Panasonic Lumix DMC LS70 User Manual

							71VQT1C63
Advanced-Viewing
Using the [PLAY] mode menu
You can use various functions in playback 
mode to rotate pictures, set protection for 
them etc.
•  Refer to P72 to 83 for each menu item.
1 Press [MENU/SET].
2 Press e/r to select the menu 
item and then press q.
• Press r at A to switch to the next 
menu screen.
•  You can switch menu screens from any 
menu item by rotating the zoom lever.
•  After selecting a menu item in step 2, 
refer to the description of the menu 
item in the operating instructions and 
then set it.Items you can set
Menu PageItem
Page 1
aSLIDE SHOW (P72)
FAVORITE (P73)
jROTATE DISP. (P74)
bROTATE (P74)
DATE STAMP (P75)
Page 2
lDPOF PRINT (P77)
gPROTECT (P79)
eRESIZE (P80)
fTRIMMING (P81)
COPY (P82)
Page 3
0
FORMAT (P83)
çMENU
ç
2
/
3 1
/
3
MENU
PLAY
SELECT EXITSLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMPOFF
ON
PLAY
SELECT EXITDPOF PRINT
PROTECT
RESIZE
TRIMMING
COPY
A
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							72VQT1C63
Advanced-Viewing
[SLIDE SHOW]Playing back pictures in order 
for a fi xed duration
This is recommended when playing back 
pictures on a TV screen. You can skip 
unwanted pictures if [FAVORITE] (P73) 
has been set.
•  The screen shown in step 1 appears 
when [FAVORITE] is set to [ON]. When 
[FAVORITE] is set to [OFF], perform step 
2 onwards.
1 Press e/r to select [ALL] or [★] 
and then press [MENU/SET].
ALL For playing back all pictures
★For showing pictures in your 
favorites list (P73)
•  If none of the pictures have [
★] 
displayed, you cannot select [★] even if 
[FAVORITE] is set to [ON].
2 Press e to select [START] and 
then press [MENU/SET].
(Screen when [ALL] is selected)
•  The cursor displayed during a slide show 
A or while a slide show is paused B or 
during [MANUAL] slide show C is the 
same as e/r/w/q.
• Press e to pause the slide show. Press 
e again to cancel pause.
• Press w/q while paused to display the 
previous or next picture.
3  By pressing the r, the Slide 
Show stops.
■ About playback duration
Select [DURATION] for setting on the 
screen displayed in step 2.
DURATION Select intervals of 1, 2, 3, 
5 seconds or MANUAL.
•  You can select [MANUAL] if you have 
selected [
★] in step 1.
• Press w/q to display the previous or next 
picture when [MANUAL] is selected.
•  You cannot play back motion pictures 
and use power save in a slide show. 
(However, the setting for power save 
mode is fi xed to [10MIN.] while pausing a 
slide show or playing back a manual slide 
show.)
a
ABC
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
OFF
ç
1
/
3
MENUMENU
SET
PLAY
SELECT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMPALL
ON
SET 
MENU
SETMENU
ALL SLIDE SHOW
START
DURATION2SEC.
CANCEL
SELECT SET
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							73VQT1C63
Advanced-Viewing
[FAVORITE]Setting your favorite pictures
You can do the following if a mark has 
been added to pictures and they have 
been set as favorites.
•  Delete all the pictures not set as 
favorites. ([ALL DELETE EXCEPT 
★]) 
(P35)
•  Play back the pictures set as favorites 
only as a slide show. (P72)
•  Print only the pictures set as favorites. 
(P88)
1 Press r to select [ON] and then 
press [MENU/SET].
•  You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the 
favorites icon [
★] will not appear when 
[FAVORITE] is set to [OFF] even if it was 
previously set to [ON].
•  You cannot select [CANCEL] if none of 
the pictures have [
★] displayed.
2  Press [MENU/SET] to close the 
menu.
3 Press w/q to select the picture 
then press e.
•  Repeat the above procedure.
• If e is pressed while the [★] favorites 
icon A is displayed, [★] is cleared, and 
the favorites setting is canceled.
•  You can place up to 999 pictures in your 
favorites list.
■ Canceling all favorites
1 Select [CANCEL] on the screen shown 
in step 1 and then press [MENU/SET].
2 Press e to select [YES] and then press 
[MENU/SET].
