Panasonic Memory Card Camera Recorder AG-AC90P AG-AC90PJ AG-AC90PX Operating Instructions

21VQT4M90
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping...

22VQT4M90
Connecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always 
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, 
do not use the AC cable from other equipment with this unit.
(AG-AC90P/PJ)
A AC cable (K2CB2CB00022; supplied)...

23VQT4M90
The unit can record motion pictures or still pictures to an SD card.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion 
picture recording.
≥Please check the latest information on the support website below.
http://pro-av.panasonic.net
≥ Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1Open the SD card slot cover and 
insert...

24VQT4M90
Set the power switch to ON while pressing the lock release button B to turn on 
the unit.
A The status indicator lights on.
≥To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the 
power switch to OFF once, and then to ON again.
Operate the mode switch to change the mode to   or  .
Preparation
Turning the unit on/off
Preparation
Selecting a mode
Recording Mode ( l30)
Playback Mode ( l35)

To turn off the unitSet the power switch to OFF while 
pressing the...

25VQT4M90
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted. 
The viewfinder is turned on when the LCD monitor is retracted.
Using the LCD monitor
1Extract the LCD monitor in the 
direction as indicated in the figure.
≥ Hold the LCD monitor extract part  A when 
pulling out.
2Rotate to the position that is easy to 
view.
To retract the LCD monitor
Retract as shown in the figure with the LCD facing 
downward.
Range of rotation of the LCD monitor≥ It can rotate...

26VQT4M90
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫Touch
Touch and release the touch screen to select icon or picture.
≥Touch the center of the icon.
≥ Touching the touch screen will not operate while you are 
touching another part of the touch screen.
∫ Slide while touching
Move your finger while pressing on the touch screen.
∫About the operation icons
///:
Touch when changing a page or performing settings. :
Touch to return to...

27VQT4M90
When the unit is turned on for the first time, a message asking you to set the date and time will 
appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1Select the menu. (l28)
2Touch the date or time to be set, then set the 
desired value using  / .
≥The year can be set between 2000 and 2039.
3Touch [ENTER].≥The screen may switch to the setting screen for the 
[TIME ZONE]. Touch the screen and set the [TIME ZONE].
≥ Touch [EXIT] to complete the setting.
≥The date and...

28VQT4M90
1Press the MENU button  .
2Touch the top menu A.
3Touch the submenu B.≥ Next (Previous) page can be displayed by touching  /
.
4Touch the desired item to enter the setting.
5Touch [EXIT] to exit the menu setting.
Preparation
Using the menu screen
MENU
MENU
AG-AC90-VQT4M90_mst.book  28 ページ  ２０１２年９月２５日　火曜日　午後１時１８分 

29VQT4M90
Formatting cards
If you use the SD cards for the first time for recording with this unit, format the cards.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, disc etc.
≥ When using two SD cards, format both SD cards.
Select the menu.
Language Selection
You can select the language on the screen display and the menu screen.
1Select the menu.
2Touch the desired setting language.
[SD CARD...

30VQT4M90
1Change the mode to  .≥Extract the LCD monitor.
2Press the recording start/stop 
button  C to start recording.
≥ Recording will stop when you press the 
recording start/stop button again.
1Change the mode to  .≥Extract the LCD monitor.
2Press the   button.≥When photos are being recorded, the 
remaining recordable number of photos and 
the photo operation display   are 
displayed.
Recording
Recording motion pictures
Recording
Recording still pictures



A
When you begin recording,  ; changes...