Panasonic Lumix DMC FZ1 User Manual

							Technical use
71 Technical use
Playing Back with Slide Show 
(Automatic Playback)
All pictures selected in the card can be played 
back one-by-one automatically.
[Preparation]
 Set the mode dial to playback [ ]. (P25)
1Press the [MENU] button.
2Press 3/4 to select [SLIDE SHOW] 
and then press 1.
3Press 3/4 to select [ALL]/[DPOF] 
and then press 1
.
 [ALL]: 
for playing back all pictures
[DPOF]: 
for playing back the DPOF set pictures 
4Press 3/4/2/1 for setting below.
 [DURATION]: 
It can be set among 1, 2, 3 and 5 
seconds.
 [AUDIO]: 
It can be set to [ON] or [OFF]. By setting 
it to [ON], it is possible to play back the 
still pictures with audio in slide show.
 [DPOF SET] (Only when setting to 
[DPOF]):
You can select the pictures you want to 
set to the Slide Show.
 [CANCEL ALL] (Only when setting to 
[DPOF]): 
You can cancel the Slide Show setting.
5Press 3/4 to select [SLIDE SHOW].
6Press 1.
 The slide show starts.
 By pressing the [MENU] button, the 
slide show stops.
1
2,3,4,5,6
PROTECT
DPOF
SLIDE SHOWAUDIO DUB.ALL
DPOF
SETUPPLAY1/2
RESIZE
SELECT SETEXITMENU
2,3
DPOF PRINT
OFF
1 SEC.
SLIDE SHOW
DURATION
AUDIO
SELECT SETEXITMENU
4
START SLIDE SHOW
ALL SLIDE SHOW
STOP
6




						

							Technical use
72
 In motion image playback, slide show is not available.
 The DPOF setting of slide show will not be applied to the DPOF printing.
 When setting [AUDIO] to [ON], the still picture with audio is played back for 
5 seconds (audio recording)/Max 10 seconds (audio dubbing).
 When editing with the supplied software [SD Viewer for DSC] recorded on the 
CD-ROM, you can play back in SD slide show with this camera. (P94)
 Images that are set with DPOF with the supplied software [SD Viewer for DSC] 
recorded on the CD-ROM cannot be played back in DPOF slide show with this 
camera. Set DPOF slide show on this camera.
 When using the DPOF feature, this camera will overwrite any previous DPOF 
settings made by other products.




						

							Technical use
73
Adding Audio to Recorded Pictures 
(Audio Dubbing)
It is possible to add a 10-second narration to 
a recorded picture.
[Preparation]
 Set the mode dial to playback [ ]. (P25)
1Press the [MENU] button.
2Press 3/4 to select [AUDIO DUB.] 
and then press 1
.
3Press 2/1 to select the picture.
4Press the 4/[REVIEW/SET] button to 
start audio recording
. 
(1Microphone)
 When audio has already been recorded, 
after the audio dubbing the original 
audio is overwritten.
 When audio has already been recorded, 
this message is displayed 
“OVERWRITE AUDIO DATA?”. Press 
2/1 to select [YES], and press the 4
/[REVIEW/SET] button to start audio 
recording.
5Press the 4/[REVIEW/SET] button to 
stop audio recording
.
 Even if you do not press the 4/[REVIEW/SET] button, after about 
10 seconds the audio recording stops 
automatically.
6Press the [MENU] button.
 The menu will disappear.
 Adding audio will use additional memory. 
Using this feature will result in fewer images 
being able to be saved.
 The audio dubbing feature cannot be used 
with motion images.
 The audio dubbing feature cannot be used 
with protected images.
1,6
2,3,4,5
PROTECT
SLIDE SHOWAUDIO DUB.
SETUPPLAY1/2
RESIZE
AUDIODUB.
SELECTSTARTMENUEXIT
SELECT SET EXITMENU
3,42
DPOF PRINT




						