3 Press [MENU/SET] to close the menu.
•  When printing pictures at a photo printing 
store, [ALL DELETE EXCEPT 
★] (P35) 
is useful so only the pictures you want to 
be printed remain on the card.
•  Use [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] (on the 
included CD-ROM) to change settings, 
check, or erase your pictures in your 
favorites list. (For details, refer to the 
separate operating instructions for PC 
connection.) 
•  You may not be able to put pictures you 
have shot on other equipment into your 
favorites list.
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
MENU
SET
OFF
ON
ç
1
/
3
MENU
PLAY
SELECTSLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMPOFF
ON
CANCELSET 
100-00011/19
7M
A
:..10 00 DEC 1 2007
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							74VQT1C63
Advanced-Viewing
[ROTATE DISP.]/[ROTATE]To display the picture rotated
This mode allows you to automatically 
display pictures vertically if they were 
recorded holding the camera vertically or 
rotate pictures manually in 90° steps.
■ Rotate display
(The picture is automatically rotated 
and displayed.)
1 Press r to select [ON] and then 
press [MENU/SET].
•  When you select [OFF], the pictures are 
displayed without being rotated.
•  Refer to P34 for how to play back 
pictures.
2  Press [MENU/SET] to close the 
menu.
■ Rotate 
(The picture is rotated manually.)
1 Press w/q to select the picture 
and then press r.
•  When [ROTATE DISP.] is set to [OFF], 
[ROTATE] function is disabled.
•  Motion pictures and protected pictures 
cannot be rotated.
2 Press e/r to select the direction 
to rotate the picture and then 
press [MENU/SET].
aThe picture rotates clockwise in 
steps of 90°.
bThe picture rotates counter-
clockwise in steps of 90°.
3  Press [MENU/SET] twice to close 
the menu.
•  If you take pictures when aiming the 
camera up or down, it may not be 
possible to display the pictures vertically. 
(P27)
•  The picture may be slightly blurred when 
the camera is connected to the TV with 
the video cable (supplied) and played 
back vertically.
•  When you play the picture on a PC, you 
cannot play rotated pictures without an 
OS or a software compatible with Exif. 
Exif is the fi le format for still pictures, to 
which recording information and other 
can be added, established by JEITA 
[Japan Electronics and Information 
Technology Industries Association].
•  When playing back rotated pictures in 
multi playback, pictures appear in original 
orientation.
•  You may not be able to rotate images 
shot on other equipment.
j
b
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
MENU
SETç
1
/
3
MENU
PLAY
SELECTSLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMPOFF
OFF
ONSET
MENU
100-00011/19
7M
SELECT
ROTATE
SET EXIT
MENU
SETMENUCANCEL
ROTATE
SELECT
SET
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							75VQT1C63
Advanced-Viewing
[DATE STAMP]Stamping the date on your 
pictures
You can stamp your pictures with the date 
of shooting, ages, and travel dates.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are 
resized when you add the date to the 
pictures taken with a resolution of more 
than [ ].)
1 Press e/r to select [SINGLE] or 
[MULTI] and press [MENU/SET].
•  You cannot add the date to the following 
images.
–  Images taken when the clock is not set
–  Images taken on other cameras
–  Images that already have a date on 
them
– Motion Pictures
2 Press w / q to choose a picture, 
then press r.
•  When you have selected [SINGLE] in 
step 1, proceed to step 3.
•  When you have selected [MULTI] in step 
1, repeat step 2 for each picture, press 
[MENU/SET], then proceed to step 3.
3 Press e/r/w / q to select 
[SHOOTING DATE], [AGE], or 
[TRAVEL DATE] and change the 
settings for the item, and then 
press [MENU/SET].
■ SHOOTING DATE
W/O TIME Date is added
WITH TIME Date and time are added
■ AGE (P50)
OFF Age not added
ON Age added
■ TRAVEL DATE (P55)
OFF Travel dates not added
ON Travel dates added Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENUSET
ç
1
/
3
MENUMENU
SET
PLAY
SELECTSLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMPOFF
ON
SINGLE
MULTISET 
MENU
100-00011/19
7MDATE
SELECT
STAMP
SET EXIT
MENUMENU
SET
DATE STAMP
W/O TIME
OFF
OFF
CANCELSHOOTING DATE
AGE
TRAVEL DATE
SELECT SET
3M
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							76VQT1C63
Advanced-Viewing
4 Press [MENU/SET].•  Images are resized as follows when you 
add the date to the pictures taken with a 
resolution of more than [ ].
