Panasonic Memory Card Camera Recorder AG-AF100AP Operating Instructions

							51
Displays
Menu
Setup menu list
SCENE FILE screen
ItemDisplay 
mode Description of settings
SCENE 
SELECT (Camera)
Selects the settings (SCENE FILES) according to the variety of shooting 
circumstances. 
You can read, save, and initialize these settings from MENU - SCENE FILE - 
LOAD / SAVE / INIT. 
F1, F2, F3, F4, F5, 
F6
OPERATION 
TYPE (Camera)
Switches the shutter and frame rate operation to video type or film type.
FILM CAM:   VFR operation is enabled. SLOW shutter speeds are disabled. 
SYNCHROSCAN is displayed as an angle. Gain is displayed as ISO. 
VIDEO CAM:   
VFR operation is disabled. SLOW shutter speeds are enabled. 
SYNCROSCAN is displayed as 1/n. Gain is displayed as dB. 
REC FORMAT (Camera)
Selects the recording format.
When SYSTEM FREQ = 59.94 Hz
PH 1080/24P and PH 720/24P represent native recording.
PS 1080/60P, PH 1080/60i, PH 1080/30P, PH 1080/24P , PH 720/60P, PH 
720/30P, PH 720/24P, HA 1080/60i, HE 1080/60i
When SYSTEM FREQ = 50 Hz
PS 1080/50P, PH 1080/50i, PH 1080/25P, PH 720/50P, PH 720/25P, HA 
1080/50i, HE 1080/50i
VFR MODE (Camera)
ON:   Enables the VFR (Variable Frame Rate) mode.
OFF:    Disables the VFR mode.
Functions only when REC FORMAT is set to 1080/24P, 1080/30P, or 1080/25P.
Functions only when OPERATION TYPE = FILM CAM
Does not function when SDI 24PsF is set to ON.
Audio cannot be recorded when VFR MODE = ON.
FRAME RATE (Camera)
Sets the FRAME RATE.
Operates when VFR MODE is set to ON.
You can make the settings from SHUTR/F.RATE on the rear side of the camera 
also. 
When SYSTEM FREQ = 59.94 Hz
12/15/18/20/21/22/ 24/25/26/27/28/30/32/34/36/40/44/48/54/60
When SYSTEM FREQ = 50 Hz
12/15/18/20/21/22/23/24/25/26/27/28/30/32/34/37/42/45/48/50
         indicates the factory setting. 
						

							52
Setup menu list (continued)
SCENE FILE screen (continued)
ItemDisplay 
mode Description of settings
SYNCRO 
SCAN (Camera)
Adjusts the synchro scan shutter speed used for shooting images on a 
TV 
screen, etc. 
Holding the OPERATION lever toward the 
 or  will cause the values to change 
at a faster rate. 
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz
•  60P/60i: 
1/60.0…1/250.6
•    30P: 
1/30.0…1/48.0…1/250.6
•    24P: 
1/24.0…1/48.0…1/250.6
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz• 50P/50i: 
1/50.0…1/250.0
•  25P: 
1/25.0…1/48.0…1/250.0
When OPERATION TYPE = FILM CAM, “deg (angle)” Display
  10.0d…172.8d…180.0d…360.0d (0.5d/div)
DETAIL LEVEL (Camera)
Adjusts the level of the image outline correction (in the horizontal and vertical directions). -7…0…+7
V DETAIL 
LEVEL (Camera)
Adjusts the level of outline correction in the vertical direction. 
-7…0…+7
DETAIL 
CORING (Camera)
Adjusts the level of noise reduction of the detail signal. 
Set to – for a clearer image. Noise increases slightly. 
Set to + to reduce noise. 
-7…0…+7
CHROMA 
LEVEL (Camera)
Adjusts the chroma level.
-7…0…+7
CHROMA 
PHASE (Camera)
Adjusts the chroma phase.
-7…0…+7
COLOR TEMP 
Ach (Camera)
Make fine adjustments to the color temperature (after white balance Ach adjustment).-7…0…+7
COLOR TEMP 
Bch (Camera)
Make fine adjustments to the color temperature (after white balance Bch adjustment). -7…0…+7
MASTER PED (Camera)
Adjusts the master pedestal (black level of the image) as the basis for images. 
-15…0…+15
A.IRIS LEVEL (Camera)
Sets the desired AUTO IRIS level.
-6…0…+6
DRS (Camera)
Selects the DRS (Dynamic Range Stretcher) function.  It enables the dynamic 
range to be expanded by compressing the level of the video signals in the high-
brightness areas where overexposure results during normal shooting.
OFF
, 1, 2, 3
•  The higher the number of the setting, the higher the compression level of the 
high-brightness areas. 
•  The higher the number of the setting, the greater the interference in darker areas.
         indicates the factory setting. 
						

