Panasonic LUMIX DMC LC50 User Manual

							 Playback (advanced)
71
Playing Back with Slide Show
Preparation
 Set the mode dial to [ ]. (P8)
1Select [SLIDE SHOW].
2Select the type of pictures to play 
back.
 [ALL]:
for playing back all pictures
[DPOF]:
for playing back the pictures 
DPOF Slide Show is set
3Select the following items.
 [DURATION]:
It can be set among 1, 2, 3 and 
5 seconds.
 [AUDIO] (DMC-LC80/DMC-LC70):
By setting it to [ON], the audio of 
the pictures with audio can be 
played back during Slide Show.
 [DPOF SET] (Only when setting to 
[DPOF]):
You can select the pictures you 
want to set to the Slide Show.
 [CANCEL ALL] (Only when setting 
to [DPOF]):
You can cancel the DPOF Slide 
Show setting.
PLAY1/2SETUP
PR RO
DPOF PRINT
SLIDE SHO
A
EXITSET SELECTMENU
WBWB
PLAY1/2SETUP
PR RO
DPOF PRINT
SLIDE SHO
A
ALLDPOF
EXITSET SELECTMENU
WBWB
SELECT SET EXITMENU
START
DURATION
AUDIO
1SEC.2SEC. 3SEC. 5SEC.
OFF
WB
LC80GN.book  71 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
72
4Select [START].
5By pressing the [MENU] button, 
the Slide Show stops.
ªSD Slide Show
If setting the SD Slide Show with the 
[SD Viewer for DSC] which is in the 
supplied CD-ROM, when playing back, 
the confirmation screen appears. Select 
[YES] and press 4 to start the SD 
Slide Show. Select [NO] and press 4 to 
start normal playback.¬
Suggestions/Tips ¬
 When setting the DPOF Slide Show, 
DPOF icon 1 appears on the picture 
in green.
 When setting the DPOF Slide Show to 
the picture with DPOF printing, both 
the DPOF icon 1 and the number of 
prints appear on the picture in green.
 When only the DPOF printing is set on 
the picture, the DPOF icon 1 and the 
number of prints appear in white.
 In motion image playback, Slide Show 
is not available.
 The DPOF setting of Slide Show will 
not be applied to the DPOF printing.
 DPOF Slide Show cannot be 
performed without the DPOF setting of 
Slide Show.
 DPOF setting with the [SD Viewer for 
DSC] in the supplied CD-ROM is only 
for printing. Please set DPOF Slide 
Show with this camera to play back 
pictures in DPOF Slide Show.
 When setting the DPOF Slide Show 
on this camera, you need to cancel 
previous DPOF print settings by other 
equipment.
 Audio cannot be played back from this 
camera. Connect to a television to play 
back audio. (DMC-LC80/DMC-LC70) 
(P79)
SELECT SET EXITMENU
START
DURATION
AUD IO
1SEC.
OFF
WBWB
DPOF SET THIS100_
00011/19
EXITSET/CANCELSELECTMENU
LC80GN.book  72 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
73
Adding Audio to Recorded Pictures
(Audio Dubbing) (DMC-LC80/DMC-LC70)
Preparation
 Set the mode dial to [ ]. (P8)
1Select [AUDIO DUB.].
2Select the picture and start audio 
recording.
 When audio has already been 
recorded, the confirmation screen 
appears. Press 2 to select [YES], 
and press 4 to start audio 
recording. (The original audio is 
overwritten.) The audio dubbing cannot be used 
with motion images or protected 
pictures.
3Stop audio recording.
 Even if you do not press 4, after 
about 10 seconds the audio 
recording stops automatically.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the setting.
PLAY1/2SETUP
PROTECT ROTATE
DPOF PRINT
SLIDE SHOW
AUDIO DUB.
EXITSET SELECTMENU
WBWB
START SELECT
EXITMENU
AUDIODUB.1600
100-0001
1/19  
WBWB
STOP
AUDIODUB.1600
100-0001
1/19
WB
LC80GN.book  73 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
74
Resizing the Pictures
This function is useful if you want to reduce the file size of the picture in those cases 
when it needs to be attached to an e-mail or uploaded to a website.
Preparation
 Set the mode dial to [ ]. (P8)
1Select [RESIZE].
2Select the picture and set it.
3Select the size and set it.
 [2048]: 2048k1536 pixels
(DMC-LC80)
 [1600]: 1600k1200 pixels
 [1280]: 1280k960 pixels
 [640]: 640k480 pixels
PLAY2/2SETUn
TRIMMING RESIZE
FORMAT
EXITSET SELECTMENU
WBWB
SET SELECT
EXITMENU
RESIZE1600
100-0001
1/19 
WBWB
1600
1280
RESIZE SELECT
EXITMENU
RESIZE1600
100-0001
1/19
WBWB
LC80GN.book  74 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
75
4Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
resized picture.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the resizing.
¬Suggestions/Tips ¬
 The following pictures cannot be 
resized.
– Pictures not over 640k480 pixels
– Pictures recorded after setting the 
picture size to [HDTV]
– Motion images
– Flip animation (DMC-LC80/
DMC-LC70)
–
Pictures with audio (DMC-LC80/
DMC-LC70)
– Rotated pictures (You can resize 
them if you turn them back.)
 It may not be possible to resize 
pictures recorded with other 
equipment.
DELETE ORIGINAj
PICTURE?
