Panasonic Memory Card Camera Recorder AG-HVX200AP Operating Instructions

Menu
111
Audio recording mode 32K(12bit) AUDIO 
setting AUDIO OUT setting AUDIO IN/OUT jack
CH1 output AUDIO IN/OUT jack
CH2 output
32K (12bit) ST1
CH1 · CH2
CH1
CH2 CH1
CH1
CH2CH2
CH1
CH2
ST2 CH1 · CH2
CH1
CH2 CH3
CH3
CH4CH4
CH3
CH4
MIX — CH1+CH3 CH2+CH4
48K (16bit) —CH1 · CH2
CH1
CH2 CH1
CH1
CH2CH2
CH1
CH2
32K(12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from the AUDIO IN/OUT 
jack TA P E 
PLAYBACK FUNCTIONS screen (continued) 

112
Setup menu list (continued)
DUBBING SETUP screen
AV IN/OUT SETUP screen
ItemDisplay 
mode Description of settings
CMPNT OUT SEL
P2(Camera)
(MCR) Selects the type of component terminal.
720P: 
Monitor which supports the D4 terminal
1080i:  Monitor which supports the D3 terminal
480i:  Monitor which supports the D1 terminal
The signals recorded in the 720P format are cross-converted only when 1080i 
format signals are to be output. In all other cases, they are output without being 
converted.
HP MODE...

Menu
113
ItemDisplay 
mode Description of settings
ZEBRA DETECT 1
P2 TA P E(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
ZEBRA DETECT 2
P2 TA P E(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF

•  The zebra patterns do not appear if you select OFF.
MARKER
P2 TA P E(Camera) Select ON to display the...

114
Setup menu list (continued)
ItemDisplay 
mode Description of settings
ZOOM · FOCUS
P2 TA P E(Camera) Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m

Use the mm/feet or mm/m display only as a general guideline since it is not 
entirely accurate.
CARD/TAPE · BATT
P2 TA P E(Camera)
(MCR/
VCR) Select ON to display the remaining card/tape and battery charge.
ON OFF
OTHER DISPLAY
P2 TA P E  (Camera)
(MCR/
VCR) Select how much information to display on the screen. (Page 96)
OFF,...

Menu
115
ItemDisplay 
mode Description of settings
SCENE FILE
P2  (Camera)
You can save four SCENE FILE settings to the SD memory card, and can also 
title the saved files.
READ: Read
WRITE:  Write
USER FILE
P2  (Camera)
You can save four file settings (excluding SCENE FILE) to the SD memory 
card, and can also title the saved file.
READ: Read
WRITE:  Write
SD CARD FORMAT
P2  (Camera)
Formats the SD memory cards.
CARD FUNCTIONS screen
Item Display 
mode Description of settings
REMOTE
P2 TA P E...

116
Setup menu list (continued)
ItemDisplay 
mode Description of settings
END SEARCH
TA P E(Camera)
(VCR) Sets the operation when the END SEARCH button is pressed.
BLANK: 
Searches for the unrecorded parts on the tape.
REC END:  Searches for the last segment shot.
PC MODE
P2  (Camera)
(MCR)Selects the terminal for data transfer. (You cannot select USB and 1394 at the 
same time.)
USB DEVICE: 
  Mode for sending files using the USB connector.
1394 DEVICE: 
  Mode for sending files using the 1394...

Menu
117
ItemDisplay 
mode Description of settings
TIME ZONE
P2 TA P E  (Camera)
(MCR/
VCR) Adds to or deducts from GMT the time value of -12:00 to +13:00 in 30-minute
steps. (As an exception, you can set +12:45.) Refer to the table below.
0:00
OTHER FUNCTIONS screen (continued)
        indicates the factory setting.
Time 
difference AreaTime 
difference Area
00:00 Greenwich – 00:30
– 01:00 Azores Islands – 01:30
– 02:00 Mid-Atlantic – 02:30
– 03:00 Buenos Aires – 03:30 Newfoundland Island
– 04:00...

118
Setup menu list (continued)
ItemDisplay 
mode Description of settings
POWER SAVE
P2 TA P E  (Camera)
Selects the power-saving mode when the top panel operation keys, DISP/
MODE CHK button, USER1-3 buttons and EVF DTL button have not been 
operated for 5 minutes or so.
ON:
  The camera-recorder’s power is set to OFF.
OFF:
  The cylinder head remains stopped without turning off the camera-recorder’s 
power.
•  When connection is made with an external device using the IEEE1394 cable  and the...

Menu
119
ItemDisplay 
mode Description of settings
1394 STATUS
P2 TA P E  (Camera)
(MCR/
VCR) 1394 status display screen appears.
•  When a P2 card is used
 
FORMAT:  Format of the signals which are input or output.
  RATE:  Transfer rate of the signals which are input or output.
  60/50:  System of the signals which are input or output.
  CH:  Value of the channels in which the signals are input or output.
  SPEED:  Transfer speed of the signals which are input or output.
  STATUS:   Status of the...

120
Before calling for service
Power supply
There’s no power.•  Make sure the battery and AC adapter are connected properly.
Check the connections again.  P 17
Power shuts off for no 
apparent reason.  •  To prevent the battery from running down needlessly and to 
safeguard the tape from wear, the camera-recorder automatically 
turns off when the camera-recorder has been left in the shooting 
pause mode for more than 5 minutes.
  Check the settings in the OTHER FUNCTIONS screen, POWER  SAVE.  P 118...