							53
Menu
 
ItemDisplay 
mode Description of settings
GAMMA (Camera)
Selects the gamma curves. 
HD NORM: 
This gamma setting is suitable for HD shooting. 
LOW:      Makes a mellow image using the gamma curve that has a gentle 
incline in low-brightness curve. The contrast sharpens.
SD NORM:   
This is the normal video setting carried over from the DVX100 series.HIGH:      Expands the tone of dark parts and makes a brighter image using the 
gamma curve that has a sharp incline in low-brightness curve. The 
contrast softens.
B.PRESS:   Makes the contrast sharper than LOW. CINE-LIKE D: Uses a gamma curve designed to create cinema-like images. CINE-LIKE V:   Uses a gamma curve designed to create cinema-like images with 
emphasized contrast.
•  When you select CINE-LIKE gamma, we recommend setting the lens aperture 
lower than normal image level (approximately 1/2) for optimal results. 
KNEE (Camera)
To avoid overexposure, select the compression level (knee point) of the high 
intensity video signals received through the image pickup device. 
AUTO: 
Sets the level automatically according to the received signals.
LOW:  Low setting (Compression starts at approx. 80%)
MID:  Medium setting (Compression starts at approx. 90%)
HIGH:  High setting (Compression starts at approx. 100%)
•  Not available when a DRS value is set, or when GAMMA is set to CINE-LIKE. 
MATRIX (Camera)
Selects the MATRIX table suitable for the desired color expression during shooting.NORM1:  Suitable for shooting in the open air or under a halogen lamp.NORM2:  
Suitable for brighter colors than the NORM1 mode.
FLUO:    Suitable for shooting under fluorescent lights indoors.
CINE-LIKE:  Suitable for cinema-like images.
SKIN TONE 
DTL (Camera)
Switches skin tone details ON or OFF. Select ON to reduce the skin tone details 
and soften the skin tone.
ON, OFF
B/W MODE (Camera)
Selects the black and white shooting function. 
All recorded and output video signals are converted to black and white.
Color temperature adjustment modes, such as AWB, operate even when the B/W 
MODE is ON and affect the black and white images.
It is recommended that you set the B/W MODE to ON after adjusting and 
checking the white balance when the B/W MODE is OFF. 
ON, OFF
CARD READ (Camera)
Reads scene files from the SD Memory Card.
Slot1:   
Reads scene files (all scenes from F1 to F6) saved on the SD Memory 
Card of Slot 1 after selecting the setting values.
Slot2:    Reads scene files (all scenes from F1 to F6) saved on the SD Memory 
Card of Slot 2 after selecting the setting values.
NO:   Returns to the previous screen.
CARD WRITE (Camera)
Saves scene files on the SD Memory Card.
Slot1:   
Saves the setting values of scene files (all scenes from F1 to F6) on the 
SD Memory Card of Slot 1.
Slot2:    Saves the setting values of scene files (all scenes from F1 to F6) on the 
SD Memory Card of Slot 2.
NO:   Returns to the previous screen.
        indicates the factory setting.
SCENE FILE screen (continued) 
						

							54
Setup menu list (continued)
SCENE FILE screen (continued)
ItemDisplay 
mode Description of settings
LOAD/SAVE/
INIT (Camera)
LOAD: 
Loads the scene file settings saved by this camera. 
SAVE:  Saves the updated scene file settings.
INIT:    Returns the settings of the scene file selected from the SCENE FILE 
item to factory settings. 
NO:   Returns to the previous screen.
NAME EDIT (Camera)
Edits the name of the scene file selected from the MENU/SCENE FILE/SCENE SELECT. YES, NO
       