YEqNO
RESIZE
CANCELSET SELECTMENU
WBWB
LC80GN.book  75 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
76
Trimming the Pictures
Preparation
 Set the mode dial to [ ]. (P8)
1Select [TRIMMING].
2Select the picture to trim.
3Enlarge or decrease the picture.
PLAY2/2SETUP
TRIMMING RESIZE
FORMA
EXITSET SELECTMENU
WBWB
SET SELECT
EXITMENU
TRIMMING1600
100-0001
1/19
WBWB
TRIMMING
ZOOM
1600
1/19
EXITMENU
100_
0001
WT
LC80GN.book  76 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
77
4Shift the picture and press the 
shutter button fully to set.
5Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
trimmed picture.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the trimming.
¬Suggestions/Tips ¬
 The following pictures cannot be 
trimmed.
– Pictures smaller than 640k480 
pixels
– Pictures recorded after setting the 
picture size to [HDTV]
– Motion images
– Flip animation (DMC-LC80/
DMC-LC70)
–
Pictures with audio (DMC-LC80/
DMC-LC70)
– Rotated pictures (You can trim them 
if you rotate them back.)
 It may not be possible to trim pictures 
recorded with other equipment.
 The picture size of the trimmed 
pictures may become smaller than that 
of the original one depending on the 
cut size.
 The picture quality of the trimmed 
picture may be deteriorated.
TRIMMING
TRIM:SHUTTER
1600
1/19
EXITMENU
100¢
0001
ZOOM
WB
DELETE ORIGINAj
PICTURE?
YEqNO
TRIMMING
SET SELECTCANCELMENU
WBWB
LC80GN.book  77 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
78
Formatting the Card
Preparation
 Set the mode dial to [ ]. (P8)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format 
the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is formatted all images 
and data will be permanently 
erased. They cannot be reclaimed. 
If any important pictures are on the 
card, please copy them to your PC 
before proceeding.
 During formatting, do not turn the 
camera off.
 Use sufficiently charged batteries 
(P13) or AC adaptor (optional, 
DMW-AC2).
 When the SD Memory Card 
Write-Protect switch is slid to [LOCK], 
you cannot format the card.
 If the card cannot be formatted, 
consult your nearest servicentre.
PLAY2/2SETUn
TRIMMING RESIZE
FORMAT
EXITSET SELECTMENU
WBWB
DELETE ALL DATA
ON THE MEMORY CARD?
YEqNO
FORMAT
SET SELECT
WBWB
LC80GN.book  78 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
79
Playing Back Pictures with a TV Screen
ªPlaying back pictures with AV cable (supplied with DMC-LC80/DMC-LC70) 
or video cable (supplied with DMC-LC50).
 Turn the camera and the TV off.
 DMC-LC80/DMC-LC70 is illustrated 
below as an example.
1 AV cable (DMC-LC80/DMC-LC70)
Video cable (DMC-LC50)
1Connect the AV cable (supplied 
with DMC-LC80/DMC-LC70) to the 
[AV OUT] socket of the camera 
(DMC-LC80/DMC-LC70). Connect 
the video cable (supplied with 
DMC-LC50) to the [V.OUT] socket 
of the camera (DMC-LC50).
 Align the 2 mark on the AV cable 
(video cable) and the 1 mark on the 
[AV OUT (V.OUT)] socket.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV (DMC-LC80/DMC-LC70). 
Connect the video cable to video 
input socket of the TV 
(DMC-LC50).
A  Yellow: to the video input socket
B  White: to the audio input socket 
(DMC-LC80/DMC-LC70)
3Turn the TV on and select external 
input.
4Turn the camera on and then set 
the mode dial to playback mode 
[].
ªViewing pictures in other 
countries
When setting [VIDEO OUT] on the 
menu, you can view pictures on a TV in 
other countries (regions) which use the 
NTSC or PAL system.
ªPlayback pictures on TV with an 
SD Memory Card slot
An SD Memory Card can be played back 
on TVs with an SD Memory Card slot.
If you play back pictures recorded using 
[HDTV] mode on a High-Definition TV, 
(HDTV has 16:9 aspect) the picture 
quality will be higher.
¬
Suggestions/Tips ¬
 Do not use any other AV (video) 
cables except the supplied one.
 Only when the mode dial is set to 
Playback mode [ ], the image is 
displayed on the TV.
 Read the TV operating instructions 
too.
1
A
B
LC80GN.book  79 ページ  ２００４年６月１７日　木曜日　午前１０時１８分  
						

							 Playback (advanced)
80
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P22)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
REC2/
3
USB MODE
NO
RESET
CLOCK SET
EXITSET SELECTMENU
WB
WBWB
USB
SET SELECT
Mass StoragePTP
USB MODE
USB
Direct-PrPictBr
WBWB
USB modePC to be connectedPrinter to be 
connected
Mass Storage
(USB Direct-Print)Windows
® XP Home Edition, 
Windows XP Professional, Windows 
2000 Professional, Windows Me, 
Windows 98/98 SE or Mac OS X 
(10.1 or above), Mac OS 9.xPrinters supporting 
USB 
DIRECT-PRINT.
PTP
(PictBridge)Windows XP Home Edition, Windows 
XP Professional or Mac OS XPrinters supporting 
PictBridge.
LC80GN.book  80 ページ  ２００４年６月１７日　木曜日　午前１０時１８分