Panasonic Lumix DMC FX50 User Manual
Have a look at the manual Panasonic Lumix DMC FX50 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu Settings 81VQT0Y19 wTo cancel the dual display Press [MENU/SET]. • The picture displayed in the orange frame appears on the 1 screen playback screen. • When [ROTATE DISP.] is set to [ON], pictures recorded holding the camera vertically are played back vertically (rotated). • You cannot display the same picture on the dual display at the same time. • Press [ ] to return to the 1 screen playback screen. • You cannot select [DUAL DISPLAY] if there are no recorded pictures or only 1 recorded picture. Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) This is recommended when playing back pictures on a TV screen. You can skip unwanted pictures if [FAVORITE] (P82) has been set. 1Move to select [ALL] or [ ] and then press [MENU/SET]. • The screen shown in step 1 appears when [FAVORITE] is set to [ON]. When [FAVORITE] is set to [OFF], perform step 2 onwards.• If none of the pictures have [ ] displayed, you cannot select [ ] even if [FAVORITE] is set to [ON]. 2Move to select [START] and then press [MENU/SET]. (Screen when [ALL] is selected) • The cursor displayed during a slide show or while a slide show is paused or during [MANUAL] slide show is the same as ///. •Move to pause the slide show. Move again to cancel pause. •Move / while paused to display the previous or next picture. (However, the selected effect is disabled) 3Move to finish. [SLIDE SHOW] Playing back pictures in order for a fixed duration [ALL]Displays all pictures. []Displays only those pictures that have been set as favorites (P82). /SETMENU PLAY ON OFF SETMENUSELECT FAVORITEROTATE DISP.ROTATE SLIDE SHOWALLDUAL DISPLAY /SETMENU 1/3 ALL SLIDE SHOW SETSELECTMENUCANCEL START EFFECT AUDIO2 SEC.OFF OFFDURATION /SETMENU Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 82VQT0Y19 wSetting the audio, duration and effect Select [DURATION], [EFFECT] or [AUDIO] on the screen shown in step2 and set. • You can only select [MANUAL] when [ ] has been selected in step1. •Move / to display the previous or next picture when [MANUAL] is selected. • If you set [AUDIO] to [ON] and then play back a picture with audio, the next picture will be displayed after the audio has finished. • You cannot play back motion pictures and use power save in a slide show. (However, the setting for power save mode is fixed to [10MIN.] while pausing a slide show or playing back a manual slide show.) Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) You can do the following if a mark has been added to pictures and they have been set as favorites. • Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT ]) (P33) • Play back the pictures set as favorites only as a slide show. (P81) 1Move to select [ON] and then press [MENU/SET]. • You cannot set pictures as favorites if [FAVORITE] is set to [OFF]. Also the favorites icon [ ] will not appear when [FAVORITE] is set to [OFF] even if it was previously set to [ON]. • You cannot select [CANCEL] if none of the pictures have [ ] displayed. [DURATION]Can be set to [1SEC.], [2SEC.], [3SEC.], [5SEC.] or [MANUAL] (manual playback). [EFFECT]A slide show effect can be selected. [OFF]:No effect : New pictures slide across the screen. :New pictures appear from behind the current pictures and replace them. : New pictures gradually fill the screen from the center. : An effect is selected at random. • If you set [DURATION] to [MANUAL] the settings in [EFFECT] are disabled. [AUDIO]If set to [ON], the audio of the pictures with audio is played back. [FAVORITE] Setting your favorite pictures /SETMENU PLAY ON OFF SETMENU ROTATE DISP.ROTATE SLIDE SHOW ON OFFCANCEL FAVORITE SELECT/SETMENU DUAL DISPLAY 1/3 Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 83VQT0Y19 2Press [MENU/SET] to close the menu. 3Move to select the picture then move . • Repeat the above procedure. •If is moved while the [ ] favorites icon is displayed, [ ] is cleared, and the favorites setting is canceled. • You can set up to 999 pictures as favor ite s. wDeleting all favorites 1Select [CANCEL] on the screen shown in step 1 and then press [MENU/SET]. 2Move to select [YES] and then press [MENU/SET]. 3Press [MENU/SET] to close the menu. • When printing pictures at a photo printing store, [ALL DELETE EXCEPT ] (P33) is useful so only the pictures you want to be printed remain on the card. • Use [LUMIX Simple Viewer] on the CD-ROM (supplied), to set, confirm or delete favorites. (For information about this, refer to the separate operating instructions for PC connection.) • You may not be able to set pictures taken with other equipment as favorites.Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° steps. wRotate display (The picture is automatically rotated and displayed.) 1Move to select [ON] and then press [MENU/SET]. • The pictures are displayed without being rotated when you select [OFF]. • Refer to P32 for information about how to play back pictures. 2Press [MENU/SET] to close the menu. 1/3 10:00 DEC. 1.2006 [ROTATE DISP.]