							Technical use
74
Resizing Recorded Pictures
It is possible to reduce the recorded picture 
size. This function is useful if you want to 
reduce the volume of the picture for the 
purpose of attaching it to an e-mail or 
uploading it to a web-site.
[Preparation]
 Set the mode dial to playback [ ]. (P25)
1Press the [MENU] button.
2Press 3/4 to select [RESIZE] and 
then press 1.
3Press 2/1 to select the picture, and 
then press 4.
4Press 2/1 to select the size.
 : 1280 a 960
 :   640 a 480
5Press the 4/[REVIEW/SET] button to 
set the size
.
6When this message is displayed 
“DELETE ORIGINAL PICTURE?”, 
press 2/1 to 
select [YES] or [NO].
7Press the 4/[REVIEW/SET] button.
8Press the [MENU] button.
 The menu will disappear.
 Resizing images will use additional memory 
if the original image is saved.
 It is not possible to resize pictures in a size 
lower than/equal to [640 a 480] or with an 
aspect ratio that is not 4:3.
 It may not be possible to resize the pictures 
recorded with other equipment.
 It is not possible to resize a motion image/
still picture with audio.
1,8
2,3,4,5,6,7
PROTECT
SLIDE SHOWAUDIO DUB.
SETUPPLAY1/2
RESIZE
SELECT SET EXITMENU
2
DPOF PRINT
RESIZE
SELECTSETMENUEXIT
1600
63
4
SELECTSET
RESIZE EXITMENU
DELETE ORIGINAL
PICTURE?
YESNO
1600RESIZE
1280 1600
RESIZE




						

							Technical use
75
Trimming Recorded Pictures
It is possible to cut off the unnecessary parts 
of the picture (trimming), and enlarge the 
remaining parts of the picture.
[Preparation]
 Set the mode dial to playback [ ]. (P25)
1Press the [MENU] button.
2Press 3/4 to select [TRIMMING] and 
then press 1.
3Press 2/1 to select the picture, and 
then press 4
.
4Rotate the zoom lever towards [ ] 
to make subject appear closer, and 
towards [ ] to make subject appear 
further away.
5Press 3/4/2/1 to shift pictures.
6Press the shutter button to set.
7When this message is displayed 
“DELETE ORIGINAL PICTURE?”, 
press 2/1 to select [YES] or [NO].
8Press the 4/[REVIEW/SET] button.
9Press the [MENU] button.
 The menu will disappear.
 Trimming images will use additional 
memory if the original image is saved.
 It is not possible to resize pictures in a size 
lower than [640 a 480] or with an aspect 
ratio that is not 4:3.
 You cannot operate trimming on pictures 
recorded with other equipment.
 Trimming is not possible for a motion image/
still picture with audio.
1,96
2,3,5,7,8
WT4
SETUPPLAY2/2
FORMATTRIMMING
SELECT SET EXITMENU
2
TRIMMING
TRIMMING
TRIMMING
MENUEXIT
DELETE ORIGINAL
PICTURE?
YESNO
4,5,6
7
SELECTSETMENUEXIT
ZOOM
TRIM:SHUTTER
SELECTSET
3




						

							Technical use
76
Formatting the Card
Usually, it is not necessary to format the card 
(initializing). Format the card when this 
message is displayed “MEMORY CARD 
ERROR”.
 If the card has been formatted by a PC or 
other equipment, format the card on the 
camera again.
[Preparation]
 Set the mode dial to playback [ ]. (P25)
1Press the [MENU] button.
2Press 3/4 to select [FORMAT] and 
then press 1.
3When this message is displayed 
“DELETE ALL DATA ON THE 
MEMORY CARD?”, press 2/1 to 
select [YES].
4Press the 4/[REVIEW/SET] button.
 The card is formatted.
 After formatting, recorded images and 
any other data cannot be recovered.
 During formatting, do not turn the power off.
 If the card cannot be formatted, consult your dealer.
12,3,4
SETUPPLAY2/2
TRIMMING
SELECT SETEXITMENU
2
FORMAT
DELETE ALL DATA 
ON THE MEMORY CARD?
FORMAT
YESNO
SELECTSET
3
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]         
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca 
 