– h aspect ratio ➞ 
–   aspect ratio ➞ 
– j aspect ratio ➞ 
5 Press e/r to select [YES] or [NO] 
and press [MENU/SET].
(Screen when you have chosen an 
image taken at [ ])
•  The message [DELETE ORIGINAL 
PICTURE?] appears when the picture is 
taken with a resolution of [ ] or less.
•  The image is replaced if you select 
[YES]. The original image is overwritten 
with the resized image that has the date 
added.
•  Select [NO] to save a new picture with 
the date.
•  You cannot save over the original picture 
if it is protected. Select [NO] to save a 
new picture with the date.
6  Press [MENU/SET] twice to close 
the menu.
•  Pictures that have been date stamped 
will be marked with the date stamp 
complete indicator A.
• To confi rm the date stamp B, use 
playback zoom (P69). 
•  Note that if you use date stamp and 
then specify printing the date when 
you order prints or on a printer, both 
dates will be printed and may overlap. 
•  Make sure there is some space available 
on the built-in memory or card.
•  It is possible to set up to 50 pictures at 
one time using [MULTI].
•  If protected pictures are included when 
you use [MULTI], a message appears 
when you select [YES] in step 5 and the 
date stamp will not be imprinted on the 
protected pictures.
•  The date may be cut off with some 
printers.
•  Once you have added the date, you will 
no longer be able to use the following 
functions with the pictures.
– [DATE STAMP]
– Date print setting in [DPOF PRINT]
– [RESIZE]
– [TRIMMING]
7M
3M3M
2.5M2M
3M
MENUMENU
SETCANCEL
DATE STAMP
IT WILL BE STAMPED ON THE
PICTURE RESIZED TO  .
DELETE ORIGINAL PICTURE?
YES
NO
3M
SELECT SET
100-00011/19
2007.12.1 10:00B
A
3 M
10:00   DEC.1.2007
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							77VQT1C63
Advanced-Viewing
[DPOF PRINT]Setting the Picture to be Printed 
and the Number of Prints
DPOF (Digital Print Order Format) is a 
system that allows the user to select which 
pictures to print, how many copies of each 
picture to print and whether or not to print 
the recording date on the pictures when 
using a DPOF compatible photo printer 
or photo printing store. For details, ask at 
your photo printing store.
When you want to use a photo printing 
store to print pictures recorded on the built-
in memory, copy them to a card (P82) and 
then set the DPOF setting.
For more information please visit:
http://panasonic.jp/dc/dpof_110/white_
e.htm
Press e/r to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
•  You cannot select [CANCEL] if there are 
no prints that have been set in the DPOF 
print settings.
■ Single setting
1 Press w/q to select the picture to 
print and then press e/r to set 
the number of prints.
•  The number of prints icon [d] appears.
•  The number of prints can be set from 0 to 
999. When the number of prints is set to 
“0”, DPOF print setting is canceled.
2  Press [MENU/SET] twice to close 
the menu.
■ Multi setting
1 Press w/q to select the picture to 
print and then press e/r to set 
the number of prints.
•  Repeat the above procedure. (You 
cannot set all the pictures at one time.)
•  The number of prints icon [d] appears.
•  The number of prints can be set from 0 to 
999. When the number of prints is set to 
“0”, DPOF print setting is canceled.
2  Press [MENU/SET] twice to close 
the menu.
l
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
MENU
SET
2
/
3
MENU
PLAY
SET DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPYSINGLE
MULTI
CANCELSELECT
1DISPLAY
1
MENU
100-00011/19
DPOF SET THIS
COUNT DATE
SELECT
EXIT 
111DISPLAYMENU
7
10
918
DPOF SET MULTI
COUNT DATE
SELECT
EXIT 
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							78VQT1C63
Advanced-Viewing
■ To cancel all settings
1 Press e to select [YES] and then 
press [MENU/SET].
2  Press [MENU/SET] to close the 
menu.
•  DPOF print settings on the built-in 
memory are canceled when a card is 
not inserted. DPOF print settings on 
the card are canceled when a card is 
inserted.