/[ROTATE] To display the picture rotated /SETMENU PLAY ON OFF SETMENU OFF ONFAVORITEROTATE DISP.ROTATE SLIDE SHOWDUAL DISPLAY SELECT/SETMENU 1/3 Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 84VQT0Y19 wRotate (The picture is rotated manually.) 1Move to select the picture and then move . • The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF]. • Motion pictures and protected pictures cannot be rotated. 2Move to select the direction to rotate the picture and then press [MENU/SET]. 3Press [MENU/SET] twice to close the menu. wExample When rotating clockwise ( ) Original picture • When [ROTATE DISP.] is set to [ON], pictures recorded holding the camera vertically are played back vertically (rotated). • If you take pictures when aiming the camera up or down, it may not be possible to display the pictures vertically. (P24) • The picture may be slightly blurred when the camera is connected to the TV with the AV cable (supplied) and played back ver tically. • When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”. • Rotated pictures are displayed rotated when they are played back in review playback and playback zoom however are displayed without being rotated when they are played back in multi playback. • It may not be possible to rotate pictures that have been recorded with other equipment. The picture rotates clockwise in steps of 90°. The picture rotates counter-clockwise in steps of 90°. ROTATE SELECT SET 1/3 EXITMENU ROTATE SELECTSETMENUCANCEL/SETMENU Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 85VQT0Y19 Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. For more information visit: http://panasonic.jp/dc/dpof_110/white_e.htm Move to select [SINGLE], [MULTI] or [CANCEL] and then press [MENU/SET]. • You cannot select [CANCEL] if there are no prints that have been set in the DPOF print settings.wSingle setting 1Move to select the picture to print and then move to set the number of prints. • The number of prints icon [ ] appears. • The number of prints can be set from 0 to 999. The DPOF print setting is canceled when the number of prints is set to [0]. 2Press [MENU/SET] twice to close the menu. wMulti setting 1Move to select the picture to print and then move to set the number of prints. • The number of prints icon [ ] appears. • Repeat the above procedure. (You cannot set all the pictures at one time.) • The number of prints can be set from 0 to 999. The DPOF print setting is canceled when the number of prints is set to [0]. 2Press [MENU/SET] twice to close the menu. [DPOF PRINT] Setting the picture to print and the number of prints /SETMENU /SETMENU PLAY SET MENUSELECT RESIZETRIMMING AUDIO DUB.PROTECTSINGLE MULTI CANCELDPOF PRINT2/3 DATEDISPLAY 1DPOF SET THIS COUNT1SELECT 1/3 EXITMENU DATEDISPLAYCOUNT1 DPOF SET MULTI SELECTEXITMENU 798 111210 1 Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 86VQT0Y19 wTo cancel all settings 1Move to select [YES] and then press [MENU/SET]. 2Press [MENU/SET] to close the menu. wTo print the date After setting the number of prints, set/ cancel printing with the recording date by pressing [DISPLAY]. • The date print icon [ ] appears. • When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required. • Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer. • DPOF is an abbreviation of “Digital Print Order Format”. This feature allows you to write print information to media and then use the information on a DPOF-compliant system. • DPOF print setting is a convenient function when printing pictures with a printer that supports PictBridge. The date printing setting on the printer may take priority over the date printing setting on the camera. Check the date printing setting on the printer also. (P95) • It is necessary to delete all previous DPOF print information made on other equipment when setting DPOF print on the camera. • If the file is not based on the DCF standard, the DPOF print setting cannot be set. DCF is an abbreviation of “Design rule for Camera File system”, stipulated by “JEITA (Japan Electronics and Information Technology Industries Association)”. CANCEL ALL DPOF CANCEL ALL DPOF PRINT SETTINGS? SELECTSET NOYES MENU/SETMENU DATEDISPLAY DPOF SET THIS1 COUNT1 1/14 SELECTEXITMENU DATE DATE Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 87VQT0Y19 Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) You can set protection for pictures you do not want to be deleted by mistake. Move to select [SINGLE], [MULTI] or [CANCEL] and then press [MENU/SET]. wSingle setting 1Move to select the picture and then move to SET/CANCEL. 