Panasonic Memory Card Camera Recorder Ajhpx2000 Operating Instructions

11GeneralFeatures of the Input/Output unit
 General
_Features USB2.0 port (HOST/DEVICE)
By connecting with a PC via USB2.0, a P2 card inserted
in AJ-HPX2000 can be used as a bulk storage device.
It is also possible to store data on a P2 card onto a USB
2.0-connected external hard disk equipped with USB
host capability as well as view clips stored on hard disks
and write them to P2 cards.
_DVCPRO (IEEE1394) output and DV output 
provided as a standard configuration
Data can be input/output to an...

12GeneralDimensions drawing
Unit: mm (inch)
Dimensions drawing
209 (8-     )
270.5 (10-     )
318 (12-     )
102 (4-      )
137 (5-     )3
/
8
1
/
16
1
/
2
1
/
4
5
/
8
AJ-HPX2000P(VQT1D27-1)E.book  12 ページ  ２００７年７月３０日　月曜日　午後１時３１分 

13GeneralSystem Configuration
 General
* For the latest information on P2 cards and SD memory cards not available in the operating Instructions, visit the P2 
Support Desk at the following Web sites.
https://eww.pavc.panasonic.co.jp/pro-av/
System Configuration
AVC-Intra codec board:
AJ-YBX200G
Lens:
(Bayonet type)
Fujinon, Canon
Viewfinder:
AJ-VF15B
AJ-VF20WB
Rain cover:
SHAN-RC700
Soft carrying case:
AJ-SC900
Hard carrying case:
AJ-HT901G
Unislot wireless 
microphone receiver:
Sennheiser EK3041...

14Parts and their FunctionsPower Supply and Accessory Mounting Section
1.POWER switch
Used to turn on/off the power.
2.Battery mount
A battery pack from Anton/Bauer is mounted here. 
3.DC IN (external power input) socket (XLR, 4P)
camera-recorder is connected to an external DC
power supply.
4.BREAKER switch
When an excessive amount of current is fed through
the camera-recorder, due to any abnormal event, the
breaker automatically turns off the power in order to
protect the device. 
After the interior...

15Parts and their FunctionsAudio (input) Function Section
 Parts and their Functions
1.MIC IN (microphone input) jack (XLR, 5-pin)
A microphone (optional accessory) is connected here.
Power for the microphone comes from this jack.
A remote microphone may be connected. When a
microphone is used, set the power to ON through the
menu option FRONT MIC POWER. 
These options are found in the  screen
on the MAIN OPERATION page. 
2.AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 
recording level adjustment) controls...

16Parts and their FunctionsAudio (output) Function Section
9.AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4. 
Output signals are selected with the MONITOR
SELECT  CH1/2 / CH3/4 selector switch.
10.MONITOR SELECT (audio channel) CH1/2 / 
CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or
AUDIO OUT connector.
CH1/2:Signals on Audio Channels 1 and 2 are output. 
CH3/4:Signals on...

17Parts and their FunctionsShooting and Recording/Playback Functions Section
 Parts and their Functions
1.CC/ND FILTER (filter selector) control
Used to select a filter appropriate for illumination and
color temperature of the subject. 
When the menu option DISP MODE is set to “3”,
switching this control displays the selected filter
number in the viewfinder.
2.USER MAIN, USER 1 and USER 2 buttons
These buttons can be assigned user-selected
functions, using a menu option. Each button, when
pressed,...

18Parts and their FunctionsShooting and Recording/Playback Functions Section
5.Gain selector switch
Use this switch to select video amplifier gain,
according to lighting conditions under which you are
shooting.
The values for L, M, and H can be preset using menu
options.
These are factory-set to 0 dB for L, 6 dB for M, and 12
dB for H.
6.OUTPUT/AUTO KNEE selector switch
Used to select the video signals sent from the camera
unit to the memory, viewfinder and video monitor.
CAM. AUTO KNEE ON:
Video being...

19Parts and their FunctionsShooting and Recording/Playback Functions Section
 Parts and their Functions
14.SAVE ON/OFF switch 
Used to select the power supply method for each
output section.
ON:The output selected through the menu option
SAVE SW is power-saved. This option can be
found on the OPTION MODE screen on the
SYSTEM SETTING page.
OFF:Power saving is canceled. 
‹Note
The ON/OFF switch does not function during record-
ing. The ON/OFF status changes after recording is
completed. 
15.VIDEO OUT...

20Parts and their FunctionsShooting and Recording/Playback Functions Section
20.REW (rewind) button and lamp
During pause, this button performs a fast-reverse
playback with the lamp blinking.
During playback, it performs an approximately 4
a fast-
reverse playback with the PLAY and REW lamps
blinking.
If this button is pressed when playback is paused, the
start of the clip being played back is located in pause
mode. 
21.STOP button
This button stops playback.
22.FF (fast forward) button and lamp
During...