Panasonic LUMIX DMC FS8 User Manual

- 111 -
Advanced (Playback)
∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.• You cannot select [CANCEL] if not even one picture has been set for printing.
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISPLAY].
• When you go to a photo printing store for digital printing, be sure to...

Advanced (Playback)
- 112 -
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P21)
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
∫Cancelling all the [PROTECT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.• If you press [MENU/SET] while cancelling protection, the cancelling will...

- 113 -
Advanced (Playback)
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu. (P21)
Press 3/4 to select the copy destination and then 
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES], and then press [MENU/
SET].
• If you press [MENU/SET] while copying pictures from the built-in 
memory to the card, the copying will stop halfway.
• Do...

Connecting to other equipment
- 114 -
Connecting to other equipmentConnecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.• You can easily print out or mail the pictures you have imported. Use of the 
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of 
doing this.
• Read the separate operating instructions for the supplied software for more information about 
the software in the CD-ROM (supplied) and how to install it....

- 115 -
Connecting to other equipment
Connect the camera to a PC via the USB connection cable A 
(supplied).
• Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause a malfunction.
Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫Disconnecting the USB connection cable safely• Proceed with the hardware removal using “Safely...

Connecting to other equipment
- 116 -
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures are taken in the following situations.
• After [NO.RESET] (P27) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another maker of camera)
• When there is a picture with file number 999 inside the folder
∫Connection in the PTP mode...

- 117 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
AUSB connection cable (supplied)
• Check the directions of the...

Connecting to other equipment
- 118 -
Note• This unit cannot stand upright when the AC adaptor is connected. When operating it on a flat 
surface, we recommend placing it on a soft cloth.
• Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB...

- 119 -
Connecting to other equipment
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favourites. (P109)
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/
SET].
• If the print check screen has appeared, select [YES], and print 
the pictures.
ItemDescription of settings
[MULTI SELECT]Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then when [DISPLAY] is 
pressed, [
é] appears on the pictures...

Connecting to other equipment
- 120 -
Select and set the items both on the screen in step 2 of the 
“Selecting a single picture and printing it” and in step 3 of the 
“Selecting multiple pictures and printing them” procedures.
• When you want to print pictures in a paper size or a layout which is not 
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{] 
and then set the paper size or the layout on the printer. (For details, 
refer to the operating instructions of the printer.)
• When [PRINT...