■ To print the date
You can set/cancel the printing with the 
recorded date each press of the [DISPLAY] 
button when setting the number of prints.
•  The date print icon [L] appears.
•  When you go to a photo studio for digital 
printing, be sure to order the printing of 
the date additionally if required.
•  The date may not be printed depending 
on photo studios or printers even if you 
set the date print. For further information, 
ask the photo studio for details or refer to 
the operating instructions of the printer.
•  This function is not available for images 
imprinted with the date stamp.
•  This function is canceled if you imprint 
the date stamp on the picture.•  DPOF is an abbreviation of [Digital Print 
Order Format]. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
•  DPOF print setting is a convenient 
function when you print pictures with 
printers supporting PictBridge. The date 
printing setting on the printer may take 
priority over the date printing setting 
on the camera. Check the date printing 
setting on the printer also. (P87)
•  When setting the DPOF print, delete any 
previous DPOF print settings made by 
other equipment.
• If the fi le is not based on the DCF 
standard (P34), the DPOF print setting 
cannot be set.
MENU
SETMENU
CANCEL ALL DPOF
CANCEL ALL DPOF 
PRINT SETTINGS?
SELECT
YES
NO
SET
1DISPLAY
1
MENU
100-00011/19DATE
DPOF SET THIS
COUNT DATE
SELECT
EXIT 
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							79VQT1C63
Advanced-Viewing
[PROTECT]Preventing Accidental Erasure of 
the Picture 
You can set protection for the pictures you 
do not want to delete to prevent them from 
accidental erasure.
Press e/r to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
■ Single setting
1 Press w/q to select the picture 
and then press r to set/cancel.
SET
The protect icon [c] appears.
CANCEL
The protect icon [c] 
disappears.
2  Press [MENU/SET] twice to close 
the menu.
■ Multi setting/To cancel all settings
Perform the same operation as in [[DPOF 
PRINT] Setting the Picture to be Printed 
and the Number of Prints]. (P77 and 78)
•  The protect setting may not be effective 
in other equipment.
•  If you want to delete protected pictures, 
cancel the protect setting fi rst.
•  While this feature protects the pictures 
from accidental erasure, formatting the 
card will permanently delete all data. 
(P83)
•  Sliding the Write-Protect switch A of the 
SD Memory Card or the SDHC Memory 
Card to [LOCK] prevents pictures from 
deletion even if protection is not set.
•  The following functions cannot be used 
with protected pictures.
– [ROTATE]
A
MENU
SET
2
/
3
MENU
PLAY
DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPYSINGLE
MULTI
CANCEL
SELECT
g
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
SET 
MENU
100-00011/19
PROTECT THIS
SELECTSET/CANCEL EXIT
Downloaded From camera-usermanual.com Panasonic Manuals 
						

							80VQT1C63
Advanced-Viewing
[RESIZE]Making the picture smaller
This function is useful if you want to reduce 
the fi le size of the picture in cases when 
it needs to be attached to an e-mail or 
uploaded to a website.
1 Press w/q to select the picture 
and then press r.
•  The following pictures cannot be resized.
Aspect ratio Picture size
h
j
– Motion pictures
–  Pictures imprinted with the date stamp
2 Press w/q to select the size and 
then press r.
•  Sizes smaller than the recorded picture 
are displayed.
•  The message [DELETE ORIGINAL 
PICTURE?] appears.
3 Press e/r to select [YES] or [NO] 
and then press [MENU/SET].
•  When you select [YES], the picture is 
overwritten. When resized pictures are 
overwritten, they cannot be restored.
•  When you select [NO], a resized picture 
is newly created.
•  When the original picture is protected, 
you cannot overwrite the resized picture. 
Select [NO] and newly create a resized 
picture.
4  Press [MENU/SET] twice to close 
the menu.
•  You may not be able to resize pictures 
you have shot on other equipment.
e
0.3M
2.5M
2M
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)MENUSET
MENU
100-00011/19
7MRESIZE
SELECTSET EXIT
MENU
100-00011/19
7M
7M
5M
RESIZE
SELECTRESIZE EXIT
MENU
SETMENU
RESIZE
DELETE ORIGINAL 
PICTURE?
CANCEL
YES
NO
SELECT SET
Downloaded From camera-usermanual.com Panasonic Manuals