Panasonic Monitor Bt Lh1800 Owners Manual

Before attempting to connect, operate or adjust this product, please read these instructions completely.
Model BT-LH1800P
Model BT-LH1500P
 
POWERABINPUT SELECTSOPTIONMENU/
EXITBLUE
ONLYPHASE CHROMA BRIGHTCONTRASTBT-MULTIFORMATHVDELAYENTERMENU
Liquid Crystal Video Monitor
Printed in Japan
VQT9921F0502H@3 

2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
For Your Safety
THIS APPARATUS MUST BE GROUNDED
To ensure safe operation the three-pin plug must be
inserted only into a standard three-pin power outlet
which is effectively grounded through normal house-
hold wiring.
Extension cords used with the equipment must be
three-core and be correctly wired to...

3
For Your Safety ........................................... 2
Precautions for Use ..................................... 3
Outline ......................................................... 4
Controls and Their Functions ...................... 5
_Front View ........................................... 5
_Rear View ............................................ 5
How To Use On Screen Menu ..................... 6
_How To Get On Screen Menu ............. 6
_MAIN Menu ............................................

4
16-1/4z (412)
14-15/16z (379)
8-5/16z (210)1-9/16z (39)
11-1/2z (291)
3-7/16z (86)
12-1/2z (317)
13-15/16z (353)
12-3/16z (309)
8-5/16z (210)1-9/16z (39)
3-7/16z (86)
11-1/2z (291)
12-1/2z (317)
BT-LH1800
BT-LH1500
Outline
BT-LH1800 and BT-LH1500 are thin, light-weight wide-view industrial liquid crystal monitors which are respectively
equipped with 18.1-inch and 15-inch screen size liquid crystals.
_Multi-input format compatible
Compatible with HD signal input as well as standard NTSC
signal and PAL...

5
Front View
!
@#$ %
POWERAB
INPUT SELECT
SOPTIONMENU/
EXITBLUE
ONLY
PHASE CHROMA BRIGHTCONTRASTMHVDELAYENTER
MENU
qS
1
2
3
4
5
6
78
9
qR
qS
7, 8, 9 to qRare options.
Rear View
Control and Their Functions
! Power switch
This is the main power switch.
With power ON, the upper LED (green) of the switch is
lighted.
@Input select button
This is the signal input select button.
The input line of the button pressed is selected, then the
upper LED (green) is lighted.
A: Line-A (composite input)
B: Line-B...

6
With MARKER selected, the following menu will appear.
MARKER 16:9
Used to set Marker used when 16:9 signal is displayed.
Set-value (underlined is default value)
4:3 13:9 14:9
95% 93% 88% 80%
OFF
MARKER 4:3
Used to set Marker used when 4:3 signal is displayed.
Set-value (underlined is default value)
95% 93% 88% 80%
OFF
MARKER BACK*
1)
Used to make setting for printing out by half tone or black with
respect to external area of 4:3/13:9/14:9 Marker display unit.
Set-value (underlined is default value)...

7
[VIDEO CONFIG] 
>COLOR TEMP             D65
 SHARPNESS H              3
 SHARPNESS V              3
 I-P MODE             MODE2
 MONO                   OFF
 SD ASPECT              4:3   
 HD ZOOM             NORMAL
  
     
              
VIDEO CONFIG menu
VIDEO CONFIGSYSTEM CONFIG
With SYSTEM CONFIG selected, the following menu will
appear.
BACKLIGHT
Used to adjust the brightness of backlight.
Set-value (underlined is default value)
0 – 
63 (BT-LH1800)
0 – 
32  – 63 (BT-LH1500)
POSITION
Used to set...

8
With INPUT SELECT selected, the following menu will ap-
pear.
LINE A, B/S-VIDEO
Used to set the input format of LINE A, B/S-VIDEO.
Set-value (underlined is default value)
AUTO   NTSC PAL
NON-STANDARD
Used to display a signal not in conformity with the broadcast-
ing standard in selection of LINE A, LINE B, S-VIDEO.
Set-value (underlined is default value)
OFF   ON
REMOTE CONFIG
[REMOTE CONFIG] 
>GPI1                 UNDEF
 GPI2                 UNDEF
 GPI3                 UNDEF
 GPI4...

9
INPUT SELECT (continued)
[INPUT SELECT] 
>[LINE A,B/S-VIDEO]    AUTO
 NON-STANDARD           OFF
 [SDI]                 AUTO
  
                
INPUT SELECT SDI menu
INPUT SELECT (continued)
[INPUT SELECT] 
>[LINE A,B/S-VIDEO]    AUTO
 NON-STANDARD           OFF
 [YPbPr/RGB]          YPbPr
 YPbPr                 AUTO
 COMPONENT LEVEL      SMPTE
 [RGB]                 AUTO
 RGB-SYNC               EXT
             
                
INPUT SELECT YPbPr/RGB menu
MAINTENANCE
[MAINTENANCE] 
 RUNNING TIME...

10
_GPI hard specification
8 inputs (refer to D-SUB 9-pin terminal)
_ON/OFF operation
Each terminal of REMOTE operates its assigned function accord-
ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF).
_How to assign the function to each terminal
The assignment to each terminal can be freely executed by
the On Screen Menu.
(Refer to “How To Use On Screen Menu”.)
Contents
GPI 1–GPI 4
GND
GPI 5–GPI 8
Pin No.
Pin 1–Pin 4
Pin 5
Pin 6–Pin 9
[REMOTE CONFIG] 
>GPI1                 UNDEF
 GPI2...