 indicates the factory setting.
SW MODE screen
Item Display 
mode Description of settings
FUNCTION 
KNOB (Camera)
Sets the function assigned to the AREA operation of the FUNCTION KNOB.
INH:   
No function is assigned.
FOCUS:   AUTO FOCUS / FOCUS BAR function
IRIS:    AUTO IRIS / IRIS METER function
YGET:    YGET (Luminance measurement) function
FOCUS/IRIS:  Simultaneous operation of FOCUS and IRIS described above
FOCUS/YGET:  Simultaneous operation of FOCUS and YGET described above
LOW GAIN (Camera)
Sets the gain value assigned to the L position of the GAIN switch. 
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, 
ISO400, ISO500, ISO640, ISO800, ISO1000, 
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
MID GAIN (Camera)
Sets the gain value assigned to the M position of the GAIN switch.
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, 
ISO400, ISO500, ISO640, ISO800, ISO1000, 
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB,  6dB, 9dB, 12dB, 15dB, 18dB
HIGH GAIN (Camera)
Sets the gain value assigned to the H position of the GAIN switch. 
When OPERATION TYPE = FILM CAM
ISO200, ISO250, ISO320, 
ISO400, ISO500, ISO640, ISO800, ISO1000, 
ISO1250, ISO1600, ISO2000, ISO2500, ISO3200
When OPERATION TYPE = VIDEO CAM
-6dB, -3dB, 0dB, 3dB, 6dB, 9dB,  12dB, 15dB, 18dB
ATW (Camera)
Sets the operation of the ATW (Auto Tracking White) function assigned to the 
WHITE BAL switch. When the ATW function is allocated to the USER button, the 
operation remains effective. 
Ach:   
Activates the ATW function when the WHITE BAL switch is set to A. Bch:   
Activates the ATW function when the WHITE BAL switch is set to B. 
PRST:    Activates the ATW function when the WHITE BAL switch is set to PRST. 
OFF :  Deactivates the ATW function. 
IRIS DIAL (Camera)
(PB)
Sets the rotation direction and aperture control of the IRIS dial. (In MANUAL
 IRIS 
mode)
DOWN OPEN:  The aperture opens when the IRIS dial is turned downward.
UP OPEN:   The aperture opens when the IRIS dial is turned upward. 
        indicates the factory setting. 
						

							55
Menu
 
ItemDisplay 
mode Description of settings
USER1 SW (Camera)
(PB)
Sets the function assigned to the USER1 button. INH:  
      No function is assignedREC CHECK:   Performs recording check.FACE DETECT:   This is the face detection function. Performs the AUTO IRIS / 
AUTO FOCUS operation centering around the detected face. 
Enabled when both focus control and iris control are set to 
auto.
IN RED:       Displays the edges in red. (Only for LCD/EVF) During 
operation, the LCD/EVF borders are displayed in red.
EXPAND:     The center of the screen is enlarged. (Only for LCD) The 
screen border of the LCD monitor turns blue in enlarged view.
CAPTURE:     Records still images. Does not operate during movie recording 
and when the PRE REC function is in use.
ATW:    Switches the ATW function ON or OFF.
ATW LOCK:     Fixes the white balance value when the button is pressed 
during ATW. Press again to perform ATW.
SHOT MARK:      Shot mark recording. (Page 13) Takes effect during recording, 
thumbnail display, and clip display. 
INDEX:      Index recording (Page 13) Takes effect during recording.
LAST CLIP:   Deletes the last recorded clip. (Page 13)
•  After recording, clips cannot be deleted by switching to PB or PC mode, by 
changing the recording format, or by turning off the camera. 
BACKLIGHT:    Auto iris control for the backlight compensation.SPOTLIGHT: Switches auto iris control ON or OFF for the spotlight.BLACKFADE: Blackfade (Page 11)WHITEFADE: Whitefade (Page 11)
USER2 SW (Camera)
(PB)
Assign a function to the USER2 button. 
The setting contents are the same as USER1.
ATW LOCK
USER3 SW (Camera)
(PB)
Assign a function to the USER3 button. 
The setting contents are the same as USER1.
REC CHECK
WFM (Camera)
Switches the waveform display that appears when the WFM button is pressed. 
WAVE:       
Displays as a waveform.
VECTOR:      Displays as a vector.
WAVE/VECTOR:   Each time the button is pressed, the setting changes in the 
following order: OFF → WAVE → VECTOR → OFF. 
S/S SW INH(Camera)1:   
Disables the START/STOP1 SW. 
2:    Disables the START/STOP2 SW. 
NO:   Does not disable any switch. Use to prevent erroneous operation of the 
unnecessary START/STOP SW. 
FACE 
FRAMING (Camera)
Frames the faces detected during operation of the FACE DETECT function with 
the USER SW. 
The maximum number of detected frames is 15, and faces bigger and closer to 
the center of the screen are given priority. 
OFF:     
Frames are not displayed.
PRIMARY:    Only the high-priority frames are displayed.
ALL:         Cannot be set when you are using INTERVAL REC. 
        indicates the factory setting.
SW MODE screen (continued) 
						

