Panasonic Lumix DMC LS70 User Manual
Here you can view all the pages of manual Panasonic Lumix DMC LS70 User Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81VQT1C63
Advanced-Viewing
[TRIMMING]Enlarging a picture and trimming it
Use this function when you trim
unnecessary parts of the recorded picture.
1 Press w/q to select the picture
and then press r.
• The following pictures cannot be
trimmed.
– Motion pictures
– Pictures imprinted with the date stamp
2 Enlarge or decrease the parts to
be trimmed with the zoom lever.
3 Press e/r/w/q to move the
position of the part to be
trimmed.
4 Press the shutter button.• The message [DELETE ORIGINAL...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-80.png "Page 81
81VQT1C63
Advanced-Viewing
[TRIMMING]Enlarging a picture and trimming it
Use this function when you trim
unnecessary parts of the recorded picture.
1 Press w/q to select the picture
and then press r.
• The following pictures cannot be
trimmed.
– Motion pictures
– Pictures imprinted with the date stamp
2 Enlarge or decrease the parts to
be trimmed with the zoom lever.
3 Press e/r/w/q to move the
position of the part to be
trimmed.
4 Press the shutter button.• The message [DELETE ORIGINAL...")
81VQT1C63 Advanced-Viewing [TRIMMING]Enlarging a picture and trimming it Use this function when you trim unnecessary parts of the recorded picture. 1 Press w/q to select the picture and then press r. • The following pictures cannot be trimmed. – Motion pictures – Pictures imprinted with the date stamp 2 Enlarge or decrease the parts to be trimmed with the zoom lever. 3 Press e/r/w/q to move the position of the part to be trimmed. 4 Press the shutter button.• The message [DELETE ORIGINAL...
Page 82
![Page 82
82VQT1C63
Advanced-Viewing
[COPY]Copying the picture data
You can copy recorded picture data from
the built-in memory to a card or vice versa.
1 Press e/r to select the copy
destination and then press
[MENU/SET].
• :
All the picture data in the built-in memory
are copied onto the card at one time.
(Perform step 3)
• :
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2 Press w/q to select the picture
and then press r.
(Only when is selected)
3 Press e to...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-81.png "Page 82
82VQT1C63
Advanced-Viewing
[COPY]Copying the picture data
You can copy recorded picture data from
the built-in memory to a card or vice versa.
1 Press e/r to select the copy
destination and then press
[MENU/SET].
• :
All the picture data in the built-in memory
are copied onto the card at one time.
(Perform step 3)
• :
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2 Press w/q to select the picture
and then press r.
(Only when is selected)
3 Press e to...")
82VQT1C63 Advanced-Viewing [COPY]Copying the picture data You can copy recorded picture data from the built-in memory to a card or vice versa. 1 Press e/r to select the copy destination and then press [MENU/SET]. • : All the picture data in the built-in memory are copied onto the card at one time. (Perform step 3) • : One picture at a time is copied from the card to the built-in memory. (Perform step 2) 2 Press w/q to select the picture and then press r. (Only when is selected) 3 Press e to...
Page 83
![Page 83
83VQT1C63
Advanced-Viewing
[FORMAT]Initializing the built-in memory
or a card
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press e to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
• If you press...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-82.png "Page 83
83VQT1C63
Advanced-Viewing
[FORMAT]Initializing the built-in memory
or a card
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press e to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
• If you press...")
83VQT1C63 Advanced-Viewing [FORMAT]Initializing the built-in memory or a card Usually, it is not necessary to format the built-in memory and the card. Format them when the message [BUILT-IN MEMORY ERROR] or [MEMORY CARD ERROR] appears. Press e to select [YES] and then press [MENU/SET]. (The illustration shows the screen when the built-in memory is formatted.) • When a card is not inserted, you can format the built-in memory. When a card is inserted, you can format the card. • If you press...
Page 84
![Page 84
84VQT1C63
Connecting to other equipment
Connecting to a PC
• By connecting the camera to a computer,
you can upload your pictures, then use the
software on the included CD-ROM ([LUMIX
Simple Viewer] and [PHOTOfunSTUDIO-
viewer-] for Windows
®) to print or send your
images by e-mail.
