Home
>
Panasonic
>
Camcorder
>
Panasonic Memory Card Camera Recorder AG-HMC70P Operating Instructions
Panasonic Memory Card Camera Recorder AG-HMC70P Operating Instructions
Here you can view all the pages of manual Panasonic Memory Card Camera Recorder AG-HMC70P Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
71 Playback Still picture (JPEG) playback Play back the still pictures recorded on the card. 1Rotate the mode dial to select . 2Press the cursor button up and then right to select the (still picture playback) tab. AStill picture playback tab The still pictures recorded on the SD card are displayed as thumbnails (reduced-size images). 3Select the file to be played back. BPrevious page CNext page DFile number display EFolder/file name The selected file will be encircled by a yellow frame.≥If 9 or...
Page 72
72 Playback ªAbout still picture compatibility ≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥If a non-standard file is played back, the folder/ file name may not be displayed. ≥This unit may degrade or not play back data recorded or created on other products and...
Page 73
![Page 73
73
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬
Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
¬Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-72.png "Page 73
73
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬
Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
¬Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL...")
73 Editing Editing Editing scenes The deleted scenes cannot be restored. ¬ Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the center of the cursor button. ¬Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL...
Page 74
![Page 74
74
Editing
The selected scene is encircled by a red
frame.
≥When the cursor button is pressed again,
the selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the center of the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-73.png "Page 74
74
Editing
The selected scene is encircled by a red
frame.
≥When the cursor button is pressed again,
the selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the center of the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be...")
74 Editing The selected scene is encircled by a red frame. ≥When the cursor button is pressed again, the selected scene will be canceled. ≥Up to 50 scenes can be set in succession. 4(Only when [SELECT] is selected in step 2) Press the button. 5When the confirmation message appears, select [YES], then press the center of the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5. To complete editing Press the MENU button. ≥Scenes which cannot be...
Page 75
![Page 75
75
Editing
Editing still pictures
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
¬Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-74.png "Page 75
75
Editing
Editing still pictures
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
¬Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL...")
75 Editing Editing still pictures The deleted files cannot be restored. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the center of the cursor button. ¬Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL...
Page 76
![Page 76
76
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the center of the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected files cannot be...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-75.png "Page 76
76
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the center of the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected files cannot be...")
76 Editing 4(Only when [SELECT] is selected in step 2) Press the button. 5When the confirmation message appears, select [YES], then press the center of the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ªDeleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥Protected files cannot be...
Page 77
![Page 77
77
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the center of the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to select...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-76.png "Page 77
77
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the center of the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to select...")
77 Editing You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the center of the cursor button. 2Select the file to be set and then press the center of the cursor button. The number of prints set to be in DPOF is displayed. 3Move the cursor button up or down to select...
Page 78
![Page 78
78
Card management
Card management
Formatting
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer etc.
¬
Rotate the mode dial to select or
.
1Press the MENU button, then
select [SETUP]
#
[FORMAT CARD] # [YES] and
press the center of the cursor
button.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
≥When formatting is complete, press the
MENU button to...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-77.png "Page 78
78
Card management
Card management
Formatting
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer etc.
¬
Rotate the mode dial to select or
.
1Press the MENU button, then
select [SETUP]
#
[FORMAT CARD] # [YES] and
press the center of the cursor
button.
2When the confirmation message
appears, select [YES], then press
the center of the cursor button.
≥When formatting is complete, press the
MENU button to...")
78 Card management Card management Formatting Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select or . 1Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the center of the cursor button. 2When the confirmation message appears, select [YES], then press the center of the cursor button. ≥When formatting is complete, press the MENU button to...
Page 79
79 With other products With other products With a TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals. Optional connection cables are required to connect to the respective terminals. ¬ Difference in picture quality depending on the terminal used for connection AHigh quality BStandard quality CHDMI terminal DComponent terminal EVideo terminal ≥Use the AC adaptor to free you from worrying...
Page 80
![Page 80
With other products
80
1Connect this unit and a TV with the HDMI cable (optional).
Use a HDMI cable (optional) A with the logo shown above.
2Set the mode dial to to turn on the power.
3Select the input channel on the TV.
Example: Select the [HDMI] channel etc.
(The name of the channel may differ depending on the connected TV.)
4Start playback on this unit.
The image and audio are output on the TV.
ªIf the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as...](http://img.usermanuals.tech/thumb/58/76174/w300_aghmc70p_en_om_d-79.png "Page 80
With other products
80
1Connect this unit and a TV with the HDMI cable (optional).
Use a HDMI cable (optional) A with the logo shown above.
2Set the mode dial to to turn on the power.
3Select the input channel on the TV.
Example: Select the [HDMI] channel etc.
(The name of the channel may differ depending on the connected TV.)
4Start playback on this unit.
The image and audio are output on the TV.
ªIf the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as...")
With other products 80 1Connect this unit and a TV with the HDMI cable (optional). Use a HDMI cable (optional) A with the logo shown above. 2Set the mode dial to to turn on the power. 3Select the input channel on the TV. Example: Select the [HDMI] channel etc. (The name of the channel may differ depending on the connected TV.) 4Start playback on this unit. The image and audio are output on the TV. ªIf the image or audio from this unit is not output on the TV ≥Check that the plugs are inserted as far as...