							56
Setup menu list (continued)
RECORDING SETUP screen
ItemDisplay 
mode Description of settings
PREREC 
MODE (Camera)
Sets PRE RECORDING to ON or OFF.
ON:    
Enables PRE REC function.
OFF :    Disables PRE REC function.
•  TCG is set to FREE RUN.
•  Cannot be set when you are using INTERVAL REC.
INTERVAL REC (Camera)
Scenes moving slowly over a long period of time are recorded as short movies 
by providing a recording interval. One frame is recorded in each recording time 
period that has been set, and 24 frames (PAL 25 frames) form a one-second 
video. When you set INTERVAL REC, the following items are set automatically:
PH Mode   
1080/24P (When SYSTEM FREQ = 59.94)  
1080/25P (When SYSTEM FREQ = 50)
•  TC RECRUN   Fixed to NDF
•  Audio recording is not performed. 
OFF , 1SECOND, 10SECONDS, 30SECONDS, 1MINUTE, 2MINUTES
RELAY REC (Camera)
ON:    
Relay recording performed. When the SD card used for recording has 
no remaining space, recording continues in another SD card if an SD 
card that can be used for recording is inserted in another SD card slot.
OFF :    Relay recording not performed. Recording stops when the target SD 
card has no remaining space.
PS/PH AUDIO 
MODE (Camera)
Selects the format of audio recording when REC FORMAT = PS or PH.
LINEAR PCM:   
Recording is performed in uncompressed LPCM.
Dolby Digital :   Recording is performed in Dolby Digital format.
•  Fixed to Dolby Digital for other than the PS or PH mode.
•  If LINEAR PCM is set, playback is not possible in our previous models, such as 
AG-HMR10.
MIC ALC (Camera)
ON:    
Enables mic level auto control.
OFF:    Disables mic level auto control.
Audio distortion can be reduced at high input levels. To adjust the recording level 
of audio signals (regardless of this setting), use the AUDIO control knobs. 
MIC GAIN1 (Camera)
Sets the input level of the external microphone connected to the INPUT
 1 
terminal. 
-50dB, -60dB
MIC GAIN2 (Camera)
Sets the input level of the external microphone connected to the INPUT
 2 
terminal. 
-50dB, -60dB
         indicates the factory setting. 
						

							57
Menu
 
TC/UB SETUP screen
ItemDisplay 
mode Description of settings
TC MODE (Camera)
Selects the correction mode of the internal time code when the time code of the 
internal time code generator is recorded. 
DF:   
Uses the drop frame mode.
NDF:  Uses the non-drop frame mode.
•  TC MODE is automatically set to NDF when you set recording frame rate of 
recording format to 24P. 
•  Takes effect only when SYSTEM FREQ = 59.94 Hz. PH 1080/24P and PH 
720/24P represent native recording. 
TCG (Camera)
Sets the mode in which you advance the internal time code generator
.
FREE RUN:    The time code is advanced regardless of the operation mode. A 
slight time error may occur when switching to PB mode if the frame 
rate is set to 24P.
REC RUN : The time code is advanced only when recording.
TC PRESET (Camera)
Sets the initial time code.
Set the frame value to 0 or a multiple of 4 when you set recording frame rate 
of recording format to 24P. If any other value is set, the recorded time code will 
mismatch. 
YES, NO
UB PRESET (Camera)
Sets the user information. 
YES, NO
EXT TC LINK (Camera)
Synchronizes the initial time code value during multi-camera shooting. (SLA
VE 
camera time codes are synchronized to the master internal TCG value.)
MASTER:   Sets the mode to master mode. 
SLAVE:      Sets the mode to slave mode. When the COUNTER RESET/TC 
SET button is pressed, input time codes are synchronized to the 
internal TCG.
NO:     Returns to the previous screen.
•  MASTER and SLAVE mode settings are in effect only when this menu is open. 
When the menu is closed, EXT TC LINK is automatically canceled. 
         indicates the factory setting. 
						

