Panasonic Lumix DMC FX50 User Manual

Menu Settings
91VQT0Y19
• Use / to set the frame position for 
pictures rotated vertically.
• The message [DELETE ORIGINAL 
PICTURE?] appears.
4Move /to select [YES] or [NO] 
and then press [MENU/SET].
• The picture is overwritten when you 
select [YES]. If you convert the aspect 
ratio of a picture and then overwrite it, 
you cannot restore it.
• A picture with the converted aspect ratio 
is newly created when you select [NO].
• When the original picture is protected, 
you cannot overwrite it....

Connecting to other equipment
92VQT0Y19
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC 
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] (for 
Windows
®) in the CD-ROM (supplied) 
allows you to easily acquire pictures 
recorded with the camera to a PC, print 
them and send them by e-mail.
If you use “Windows98/98SE”, install 
the USB driver and then connect it to 
the computer.
For information about installing [LUMIX 
Simple Viewer] etc.,...

Connecting to other equipment
93VQT0Y19
wAbout motion picture playback on a PC
Use the software “QuickTime” 
(for Windows 2000/XP) in the CD-ROM 
(supplied) to play back motion pictures 
recorded on this camera on a PC.
• If you use “Windows 98/98SE/Me”, 
download “QuickTime6.5.2 for PC” from 
the following site, and install it.
http://www.apple.com/support/quicktime/
• This software is installed as standard on a 
“Macintosh OS”.
wFolder Composition
Folders are displayed as shown in the 
following...

Connecting to other equipment
94VQT0Y19
wAbout the PTP conection
If the OS is “Windows XP” or “Mac OS X”, 
you can connect in PTP mode if you set the 
camera to [ ] mode and then connect to 
your PC.
• Pictures can only be read on the camera. 
They cannot be written to a card or 
deleted.
• When there are 1000 or more pictures on 
a card, the pictures may not be imported.
• Do not use any other USB connection 
cables except the supplied one.
• Do not disconnect the USB connection 
cable while [ACCESS] is...

Connecting to other equipment
95VQT0Y19
Printing the Pictures
By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to print and start printing on the 
camera’s screen.
Set print settings such as the print quality 
on the printer beforehand. (Read the printer 
operating instructions.)
: USB connection cable (supplied)
: AC adaptor (DMW-AC5; optional)
• It may take time to print some pictures. 
Use a battery with...

Connecting to other equipment
96VQT0Y19
wSelecting a single picture and printing 
it
1Move / to select the picture 
and then press [MENU/SET].
• The message disappears in about 
2 seconds.
2Move  to select [PRINT START] 
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing 
halfway.
3Disconnect the USB connection 
cable after printing.
wSelecting multiple pictures and 
printing them
1Move .
2Move / to select an item and 
then press [MENU/SET].
_This only appears when [FAVORITE] 
(P82)...

Connecting to other equipment
97VQT0Y19
3Move to select [PRINT START] 
and then press
[MENU/SET].
• [PRINT WITH DATE] and 
[NUM. OF PRINTS] are not displayed 
when [DPOF PICTURE] is set.
• Press [MENU/SET] to cancel printing.
• When you select [MULTI SELECT], 
[SELECT ALL] or [FAVORITE], a print 
confirmation screen appears. Select 
[YES] and print the pictures.
• The message [PRINTING ## 
PICTURE(S) DO YOU WANT TO 
PROCEED ?] appears on the print 
confirmation screen if the number of 
prints is more...

Connecting to other equipment
98VQT0Y19
•[PAGE LAYOUT]
(Layouts for printing that can be set with 
this unit)
• An item cannot be selected if the printer 
does not support the page layout.
wSetting the date printing with the 
DPOF print in advance
We recommend setting DPOF date printing 
with [DPOF PRINT] (P86) in advance when 
the printer supports it. If you select 
[DPOF PICTURE], printing starts and the 
recording date is printed.
wLayout printing
• When printing a picture several times 
on 1 sheet of...

Connecting to other equipment
99VQT0Y19
Playing Back Pictures 
on a TV Screen
wPlaying back pictures using the AV 
cable (supplied)
• Set the aspect of the TV on the camera. 
(P22)
• Turn the camera and the TV off.
1Connect the AV cable 
(supplied) to the [AV OUT] socket 
on the camera.
• Connect the AV cable with the [ ] 
mark facing the [] mark on the 
[AV OUT] socket.
• Hold the AV cable at  and insert 
straight in or take straight out.
2Connect the AV cable to the video 
input and the audio input...

Others
100VQT0Y19
Others
Screen Display
In recording
1 Recording mode (P23)
2 Flash mode (P39)
3 Burst (P47)
: Audio recording (P62, 76)
4 White balance (P71)
5 ISO sensitivity (P73)
6 Focus (P23)
7 Picture size (P75)
8 Quality (P75)
In Motion picture mode (P62)
/// (4:3)
/  (16:9)
: Jitter alert (P25)
9 Battery indication (P13)
10 Color effect mode (P79)11 Number of recordable pictures/
Available recording time
e.g. In Motion picture mode 
(P62):
12 Card access indication (P16)
13 Recording state
14...