Home
>
Panasonic
>
Recorder
>
Panasonic Memory Card Portable Recorder AG-HPG20P AG-HPG20E Operating Instructions
Panasonic Memory Card Portable Recorder AG-HPG20P AG-HPG20E Operating Instructions
Here you can view all the pages of manual Panasonic Memory Card Portable Recorder AG-HPG20P AG-HPG20E Operating Instructions. The Panasonic manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 31
1 Preparations CapacityDVCPRO/DV Audio /CHDVCPRO50 Audio CH AVC-Intra50 Audio CH DVCPRO HDAVC-Intra100Audio CH * 4 GBApprox. 16 minutesApprox. 8 minutesApprox. 4 minutes 8 GBApprox. 32 minutesApprox. 16 minutesApprox. 8 minutes 16 GBApprox. 64 minutesApprox. 32 minutesApprox. 16 minutes 32 GBApprox. 128 minutesApprox. 64 minutesApprox. 32 minutes 64 GBApprox. 256 minutesApprox. 128 minutesApprox. 64 minutes * Native recordings such as 720p/30pN, 720p/24pN, 720p/25pN,...
Page 32
![Page 32
USER button
The following features are allocated to the buttons at the time of shipping.You can assign EXIT function to USER2 button only as well as ALT function to USER3 button only.For details, refer to the USER1-3 items (Page 97) on the setting menu “SW MODE” screen.
USER1: SYS FORMATUSER2: EXITUSER3: ALT
The functions allocated to [USER] will be displayed while [MENU/MODE CHK] on the normal display screen is held down for at least 2 seconds.Depending on the mode, allocated functions may...](http://img.usermanuals.tech/thumb/58/76177/w300_aghpg20_en_om_d-31.png "Page 32
USER button
The following features are allocated to the buttons at the time of shipping.You can assign EXIT function to USER2 button only as well as ALT function to USER3 button only.For details, refer to the USER1-3 items (Page 97) on the setting menu “SW MODE” screen.
USER1: SYS FORMATUSER2: EXITUSER3: ALT
The functions allocated to [USER] will be displayed while [MENU/MODE CHK] on the normal display screen is held down for at least 2 seconds.Depending on the mode, allocated functions may...")
USER button The following features are allocated to the buttons at the time of shipping.You can assign EXIT function to USER2 button only as well as ALT function to USER3 button only.For details, refer to the USER1-3 items (Page 97) on the setting menu “SW MODE” screen. USER1: SYS FORMATUSER2: EXITUSER3: ALT The functions allocated to [USER] will be displayed while [MENU/MODE CHK] on the normal display screen is held down for at least 2 seconds.Depending on the mode, allocated functions may...
Page 33
Preparations Using SD/SDHC memory cards USER files can be saved or loaded using SD or SDHC memory cards (both types of cards will now be referred to as “SD cards”). (Page 34)In addition, if you save a meta-data upload file on the SD card, it can be loaded and recorded as clip meta-data. (Page 46) Inserting and removing the SD card 1 Open the card slot cover, and insert the card, making sure the SD card is oriented as shown. Close the card slot cover. SD cardaccess LED 1 Open the card...
Page 34
![Page 34
Up to four sets of settings can be saved as four files on the SD card, and they can be loaded from the card.The menu setting value on the thumbnail display screen cannot be saved or loaded.
1 Insert the SD card to the SD card slot.
Press [THUMBNAIL/MODE] to display the normal display screen.
Press [MENU/MODE CHK].
Select “USER FILE” on the setting menu “CARD FUNCTIONS”, select “CHANGE”, and press .Basic operations on the setting menus (Page 88)
CARD FUNCTIONS
PUSH MENU...](http://img.usermanuals.tech/thumb/58/76177/w300_aghpg20_en_om_d-33.png "Page 34
Up to four sets of settings can be saved as four files on the SD card, and they can be loaded from the card.The menu setting value on the thumbnail display screen cannot be saved or loaded.
1 Insert the SD card to the SD card slot.
Press [THUMBNAIL/MODE] to display the normal display screen.
Press [MENU/MODE CHK].
Select “USER FILE” on the setting menu “CARD FUNCTIONS”, select “CHANGE”, and press .Basic operations on the setting menus (Page 88)
CARD FUNCTIONS
PUSH MENU...")
Up to four sets of settings can be saved as four files on the SD card, and they can be loaded from the card.The menu setting value on the thumbnail display screen cannot be saved or loaded. 1 Insert the SD card to the SD card slot. Press [THUMBNAIL/MODE] to display the normal display screen. Press [MENU/MODE CHK]. Select “USER FILE” on the setting menu “CARD FUNCTIONS”, select “CHANGE”, and press .Basic operations on the setting menus (Page 88) CARD FUNCTIONS PUSH MENU...
Page 35
5 Playback Thumbnail display The video data produced on a P2 card by a single shooting session is referred to as a clip. When the unit’s power is turned on, the clips are displayed as thumbnails on the LCD monitor. (If there are many clips, it will take a few moments for all the clips to be displayed) Playback formats The formats which can be played back by this unit are as follows.This unit cannot necessarily play back all the following formats simultaneously. Only the formats that support the...