							58
Setup menu list (continued)
AV IN/OUT SETUP screen
ItemDisplay 
mode Description of settings
SDI OUT (Camera)
(PB)
Sets the video output from the SDI terminal. 
ON:    Video is output from SDI OUT.  At this point, simultaneous LCD display and 
EVF display is not supported. Close the LCD monitor when using EVF.
OFF
:  No video is output from SDI OUT. 
SDI & HDMI 
OUT SEL (Camera)
(PB)
Sets the output video format of the SDI&HDMI OUT terminal. 
1080i/720P:
 Output at the resolution set in REC FORMAT. 
DOWNCONV:    SDI is output at 480i, while HDMI is output at 480p. (When 
SYSTEM FREQ = 59.94) SDI is output at 576i, while HDMI is 
output at 576p. (When SYSTEM FREQ = 50)
PS MODE HDMI 
OUT SEL (Camera)
(PB)
Sets the video format of HDMI output in PS mode.
1080P:   
Outputs at 1080/60P, 1080/50P.
1080i:    Outputs at 1080/60i, 1080/50i.
•  Cannot be set when SDI OUT setting is ON. (Output is fixed to 1080i.)
•  Output is at 480P or 576P, when SDI & HDMI OUT SEL is set to DOWNCONV.
SDI 24PsF (Camera)
(PB)
Sets the video format output from SDI OUT to 24PsF.
ON:    
Operates only when REC FORMAT = 1080 24p. If this item is turned 
ON, the VFR operation is canceled. The HDMI output stops during 
24Psf output.
OFF :  SDI output is in the 1080 60i format.
•  This item is not available when SYSTEM FREQ = 50Hz.
SDI EDH (Camera)
(PB)
Sets superimposition of EDH on to the SDI output during SD SDI output.
ON:    
Superimposes EDH.
OFF:  Does not superimpose EDH.
DOWNCON 
MODE (Camera)
(PB)
Switches down-conversion output mode.SIDE CROP:   
Side-crop mode (Crops the left and right edges.) Images output 
from the A/V terminal may extend beyond the boundaries of the 
screen and may be partially invisible. This item cannot be selected 
when SDI & HDMI OUT SEL is set to DOWNCONV.
LETTER BOX:   Letterbox mode (Adds black bands at the top and bottom of the image.SQUEEZE:  Squeeze mode (Squeezes images horizontally.
HP MODE (Camera)
Selects the sound heard from the headphones. 
LIVE:   
The sound input from the microphone is output as is. This setting is 
selected when delays in the sound are annoying.
RECORDING:
    The sound in the status to be recorded (the sound synchronized with the 
images) is output. 
TEST TONE (Camera)
Sets test tone output to channels 1, 2, 3, and 4 when BARS setting is ON.
ON:    
Outputs the test tone.
OFF:  Does not output the test tone.
VIDEO SETUP (Camera)
(PB)
Sets the setup level of video signals.
0%:    VIDEO OUT terminal output and recording setup levels will both be set to 0%.7.5%A:   
VIDEO OUT terminal output setup level will be set to 7.5%, while 
recording setup level will be set to 0%. 
•  This item is not available when SYSTEM FREQ = 50Hz.
AUDIO OUT (Camera)
(PB)
Sets the audio signals to output from the AUDIO OUT terminal (A/V OUT).
CH1/CH2
: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
CH1:    CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
CH2:    CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
•  When an SD Memory Card containing 5.1 channel content recorded on another 
equipment is played back on the camera, it is down-mixed to 2 channels when 
output through the AUDIO OUT and headphone terminals.
         indicates the factory setting. 
						