						

							Technical use
77
Adjusting the LCD Monitor/Viewfinder 
Brightness
You can adjust the brightness of the LCD 
monitor or Viewfinder.
[Preparation]
 Set the mode dial except for [ ]. (P25)
 Press the [DISPLAY] button to select the 
display of LCD monitor 1 or Viewfinder 2. 
(P23)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [MONITOR]/ 
[FINDER]
.
4Press 2/1 to adjust the brightness.
5Press the [MENU] button.
 The menu will disappear.
 Adjusting the LCD Monitor/Viewfinder will 
not lighten or darken the actual photograph.
 Adjusting the LCD Monitor/Viewfinder to 
brighten the image may incorrectly display 
the scene making it appear brighter than the 
actual photo will be. In most cases the 
default setting will produce the best 
performance and closest reproduction of the 
actual scene.
1,52,3,4
BEEP
SETUP   1/2
MONITOR
SELECT SETEXITMENU
AUTO REVIEW
POWER SAVE
REC
3,4
BEEP
SETUP   1/2
FINDER
SELECT SETEXITMENU
AUTO REVIEW
POWER SAVE
REC




						

							Technical use
78
Using the Auto Review
Recording with the auto review set to 
[1 SEC.]/[3 SEC.], the recorded picture is 
automatically displayed on the LCD monitor/
Viewfinder for 1 or 3 seconds.
[Preparation]
 Set the mode dial except for [ ]/[ ]. 
(P25)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [AUTO REVIEW].
4Press 2/1 to select [1SEC.] or 
[3 SEC.].
5Press the [MENU] button.
 The menu will disappear.
 Even when setting the auto review to [1 SEC.]/[3 SEC.], it is not available in 
motion image mode [ ].
 When recording in burst mode, auto bracket, still picture with audio modes, the 
recorded picture is automatically displayed.
 In simple mode [ ], the auto review setting becomes [ON] (1 second) or [OFF].
1,52,3,4
BEEP
SETUP   1/2
SELECT SETEXITMENU
REC
MONITOR
AUTO REVIEWOFF1 SEC. 3 SEC.
POWER SAVE
3,4




						

							Technical use
79
Setting up the Operational Sound
It is possible to set the sound volume when 
the menu operations are done.
1Press the [MENU] button.
2Press 1 to open the setup menu.
 In simple mode, skip this step.
3Press 3/4 to select [BEEP].
4Press 2/1 to adjust the operational 
sound volume.
5Press the [MENU] button.
 The menu will disappear.
 In simple mode [ ], the setting becomes 
[ON] or [OFF].
1,52,3,4
SETUP   1/2
SELECT SETEXITMENU
REC
MONITORAUTO REVIEW
POWER SAVE
BEEP
3,4




						

							Technical use
80
Setting up the Power Save Mode
The Power Save Mode can automatically turn 
the camera off if it has not been used for a 
predetermined amount of time.
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [POWER SAVE].
4Press 2/1 to choose the setting 
time.
 [2 MIN.]
 [5 MIN.]
[10MIN.]
 [OFF]: The power is not turned off 
automatically.
5Press the [MENU] button.
 The menu will disappear.
 If you want to cancel the power save mode, turn the power switch to [ON] again 
after turning it to [OFF], or press the shutter button.
 When using the AC adaptor/connecting to a PC/recording a motion image/playing 
back a motion image/during slide show, the power save mode is not available.
 In simple mode [ ], the power save is fixed to [2 MIN.].
1,52,3,4
SETUP   1/2
BEEP
SELECT SETEXITMENU
REC
MONITOR
POWER SAVE2 MIN.5 MIN.10 MIN.
AUTO REVIEW
3,4