Page 36
6 Thumbnail display (continued) Names and functions of thumbnail display screen parts (continued) 1 Display statusesThe types of information which are displayed on the screen are displayed as follows. ALL:All clips SAME FORMAT:Clip whose format is the same as the system format SELECT:Clip selected by the STILL/SET button MARKER:Clip to which the shot mark has been added TEXT MEMO:Clip with text memo data SLOT n:Clip on the P2 card in slot “n” PROPERTY:Detailed clip information P/REMAIN: Media...
Page 37
Playback • HDD (Gray) When a mode other than the USB HOST mode is established or when the USB HOST mode is established but the hard drive is not connected, this status is displayed in gray. (White) When the USB HOST mode is established and the hard drive that can be used is connected, this status is displayed in white. (Yellow) When the USB HOST mode is established and the clips on the hard drive are displayed as thumbnails, this status is displayed in yellow. (Red) When the USB HOST mode...
Page 38
![Page 38
Thumbnail display (continued)
Changing the displays on the thumbnail display screen
You can customize the thumbnail display screen to better suit your operating needs for more efficient operation.
1 Display the thumbnail display screen.
Press [MENU/MODE CHK].
Using , and , select the type of clip to be displayed at the lower level of “THUMBNAIL”, and press .
ALL CLIP:Select this to display all the clips.
SAME FORMAT CLIPS:Select this to display the clips whose format is the same...](http://img.usermanuals.tech/thumb/58/76177/w300_aghpg20_en_om_d-37.png "Page 38
Thumbnail display (continued)
Changing the displays on the thumbnail display screen
You can customize the thumbnail display screen to better suit your operating needs for more efficient operation.
1 Display the thumbnail display screen.
Press [MENU/MODE CHK].
Using , and , select the type of clip to be displayed at the lower level of “THUMBNAIL”, and press .
ALL CLIP:Select this to display all the clips.
SAME FORMAT CLIPS:Select this to display the clips whose format is the same...")
Thumbnail display (continued) Changing the displays on the thumbnail display screen You can customize the thumbnail display screen to better suit your operating needs for more efficient operation. 1 Display the thumbnail display screen. Press [MENU/MODE CHK]. Using , and , select the type of clip to be displayed at the lower level of “THUMBNAIL”, and press . ALL CLIP:Select this to display all the clips. SAME FORMAT CLIPS:Select this to display the clips whose format is the same...
Page 39
![Page 39
Playback
Setting the items to be displayed
You can customize how the thumbnails are to be displayed to better suit your intended application. This enables you to change the display of the thumbnail indicators, data displays and other settings.
1 Display the thumbnail display screen.
Press [MENU/MODE CHK].
Using , and , select the item to be set at the lower level of “THUMBNAIL” – “SETUP”, and press .
INDICATOR:This menu item enables you to set the indicator on the thumbnail to...](http://img.usermanuals.tech/thumb/58/76177/w300_aghpg20_en_om_d-38.png "Page 39
Playback
Setting the items to be displayed
You can customize how the thumbnails are to be displayed to better suit your intended application. This enables you to change the display of the thumbnail indicators, data displays and other settings.
1 Display the thumbnail display screen.
Press [MENU/MODE CHK].
Using , and , select the item to be set at the lower level of “THUMBNAIL” – “SETUP”, and press .
INDICATOR:This menu item enables you to set the indicator on the thumbnail to...")
Playback Setting the items to be displayed You can customize how the thumbnails are to be displayed to better suit your intended application. This enables you to change the display of the thumbnail indicators, data displays and other settings. 1 Display the thumbnail display screen. Press [MENU/MODE CHK]. Using , and , select the item to be set at the lower level of “THUMBNAIL” – “SETUP”, and press . INDICATOR:This menu item enables you to set the indicator on the thumbnail to...
Page 40
![Page 40
0
Clip management
Selecting clips
When performing operations on the thumbnail display screen, select the clip which will be the target of these operations as follows.
1 Using , , or , move the cursor (yellow frame) to the target clip.To move the cursor to left or right, use or .You can also use or by pressing and holding [ALT/3].To move the cursor up and down, use or by pressing and holding [ALT/3].This operation on the rest of the pages in this manual is referred to as “cross cursor...](http://img.usermanuals.tech/thumb/58/76177/w300_aghpg20_en_om_d-39.png "Page 40
0
Clip management
Selecting clips
When performing operations on the thumbnail display screen, select the clip which will be the target of these operations as follows.
1 Using , , or , move the cursor (yellow frame) to the target clip.To move the cursor to left or right, use or .You can also use or by pressing and holding [ALT/3].To move the cursor up and down, use or by pressing and holding [ALT/3].This operation on the rest of the pages in this manual is referred to as “cross cursor...")
0 Clip management Selecting clips When performing operations on the thumbnail display screen, select the clip which will be the target of these operations as follows. 1 Using , , or , move the cursor (yellow frame) to the target clip.To move the cursor to left or right, use or .You can also use or by pressing and holding [ALT/3].To move the cursor up and down, use or by pressing and holding [ALT/3].This operation on the rest of the pages in this manual is referred to as “cross cursor...