							59
Menu
 
DISPLAY SETUP screen
ItemDisplay 
mode Description of settings
ZEBRA 
DETECT 1 (Camera)
Selects the brightness level of the right-leaning zebra patterns on the screen. 
50%, 55%, 60%, 65%, 70%, 75%, 
80%, 85%, 90%, 95%, 100%, 105%
ZEBRA 
DETECT 2 (Camera)
Selects the brightness level of the left-leaning zebra patterns on the screen. 
OFF, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 
100%, 105%
Y GET 
MARKER (Camera)
Sets the display of the marker used for displaying the luminance level to ON or 
OFF.  
Select ON to display the marker by pressing the ZEBRA button.
ON, OFF
SAFETY ZONE (Camera)
Sets the SAFETY ZONE. 
90%: 
90% display at 16:9
4:3:   100% display at 4:3
14:9:  100% display at 14:9
1.85:1:  100% display t 1.85:1
2:1:   100% display at 2:1
2.35:1:  2.35:1 cinemascope display
2.39:1:  2.39:1 cinemascope display
GRID:  16:9 angular field of view with nine grid lines
OFF:  The SAFETY ZONE is not displayed.
CENTER 
MARKER (Camera)
Sets the CENTER MARKER. Select ON to display the CENTER MARKER.
ON, OFF
FOCUS BAR (Camera)
Sets the FOCUS ASSIST bar display to ON or OFF. Select ON to display the 
FOCUS ASSIST bar.
ON, OFF
REC COUNTER (Camera)
Selects counter operation during recording. 
TOTAL:   
The count continues to increase until the COUNTER RESET button is 
pressed to reset it.
CLIP:    Resets the counter at start of recording and counts the time of each 
recording session.
•  In the PB mode, the operation is always in CLIP mode. 
VIDEO OUT 
OSD (Camera)
(PB)
Select ON to output the information displayed on the screen together with the 
signals from the VIDEO OUT jack.
ON, OFF
• 
Some items are not output from the A/V terminal.
IRIS METER (Camera)
Sets the display of the IRIS METER. 
ON:    
As regards the brightness of the image, displays the difference with 
respect to the optimum value judged by the camera. The bar appears 
on the right: The image is too bright. The bar appears on the left:: The 
image is too dark. 
OFF:  The IRIS METER is not displayed.
DATE/TIME (Camera)
(PB)
Sets whether to display the date and time on the screen and whether to output 
from the VIDEO OUT jack.
OFF
:  The date and time are not displayed. 
TIME:    The time is displayed. 
DATE:    The date is displayed.
TIME  & DATE:  The date and time are displayed.
DATE FORMAT (Camera)
(PB)
Changes the style of displaying the year, month, and day.
Y-M-D: 
Year/Month/Day
M-D-Y:  Month/Day/Year
D-M-Y:  Day/Month/Year
        indicates the factory setting. 
						

							60
Setup menu list (continued)
ItemDisplay 
mode Description of settings
LEVEL METER (Camera)
(PB)
Select ON to display the audio level meter.
ON, OFF
ZOOM & 
FOCUS (Camera)
Selects the unit of zoom and focus values.
OFF, NUMBER, mm/m, mm/feet
• 
Use the mm/feet or mm/m display only as a general guideline because it is not 
entirely accurate. 
•  When you are using a lens that has no communication connection between 
the camera and lens through the use of a mount adaptor, the zoom and focus 
values are not displayed. 
CARD & 
BATTERY (Camera)
(PB)
Select ON to display the remaining SD Memory Card recording capacity and 
remaining battery charge. 
ON, OFF
OTHER 
DISPLAY (Camera)
Select how much information to display on the viewfinder and LCD monitor
.
OFF, PARTIAL, ALL
LCD 
BACKLIGHT (Camera)
(PB)
Adjusts the backlight of the LCD monitor.
+1, 0, - 1, - 2, - 3
+1:  
The backlight becomes brighter.
- 3:  The backlight becomes the darkest.
LCD SET (Camera)
(PB)Adjusts the display level of images on the LCD monitor.
BRIGHTNESS
COLOR
CONTRAST
EVF SET (Camera)
(PB)Adjusts the display level of images on the viewfinder. 
BRIGHTNESS
COLOR
CONTRAST
SELF SHOOT (Camera)
Selects the LCD mirror mode for self-portrait shooting.
Selecting MIRROR displays the left and right side of the LCD monitor image 
inverted during self-portrait shooting.
NORMAL, MIRROR
EVF MODE (Camera)
(PB)
Switches the screen display of images. 
AUTO:   
If you open the LCD monitor, images on the viewfinder disappear. 
ON:    Images are always displayed on the viewfinder.
•  When SDI OUT = ON, regardless of this item, AUTO settings are operated 
forcibly. 
EVF COLOR (Camera)
(PB)
Switches viewfinder images to color or black and white. 
ON:    
Color
OFF:    Black and white
         indicates the factory setting.
DISPLAY SETUP screen (continued)