnection.
• This product is designed to operate with a 12 V DC, negative ground batt\
ery system.
• To prevent damage to the unit, be sure to follow the connection diagram b\
elow.
• Do not insert the power connector into the unit until the wiring is comp\
leted.
• Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and keep cable terminals free from touching any metal parts.
• Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased when the battery terminals are disconnected.
(Rear Side)
CD Receiver
CQ-5302U
Antenna
Wired remote
connector

 Antenna Connector
Accessory Power(ACC)
(+12V DC, negative ground
 only)
CD changer control connector XM/SIRIUS control connector
Ground Lead
(Connect to a clean, bare
 metallic part of your vehicle)
Battery Lead
(Connect to vehicle battery)
(Red)
ACC
Ground (Black)
(Yellow)
Battery
Illumination Lead
(Not used)
(Orange)
Illumination
(Violet)
(Violet/Black)
(Gray/Black)
(Green)
(Green/Black)
(White/Black) (Gray)
(white)
Left Speaker (Front) Right Speaker
(Front) Left Speaker
(Rear) Right Speaker
(Rear)
Power Connector
The power connector does not come
along with the unit. If need, please
consult your dealer.
Detail of power connectorNO. FUNCTION NO. FUNCTION1B ATTERY +12 V 9 REAR SP R (–)2 GROUND 10 REAR SP R (+)3
o
o
o
o 11 FRONT SP R (–)4
o
o
o
o 12 FRONT SP R (+)5
o
o
o
o 13 FRONT SP L (–)6POWER +12 V ACC 14 FRONT SP L (+)7
o
o
o
o 15 REAR SP L (–)
8 
o
o
o
o 16 REAR SP L (+)
※
10 12 14 16
7
86 42 53 1
9111315
❐Wiring Diagram
CQ-5302U-OIEng-D  4/20/2006  11:28 AM  
						

							CQ-5302U48
Electrical Connections (Continued)
Example combination
• Sirius receiver (SIR-PAN1, option)
Note:
• For wiring, carefully read the operating instructions
for the devices connected.
Extension Cable for connecting the unit and the Sirius receiver.
※ The Extension cable does not come along with the unit, 
    if need, please consult your dealer.
CQ-5302U (REAR)
 Sirius control connector
(10P connector)
- SAT
DISC UP
Wired Remote
( CA-RC330U, option ) 
SELPWRRC330U
APM/PRGBANDSEEKVOLTUNE
DISPMODE
CD changer control connector
(10P connector)
Wired Remote Connector
(8P connector)
 
SIRIUS ANT
8P DIN (Male)
Power cord Sirius receiver (SIR-PAN1,option)
HEADUNIT
❐Upgrading the system (connect a Sirius receiver and the wired remote.)\
CQ-5302U-OIEng-D  4/20/2006  11:28 AM  
						

							CQ-5302U49
Extension Cable for connecting the unit and the XM receiver.
※The Extension cable does not come along with the unit, 
    if need, please consult your dealer. XM ANT XM RECEIVER
(XM-RVR-FM-001, option)
antenna
RCA (Red) R
8P DIN (Male)
RCA (White) L
contoroller/
head unitR
FM out
audio outR
L
power
CQ-5302U (REAR)
 XM control connector
(10P connector)
- SAT
DISC UP
Wired Remote
( CA-RC330U, option ) 
SELPWRRC330U
APM/PRGBANDSEEKVOLTUNE
DISPMODE
 CD changer control connector
(10P connector)
Wired Remote Connector
(8P connector)
 
Note:
For wiring, carefully read the operation instructions for the devices co\
nnected.
❐Upgrading the system (connect a XM receiver and the wired remote.)
CQ-5302U-OIEng-D  4/20/2006  11:28 AM  
						

							CQ-5302U50
Extension Cable for connecting the unit and CD changer.
※The Extension cable does not come along with the unit,
    if need, please consult your dealer.
CQ-5302U (REAR)
 CD changer connector
(10P conncetor)
CD Changer (CX-DP880, option)
XM/SIRIUS control connector
(10P connector)
- SAT
DISC UP
Wired Remote
( CA-RC330U, option ) 
SELPWRRC330U
APM/PRGBANDSEEKVOLTUNE
DISPMODE
Wired Remote Connector
(8P connector)
Note:
For wiring, carefully read the operation instructions for the devices co\
nnected.
❐Upgrading the system (connect a CD changer and the wired remote.)
Electrical Connections (Continued)
CQ-5302U-OIEng-D  4/20/2006  11:28 AM