• If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
• For details about installing [LUMIX
Simple Viewer] or [PHOTOfunSTUDIO-
viewer-] etc., refer to the separate...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-83.png "Page 84
84VQT1C63
Connecting to other equipment
Connecting to a PC
• By connecting the camera to a computer,
you can upload your pictures, then use the
software on the included CD-ROM ([LUMIX
Simple Viewer] and [PHOTOfunSTUDIO-
viewer-] for Windows
®) to print or send your
images by e-mail.
• If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
• For details about installing [LUMIX
Simple Viewer] or [PHOTOfunSTUDIO-
viewer-] etc., refer to the separate...")
84VQT1C63 Connecting to other equipment Connecting to a PC • By connecting the camera to a computer, you can upload your pictures, then use the software on the included CD-ROM ([LUMIX Simple Viewer] and [PHOTOfunSTUDIO- viewer-] for Windows ®) to print or send your images by e-mail. • If you use Windows 98/98SE, install the USB driver and then connect the camera to the computer. • For details about installing [LUMIX Simple Viewer] or [PHOTOfunSTUDIO- viewer-] etc., refer to the separate...
Page 85
![Page 85
85VQT1C63
Connecting to other equipment
■ Folder Composition
Folders appear as follows.
1 Folder number
2 File number
3 JPG : Pictures
MOV : Motion pictures
MISC : Folder containing fi les with DPOF
settings.
• This unit stores up to 999 picture fi les in
each folder. A new folder is created after
this maximum is reached.
• To reset fi le and folder numbers, use
[NO.RESET] in the setup menu. (P22)■ Conditions under which a different
folder number is used
In the following cases, the picture is
not...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-84.png "Page 85
85VQT1C63
Connecting to other equipment
■ Folder Composition
Folders appear as follows.
1 Folder number
2 File number
3 JPG : Pictures
MOV : Motion pictures
MISC : Folder containing fi les with DPOF
settings.
• This unit stores up to 999 picture fi les in
each folder. A new folder is created after
this maximum is reached.
• To reset fi le and folder numbers, use
[NO.RESET] in the setup menu. (P22)■ Conditions under which a different
folder number is used
In the following cases, the picture is
not...")
85VQT1C63 Connecting to other equipment ■ Folder Composition Folders appear as follows. 1 Folder number 2 File number 3 JPG : Pictures MOV : Motion pictures MISC : Folder containing fi les with DPOF settings. • This unit stores up to 999 picture fi les in each folder. A new folder is created after this maximum is reached. • To reset fi le and folder numbers, use [NO.RESET] in the setup menu. (P22)■ Conditions under which a different folder number is used In the following cases, the picture is not...
Page 86
![Page 86
86VQT1C63
Connecting to other equipment
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed,
do not disconnect the USB connection
cable.
• Data transmission takes time when a
card contains a large number of pictures.
• Motion image fi les in the built-in memory
or on a card in this unit may not play
properly on a computer, so upload them
to your computer for playback.
• If the remaining battery power is
exhausted during communication, the...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-85.png "Page 86
86VQT1C63
Connecting to other equipment
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed,
do not disconnect the USB connection
cable.
• Data transmission takes time when a
card contains a large number of pictures.
• Motion image fi les in the built-in memory
or on a card in this unit may not play
properly on a computer, so upload them
to your computer for playback.
• If the remaining battery power is
exhausted during communication, the...")
86VQT1C63 Connecting to other equipment • Do not use any other USB connection cables except the supplied one. • While [ACCESS] is being displayed, do not disconnect the USB connection cable. • Data transmission takes time when a card contains a large number of pictures. • Motion image fi les in the built-in memory or on a card in this unit may not play properly on a computer, so upload them to your computer for playback. • If the remaining battery power is exhausted during communication, the...
Page 87
![Page 87
87VQT1C63
Connecting to other equipment
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to be printed or start printing
on the LCD monitor. Make the necessary
settings on your printer beforehand. (Read
your printer’s operating instructions.)
1 Turn on the camera and the printer.
2 Set the mode dial to [ ].• [PLEASE CONNECT TO THE PRINTER]
appears.
3 Connect the...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-86.png "Page 87
87VQT1C63
Connecting to other equipment
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to be printed or start printing
on the LCD monitor. Make the necessary
settings on your printer beforehand. (Read
your printer’s operating instructions.)
1 Turn on the camera and the printer.
2 Set the mode dial to [ ].• [PLEASE CONNECT TO THE PRINTER]
appears.
