Panasonic Memory Card Camera Recorder Ajhpx3700g Operating Instructions

11General: Features of Recorder/Player unit
General

12General: Features of the Input/Output unit(Reference values when Panasonic bland SD memory cards 
or SDHC memory cards are used for continuous recording. 
Actual recording time depends on the kind of scenes and the 
number of clips.)
The values for 8 GB and 16 GB SDHC memory cards are 
double and four times the values for the 4 GB card.
For the latest information on P2 cards and SD memory cards 
not available in the operating instructions, visit the P2 
Support Desk at the following Web site....

13General: Dimensions drawing
General
Unit: mm (inch)
Dimensions drawing
137 (5-     )3
/
8
102 (4-      )
1
/
16
318 (12-     )1
/
2
209 (8-     )
1
/
4270.5 (10-     )
5
/
8
AJ-HPX3700G-VQT1V68_eng.book  13 ページ  ２００８年１０月１５日　水曜日　午後６時３８分 

14General: Color TV Standard Settings (Settings for frame frequency) The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the 
preferred standard, refer to the procedures described below.
1After connecting the unit to the power supply and then 
turning on the power, press the MENU button while 
pressing the LIGHT button to open OPTION MENU.
2Turn the jog dial button to move the cursor (arrow) to the 
AREA SELECT item on the  screen...

15General: System Configuration
General
* For the latest information on P2 cards and SD memory cards not available in the operating instructions, visit the P2 Support Desk at the 
following Web site.
https://eww.pavc.panasonic.co.jp/pro-av/

16Parts and their Functions: Power Supply and Accessory Mounting Section
Parts and their Functions
1. POWER switch
Used to turn on/off the power.
2. Battery mount
A battery pack from Anton/Bauer is mounted here.
3. DC IN (external power input) socket (XLR, 4P)
The unit is connected to an external DC power supply.
4. BREAKER switch
When an excessive amount of current is fed through the 
unit, due to any abnormal event, the breaker 
automatically turns off the power in order to protect the 
device.
After...

17Parts and their Functions: Audio (input) Function Section
Parts and their Functions
1. MIC IN (microphone input) jack (XLR, 5-pin)
A microphone (optional) is connected here. Power can 
be supplied via this jack to allow use of a phantom 
microphone. Note that the FRONT MIC POWER menu 
option must be set to “ON” when using a phantom 
microphone.
These options are found in the  screen 
on the MAIN OPERATION page.
2. AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 
recording level adjustment) controls
With the...

18Parts and their Functions: Audio (output) Function Section
9. AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on 
Channels 1/2 or 3/4.
Output signals are selected with the 10. MONITOR 
SELECT CH1/2 / CH3/4 selector switch.
10. MONITOR SELECT (audio channel selection) 
CH1/2 / CH3/4 selector switch
Use this switch to select the audio channel whose 
signals are output to the speakers, earphones or AUDIO 
OUT connector.
CH1/2:Signals on audio channels 1 and 2 are output....

19Parts and their Functions: Shooting and Recording/Playback Functions Section
Parts and their Functions
1. CC/ND FILTER (filter switching) controls
These are used to select the filter in accordance with the 
subject’s brightness and color temperature.
When D (1/2 ND) is selected on CC FILTER, it is 
possible to select any of 1/2 ND to 1/128 ND in 
combination with ND FILTER.
2. USER MAIN, USER 1 and USER 2 buttons
These buttons can be assigned user-selected functions, 
using a menu option. Each button,...

20Parts and their Functions: Shooting and Recording/Playback Functions Section
5. GAIN selector switch
Use this switch to select video amplifier gain, according 
to lighting conditions under which you are shooting.
The values for [L], [M], and [H] can be preset using 
menu options.
These are factory-set to “0 dB” for [L], “3 dB” for [M], and 
“6 dB” for [H].
6. OUTPUT/AUTO KNEE selector switch
Used to select the video signals sent from the camera 
unit to the memory, viewfinder and video monitor....