Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

11GeneralFeatures of the Input/Output unit
 General
(Reference values when cards are used for continuous
recording with our products. Actual recording time depends
on the kind of scenes and the number of clips.)
The driver installed on the unit must be updated when
using SD memory cards other than as listed above. To
update the driver, refer to [Updating the firmware
incorporated into the camera-recorder] (page 193)
For the latest information on P2 cards and SD memory
cards not available in the...

12GeneralOther features
_Viewfinder connection
From the viewfinder connector of the unit, 1080-59.94i,
1080-50i, 480-59.94i or 576-50i signals are output.
Furthermore, signals are output for switching the
frequencies of the connected viewfinder.
Confirm images in multi formats by connecting the
viewfinder (AJ-HVF21G), which is available as an
optional accessory. (Refer to page 28)
While the AJ-VF20WBP (59.94 Hz)/E (50 Hz) can also
be connected, you cannot view video in formats with
different...

13GeneralColor TV Standard Settings (Settings for frame frequency)
 General
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the 
preferred standard, refer to the procedures described below.
1After connecting the unit to the power supply and then
turning on the power, press the MENU SW button while
pressing the LIGHT SW button to open OPTION
MENU.
2Turn the JOG dial button to move the cursor (arrow) to
the AREA SELECT item on...

14GeneralSystem Configuration
* For the latest information on P2 cards and SD memory cards not available in the operating Instructions, visit the P2 
Support Desk at the following Web sites.
https://eww.pavc.panasonic.co.jp/pro-av/
System Configuration
Lens:
(Bayonet type)
Fujinon, Canon
Viewfinder:
AJ-VF15B
AJ-VF20WB
Rain cover:
SHAN-RC700
Soft carrying case:
AJ-SC900
Hard carrying case:
AJ-HT901G
Unislot wireless 
microphone receiver:
Sennheiser EK3041
External DC 
power supply
NP-1 type 
Battery...

15Parts and their FunctionsPower Supply and Accessory Mounting Section
 Parts and their Functions
1.POWER switch
Used to turn on/off the power.
2.Battery mount
A battery pack from Anton/Bauer is mounted here. 
3.DC IN (external power input) socket (XLR, 4P)
camera-recorder is connected to an external DC
power supply.
4.BREAKER switch
When an excessive amount of current is fed through
the camera-recorder, due to any abnormal event, the
breaker automatically turns off the power in order to
protect the...

16Parts and their FunctionsAudio (input) Function Section
1.MIC IN (microphone input) jack (XLR, 5-pin)
A microphone (optional accessory) is connected here.
Power for the microphone comes from this jack.
A remote microphone may be connected. When a
microphone is used, set the power to ON through the
menu option FRONT MIC POWER. 
These options are found in the  screen
on the MAIN OPERATION page. 
2.AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 
recording level adjustment) controls
With the 3. AUDIO SELECT...

17Parts and their FunctionsAudio (output) Function Section
 Parts and their Functions
9.AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4. 
Output signals are selected with the MONITOR
SELECT  CH1/2 / CH3/4 selector switch.
10.MONITOR SELECT (audio channel) CH1/2 / 
CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or
AUDIO OUT connector.
CH1/2:Signals on Audio Channels 1 and 2 are...

18Parts and their FunctionsShooting and Recording/Playback Functions Section
1.CC FILTER/ND FILTER (filter switching) 
controls
These are used to select the filter in accordance with
the subject’s brightness and color temperature.
CC FILTER knob (outside, large diameter)
A : 3200K B : 4300K
C : 5600K D : 6300K
ND FILTER knob (inside, small diameter)
1 : CLEAR (transparent) 2 : 1/4 ND
3 : 1/16 ND 4 : 1/64 ND
2.USER MAIN, USER 1 and USER 2 buttons
These buttons can be assigned user-selected
functions,...

19Parts and their FunctionsShooting and Recording/Playback Functions Section
 Parts and their Functions
5.Gain selector switch
Use this switch to select video amplifier gain,
according to lighting conditions under which you are
shooting.
The values for L, M, and H can be preset using menu
options.
These are factory-set to 0 dB for L, 6 dB for M, and 12
dB for H.
6.OUTPUT/AUTO KNEE selector switch
Used to select the video signals sent from the camera
unit to the memory, viewfinder and video monitor....

20Parts and their FunctionsShooting and Recording/Playback Functions Section
14.SAVE ON/OFF switch 
Used to select the power supply method for each
output section.
ON:The output selected through the menu option
SAVE SW is power-saved. This option can be
found on the OPTION MODE screen on the
SYSTEM SETTING page.
OFF:Power saving is canceled. 
‹Note
The ON/OFF switch does not function during record-
ing. The ON/OFF status changes after recording is
completed. 
15.VIDEO OUT (output signal selector)...