3 Connect the...")
87VQT1C63 Connecting to other equipment Connecting to a PictBridge-compliant Printer By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor. Make the necessary settings on your printer beforehand. (Read your printer’s operating instructions.) 1 Turn on the camera and the printer. 2 Set the mode dial to [ ].• [PLEASE CONNECT TO THE PRINTER] appears. 3 Connect the...
Page 88
![Page 88
88VQT1C63
Connecting to other equipment
■ Printing the selected picture (making
a single print)
1 Press w/q to select the picture
and then press [MENU/SET].
• A message displays for about 2 seconds.
2 Press e to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
3 Disconnect the USB connection
cable after printing.
■ Selecting multiple pictures for
printing
1 Press e.
2 Press e/r to select an item and
then press [MENU/SET].
Item Setting contents
MULTI...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-87.png "Page 88
88VQT1C63
Connecting to other equipment
■ Printing the selected picture (making
a single print)
1 Press w/q to select the picture
and then press [MENU/SET].
• A message displays for about 2 seconds.
2 Press e to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
3 Disconnect the USB connection
cable after printing.
■ Selecting multiple pictures for
printing
1 Press e.
2 Press e/r to select an item and
then press [MENU/SET].
Item Setting contents
MULTI...")
88VQT1C63 Connecting to other equipment ■ Printing the selected picture (making a single print) 1 Press w/q to select the picture and then press [MENU/SET]. • A message displays for about 2 seconds. 2 Press e to select [PRINT START] and then press [MENU/SET]. • Press [MENU/SET] to cancel printing. 3 Disconnect the USB connection cable after printing. ■ Selecting multiple pictures for printing 1 Press e. 2 Press e/r to select an item and then press [MENU/SET]. Item Setting contents MULTI...
Page 89
![Page 89
89VQT1C63
Connecting to other equipment
3 Press e to select [PRINT START]
and then press [MENU/SET].
• In DPOF setting, [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed.
• When you select [DPOF PICTURE],
[DPOF SET] is selectable. When you
select [DPOF SET], refer to P77.
• Press [MENU/SET] when you wish to
cancel printing halfway.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], the print
confi rmation screen appears. Select
[YES] and perform printing.
• When the number...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-88.png "Page 89
89VQT1C63
Connecting to other equipment
3 Press e to select [PRINT START]
and then press [MENU/SET].
• In DPOF setting, [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed.
• When you select [DPOF PICTURE],
[DPOF SET] is selectable. When you
select [DPOF SET], refer to P77.
• Press [MENU/SET] when you wish to
cancel printing halfway.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], the print
confi rmation screen appears. Select
[YES] and perform printing.
• When the number...")
89VQT1C63 Connecting to other equipment 3 Press e to select [PRINT START] and then press [MENU/SET]. • In DPOF setting, [PRINT WITH DATE] and [NUM. OF PRINTS] are not displayed. • When you select [DPOF PICTURE], [DPOF SET] is selectable. When you select [DPOF SET], refer to P77. • Press [MENU/SET] when you wish to cancel printing halfway. • When you select [MULTI SELECT], [SELECT ALL] or [FAVORITE], the print confi rmation screen appears. Select [YES] and perform printing. • When the number...
Page 90
![Page 90
90VQT1C63
Connecting to other equipment
• [PAGE LAYOUT]
(Possible layouts on the camera)
FSettings on the printer are
prioritized.
G1 page with no frame print
H1 page with frame print
I2 pages print
J4 pages print
• An item cannot be selected if the
printer does not support the page
layout.
■ Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [
J] and then set the
number of...](http://img.usermanuals.tech/thumb/58/38340/w300_Panasonic_Lumix_DMC-LS70-89.png "Page 90
90VQT1C63
Connecting to other equipment
• [PAGE LAYOUT]
(Possible layouts on the camera)
FSettings on the printer are
prioritized.
G1 page with no frame print
H1 page with frame print
I2 pages print
J4 pages print
• An item cannot be selected if the
printer does not support the page
layout.
■ Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [
J] and then set the
number of...")
90VQT1C63 Connecting to other equipment • [PAGE LAYOUT] (Possible layouts on the camera) FSettings on the printer are prioritized. G1 page with no frame print H1 page with frame print I2 pages print J4 pages print • An item cannot be selected if the printer does not support the page layout. ■ Layout printing • When printing a picture several times on 1 sheet of paper For example, if you want to print a picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [ J] and then set the number of...