2Press [MENU/SET] twice to close the menu. wMulti setting/To cancel all settings Perform the same operation as in “[DPOF PRINT] Setting the picture to print and the number of prints”. (P85 to 86) • If you press [MENU/SET] while canceling protection, the canceling will stop halfway. • The protect setting may not be effective on other equipment. • If you want to delete protected pictures, cancel their protection. • Even if you protect pictures on a card, they will be deleted if the card is formatted. (P91) • Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK]. • The following functions cannot be used with protected pictures. –[ROTATE] –[AUDIO DUB.] [PROTECT] Preventing accidental erasure of pictures [SET]The protect icon [ ] appears. [CANCEL]The protect icon [ ] disappears. /SETMENU PLAY ON OFFRESIZETRIMMING AUDIO DUB.SINGLE MULTI CANCELPROTECT SETMENUSELECT/SETMENU DPOF PRINT 2/3 SET/CANCEL PROTECT THIS SELECT 1/14100 0001 EXITMENU 16 Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 88VQT0Y19 Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) You can add the audio after taking a picture. 1Move to select the picture and then move to start audio recording. • The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Move to select [YES] and then press [MENU/ SET] to start audio recording. (The original audio is overwritten.) • Audio dubbing cannot be used with the following pictures. – Motion pictures – Protected pictures • Audio dubbing may not work properly on pictures recorded by other equipment. 2Move to stop recording. • The audio recording stops automatically if is not moved after about 10 seconds. 3Press [MENU/SET] twice to close the menu. Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) This function is useful if you want to reduce the file size of a picture to attach it to an e-mail or upload it to a website. 1Move to select the picture and then move . • The following pictures cannot be resized. – Pictures recorded in [ ] (0.3M EZ) (When the aspect ratio setting is [].) – Pictures recorded in [ ] (2.5M EZ) (When the aspect ratio setting is [].) – Pictures recorded in [ ] (2M EZ) (When the aspect ratio setting is [].) – Motion pictures – Pictures with audio • It may not be possible to resize pictures recorded with other equipment. [AUDIO DUB.] Adding audio after taking pictures /SETMENU AUDIODUB. STARTSELECT 1/3100_ 0001 EXITMENU AUDIODUB. STOP 1/3100_ 0001 [RESIZE] Making the picture smaller /SETMENU RESIZE EXITSET SELECT 1/3 MENU Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 89VQT0Y19 2Move to select the size and then move . • Sizes smaller than the recorded picture are displayed. – [ ]/[ ]/[ ]/[ ]/[ ] (When the aspect ratio setting is [].) –[ ] (When the aspect ratio setting is [].) –[ ] (When the aspect ratio setting is [].) • The message [DELETE ORIGINAL PICTURE?] appears. 3Move to select [YES] or [NO] and then press [MENU/SET]. • The picture is overwritten when you select [YES]. Resized pictures cannot be restored when they are overwritten. • A resized picture is newly created when you select [NO]. • If the original picture is protected, you cannot overwrite it. Select [NO] and newly create a resized picture. 4Press [MENU/SET] twice to close the menu. Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) You can enlarge and then clip the important part of the recorded picture. 1Move to select the picture and then move . • The following pictures cannot be trimmed. – Motion pictures – Pictures with audio • It may not be possible to trim pictures recorded with other equipment. 2Enlarge or decrease the parts to be trimmed with the zoom lever. 3Move /// to move the position of the part to be trimmed. RESIZE EXITRESIZE SELECT 1/3 MENU RESIZE DELETE ORIGINAL PICTURE? NOYES SETMENUSELECTCANCEL/SETMENU [TRIMMING] Enlarging a picture and trimming it /SETMENU TRIMMING EXITSELECTSET 1/3 MENU ZOOMEXIT TRIMMING 1/3 MENU TW TRIM:SHUTTER ZOOMEXIT TRIMMING 1/3 MENU Downloaded From camera-usermanual.com Panasonic Manuals
Menu Settings 90VQT0Y19 4Press the shutter button. • The message [DELETE ORIGINAL PICTURE?] appears. 5Move to select [YES] or [NO] and then press [MENU/SET]. • The picture is overwritten when you select [YES]. The trimmed pictures cannot be restored when they are overwritten. • A trimmed picture is newly created when you select [NO]. • When the original picture is protected, you cannot overwrite it. Select [NO] and newly create a trimmed picture. 6Press [MENU/SET] twice to close the menu. • Depending on the cut size, the picture size of the trimmed picture may become smaller than that of the original picture. • The picture quality of the trimmed picture will deteriorate.Press [ ] to display the [PLAY] mode menu and select the item to set. (P80) You can convert pictures taken with a [ ] aspect ratio to a [ ] or a [ ] aspect ratio. 1Move / to select [ ] or [ ] and then press [MENU/ SET]. • Only pictures taken with a [ ] aspect ratio can be converted. • You may not be able to convert pictures taken on other equipment. 2Move / to select a picture and then move . • If you select and set a picture with an aspect ratio other than [ ], the message [CANNOT BE SET ON THIS PICTURE] is displayed on the screen. 3Move to determine the horizontal position and press the shutter button to set. DELETE ORIGINAL PICTURE? TRIMMING NO SELECTSETMENUCANCEL YES /SETMENU [ASPECT CONV.] Changing the aspect ratio of a 16:9 picture /SETMENU SETMENUSELECT FORMAT PLAYASPECT CONV. /SETMENU 3/3 SETSELECT ASPECTCONV.100_ 00011/3 EXITMENU EXITMENUSET : SHUTTER ADJUST. Downloaded From camera-usermanual.com Panasonic Manuals